Microbial fuel cells (MFCs) can generate electricity from the oxidation of organic substrates using anodic exoelectrogenic bacteria and have great potential for harvesting electric energy from wastewater. Improving oxygen reduction reaction (ORR) performance at a neutral pH is needed for efficient energy production. Here we show a nitrogen doped (≈4 wt%) ionothermal carbon aerogel (NDC) with a high surface area, large pore volume, and hierarchical porosity, with good electrocatalytic properties for ORR in MFCs. The MFCs using NDC air cathodes achieved a high maximum power density of 2300 mW m , which was 1.7 times higher than the most commonly used Pt/C air cathodes and also higher than most state-of-the-art ORR catalyst air cathodes. Rotating disk electrode measurements verified the superior electrocatalytic activity of NDC with an efficient four-electron transfer pathway (n=3.9). These findings highlight NDC as a better-performing and cost-efficient catalyst compared with Pt/C, making it highly viable for MFC applications.

Download full-text PDF

Source
http://dx.doi.org/10.1002/cssc.201600590DOI Listing

Publication Analysis

Top Keywords

air cathodes
16
carbon aerogel
8
microbial fuel
8
fuel cells
8
high-performance carbon
4
air
4
aerogel air
4
cathodes
4
cathodes microbial
4
cells microbial
4

Similar Publications

Microbial Fuel Cells (MFCs) are innovative environmental engineering systems that harness the metabolic activities of microbial communities to convert chemical energy in waste into electrical energy. However, MFC performance optimization remains challenging due to limited understanding of microbial metabolic mechanisms, particularly with complex substrates under realistic environmental conditions. This study investigated the effects of substrate complexity (acetate vs.

View Article and Find Full Text PDF

Improved performances toward electrochemical carbon dioxide and oxygen reductions by iron-doped stannum nanoparticles.

Nanoscale

January 2025

MOE Key Laboratory of New Processing Technology for Nonferrous Metals and Materials, School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China.

The CO reduction reaction (CORR) and oxygen reduction reaction (ORR) show great promise for expanding the use of renewable energy sources and fostering carbon neutrality. Sn-based catalysts show CORR activity; however, they have been rarely reported in the ORR. Herein, we prepared a nitrogen-carbon structure loaded with Fe-doped Sn nanoparticles (Fe-Sn/NC), which has good ORR and CORR activity.

View Article and Find Full Text PDF

Industrial production of hydrogen peroxide (HO) is energy-intensive and generates unwanted byproducts. Herein, an alternative production strategies of HO are demonstrated in a Zn-air and a photoelectrochemical cell. Employing an optimally produced reduced graphene oxide (rGO) electrocatalyst@air-cathode, an impressive power density of 320 Wm (geo = geometric area) is achieved along with a high HO production rate of 3.

View Article and Find Full Text PDF

Fabrication of TeNT/TeO heterojunction based sensor for ultrasensitive detection of NO.

J Hazard Mater

January 2025

School of Integrated Circuits, Dalian University of Technology, Dalian, Liaoning 116024, China. Electronic address:

Tellurium nanotubes (TeNT) heterojunction with Tellurium oxide (TeO) were prepared by in situ oxidation at elevated temperatures in air. The chemiresistive type NO sensor was then fabricated by depositing the synthesized TeNT/TeO on the integrated gold electrodes. The response of the TeNT/TeO based sensor to 600 ppb NO was 38.

View Article and Find Full Text PDF

Integrated system for electrolyte recovery, product separation, and CO capture in CO reduction.

Nat Commun

January 2025

School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control, National Engineering Laboratory for VOCs Pollution Control Technology and Equipment, South China University of Technology, Guangzhou, 510006, China.

Challenges in CO capture, CO crossover, product separation, and electrolyte recovery hinder electrocatalytic CO reduction (COR). Here, we present an integrated electrochemical recovery and separation system (ERSS) with an ion separation module (ISM) between the anode and cathode of a water electrolysis system. During ERSS operation, protons from the anolyte flow through the anodic cation exchange membrane (CEM) into the ISM, acidifying the COR effluent electrolyte.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!