The International Commission on Non-Ionizing Radiation Protection issued guidelines in 1998 for limiting public and occupational exposure to radiofrequency electromagnetic fields (100 kHz to 300 GHz). As part of the process of updating this advice, a 2-d workshop titled "A closer look at the thresholds of thermal damage" was held from 26-28 May 2015 in Istanbul to re-examine the thermal basis of the guidelines and to provide further information on heat-related effects and thresholds of thermal damage. Overall, the workshop provided much useful information relevant to revision of the guidelines. Participants indicated that the effects of heating from radiofrequency fields are consistent with those from other sources, and that the information derived from those studies can be applied to radiofrequency-induced heating. Another conclusion was that absolute temperature of tissues was more important for thermal damage than temperature change. The discussion suggested that the 6-min averaging time used in international guidelines was valid for whole-body exposures but with a large uncertainty: 30 min may be a more appropriate averaging time for localized exposures, and less than 1 min for implanted medical devices. The duration of whole-body radiofrequency exposure is a critical parameter that often determines the effect threshold, but this will be affected by other, ongoing thermoregulation, which is dependant on many factors. The thresholds for localized radiofrequency exposure were difficult to determine because of the potential range of exposure conditions and the possibility of radiofrequency-induced local hotspots. Suggestions for future dose metrics and further research were discussed and are included in this report.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4972475 | PMC |
http://dx.doi.org/10.1097/HP.0000000000000539 | DOI Listing |
Mol Med
January 2025
Division of Spine Surgery, Department of Orthopedics, Nanfang Hospital, Southern Medical University, 1838 North Guangzhou Ave, Guangzhou, 510515, People's Republic of China.
Background: Neuropathic pain (NP) is a debilitating condition caused by lesion or dysfunction in the somatosensory nervous system. Accumulation of advanced oxidation protein products (AOPPs) is implicated in mechanical hyperalgesia. However, the effects of AOPPs on NP remain unclear.
View Article and Find Full Text PDFPhytomedicine
January 2025
Department of Pharmacy, Xijing Hospital, Fourth Military Medical University, Changle West Street 15, Xi'an, Shaanxi, 710032, China. Electronic address:
Background: The pathogenesis of neuropathic pain is complex and lacks effective clinical treatment strategies. Medical plants and herbal extracts from traditional Chinese medicine with multi-target comprehensive effects have attracted great attention from scientists.
Purpose: To investigate the pharmacological active components and mechanism underlying the anti-neuralgia effect of classic analgesic formulas Duhuo Jisheng Mixture (DJM).
Polymers (Basel)
January 2025
Faculty of Science and Industrial Technology, Prince of Songkla University, Surat Thani Campus, Surat Thani 84000, Thailand.
This research examines the possibility of palm oil and oil palm trunk biochar (OPTB) from pyrolysis effectively serving as alternative processing oils and fillers, substituting petroleum-based counterparts in natural rubber (NR) composites. Chemical, elemental, surface and morphological analyses were used to characterize both carbon black (CB) and OPTB, by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) gas porosimetry, and scanning electron microscopy (SEM). The influences of OPTB contents from 0 to 100 parts per hundred rubber (phr) on thermal, dielectric, dynamic mechanical, and cure characteristics, and the key mechanical properties of particulate NR-composites were investigated.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Department of Transport Engineering, Faculty of Mechanical Engineering and Design, Kaunas University of Technology, 44249 Kaunas, Lithuania.
Cyclic failure problems in layered ductile iron are evident in a wide range of elements in transportation and mining equipment and depend on production technology and operating conditions. The aim of this study was to analyze the effect of residual stresses on the behavior of cyclic and static failure. The stress intensity factor, crack initiation, propagation patterns, static tension diagrams, and fracture behavior of compact tension (CT) specimens were determined.
View Article and Find Full Text PDFMicromachines (Basel)
January 2025
College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China.
The short-circuit (SC) robustness of SiC MOSFETs is critical for high-power applications, yet 1.2 kV devices often struggle to meet the industry-standard SC withstand time (SCWT) under practical operating conditions. Despite growing interest in higher voltage classes, no prior study has systematically evaluated the SC performance of 1.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!