TEMPO-oxidized cellulose nanofibers (TOCNs) as a green reinforcement for waterborne polyurethane coating (WPU) on wood.

Carbohydr Polym

Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science & Technology, Tianjin 300457, China; Limerick Pulp & Paper Centre, Department of Chemical Engineering, University of New Brunswick, Fredericton, New Brunswick E3B 5A3, Canada. Electronic address:

Published: October 2016

In this work, TEMPO-oxidized cellulose nanofibers (TOCNs) were investigated as a green additive to the waterborne polyurethane (WPU) based coating, for improving its mechanical properties. The structure, morphology, mechanical properties and performances of the WPU/TOCNs coating were determined. Results showed that TOCNs had good compatibility to the WPU coating, and significantly enhanced the mechanical properties of the coating. The Halpin-Tsai and Ouali models were used to fit for the Young's modulus of the resulting coating, and good agreements were found between the Ouali model and experimental results when the TOCNs content exceeded the critical percolation threshold (0.7vol% or 1.0wt%). It was also found that the pencil hardness of the coating was improved with the addition of TOCNs. However, AFM and pull-off test revealed the negative effects of the TOCNs addition on the surface roughness and adhesion strength of the coating to the wood surface.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.carbpol.2016.05.083DOI Listing

Publication Analysis

Top Keywords

mechanical properties
12
tempo-oxidized cellulose
8
cellulose nanofibers
8
nanofibers tocns
8
waterborne polyurethane
8
coating
8
tocns
6
tocns green
4
green reinforcement
4
reinforcement waterborne
4

Similar Publications

The approaches used to determine the medicinal properties of the plants are often destructive, labor-intensive, time-consuming, and expensive, making it impossible to analyze their quality analysis online. Performance of hyperspectral imaging (HSI) integrated with intelligent techniques to overcome these problems was investigated in this research. For this purpose, three classification methods-support vector machine, random forest (RF), and extreme gradient boosting-were studied for the classification of plants in three classes of medicinal, edible, and ornamental for the organs of leaf, stem, flower, and root.

View Article and Find Full Text PDF

Chitosan (CHT) is a known piezoelectric biomacromolecule; however, its usage is limited due to rapid degradation in an aqueous system. Herein, we prepared CHT film via a solvent casting method and cross-linked in an alkaline solution. Sodium hydroxide facilitated deprotonation, leading to increased intramolecular hydrogen bonding and mechanical properties.

View Article and Find Full Text PDF

Enhanced bone cement for fixation of prosthetic joint utilizing nanoparticles.

J Mater Sci Mater Med

January 2025

Biomedical Engineering Department, Faculty of Engineering, Helwan University, Cairo, Egypt.

Bone cement is commonly utilized to secure prosthetic joints in the body because of its robust fixation, stability, biocompatibility, and immediate load-bearing capability. However, issues such as loosening, leakage, and insufficient bioactivity can lead to its failure. Therefore, improving its mechanical, physical, and biological properties is crucial for enhancing its efficiency.

View Article and Find Full Text PDF

The suitability of a range of interatomic potentials for elemental tin was evaluated in order to identify an appropriate potential for modeling the stanene (2D tin) allotropes. Structural and mechanical features of the flat (F), low-buckled (LB), high-buckled (HB), full dumbbell (FD), trigonal dumbbell (TD), honeycomb dumbbell (HD), and large honeycomb dumbbell (LHD) monolayer tin (stanene) phases, were gained by means of the density functional theory (DFT) and molecular statics (MS) calculations with ten different Tersoff, modified embedded atom method (MEAM), and machine-learning-based (ML-IAP) interatomic potentials. A systematic quantitative comparison and discussion of the results is reported.

View Article and Find Full Text PDF

The high content of vitamin E, including tocopherols and tocotrienols (TCF-TTE), in palm oil () has made it a promising candidate for the alternative treatment of atopic dermatitis (AD). However, the limited solubility of TCF-TTE has restricted its therapeutic efficacy. In this study, pluronic-based micelles (MCs) encapsulating palm oil-derived TCF-TTE were formulated with dissolvable microarray patch-micelles (DMP-MC) using carboxymethyl cellulose (CMC) synthesized from empty fruit bunches of palm to optimize its delivery for AD.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!