Ti-C:H coatings were deposited on original, nitrided, and polished-nitrided AISI 316L stainless steel substrates using a closed field unbalanced magnetron sputtering system. Sliding friction wear tests were performed in 0.89 wt.% NaCl solution under a load of 30 N against AISI 316L stainless steel, Si3N4, and Ti6Al4V balls, respectively. The electrochemical properties of the various specimens were investigated by means of corrosion tests performed in 0.89 wt.% NaCl solution at room temperature. Finally, the biocompatibility properties of the specimens were investigated by performing cell culturing experiments using purified mouse leukemic monocyte macrophage cells (Raw264.7). In general, the results showed that plasma nitriding followed by Ti-C:H coating deposition provides an effective means of improving the wear resistance, anti-corrosion properties, and biocompatibility performance of AISI 316L stainless steel.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1177/0885328216660378 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Surface modification of AISI 316L stainless steel by applying single and multilayer coatings: Study of elastic modulus and antibacterial properties.
Heliyon
January 2025
Department of Materials Engineering, Babol Noshirvani University of Technology, Mazandaran, Iran.
AISI 316L stainless steel is extensively used in various fields, including medicine. In this study, in order to improve antibacterial properties, reduce elastic modulus, increase hydrophilicity and delay corrosion on the surface of AISI 316L stainless steel pieces for biomedical applications, zinc and magnesium elements were used for coating. Zn monolayer, Zn-Mg bilayer, and Zn-Mg-Zn triple coatings were deposited on AISI 316L substrates using the thermal evaporation method.
View Article and Find Full Text PDFTracing the Formation of Femtosecond Laser-Induced Periodic Surface Structures (LIPSS) by Implanted Markers.
ACS Appl Mater Interfaces
January 2025
Institute of Materials Science and Engineering, Chemnitz University of Technology, Erfenschlager Straße 73, Chemnitz 09125, Germany.
The generation of laser-induced periodic surface structures (LIPSS) using femtosecond lasers facilitates the engineering of material surfaces with tailored functional properties. Numerous aspects of their complex formation process are still under debate, despite intensive theoretical and experimental research in recent decades. This particularly concerns the challenge of verifying approaches based on electromagnetic effects or hydrodynamic processes by experiment.
View Article and Find Full Text PDFElectron Beam Welding of Dissimilar Stainless Steel and Maraging Steel Joints.
Materials (Basel)
November 2024
Faculty of Manufacturing Technologies, Technical University of Košice with a Seat in Prešov, 080 01 Prešov, Slovakia.
The incorporation of additive manufactured (AM) metal parts to real assemblies is a crucial issue for the increasing of their industrial utilization. The presented research is devoted to the electron beam welding (EBW) of dissimilar steel joints. Dissimilarity is defined by the various types of steel and manufacturing processes used for the creation of specimens.
View Article and Find Full Text PDFA Deep Learning Model for Estimating the Quality of Bimetallic Tracks Obtained by Laser Powder-Directed Energy Deposition.
Materials (Basel)
November 2024
Department of Mechanical Engineering, São Carlos School of Engineering (EESC), University of São Paulo (USP), São Carlos 13566-590, Brazil.
During the fabrication of Inconel 718-AISI 316L bimetallic components via laser powder-directed energy deposition, understanding the relationships between processes, microstructures, and material properties is crucial to obtaining high-quality parts. Physical-chemical properties, cooling rates, and thermal expansion coefficients of each material may affect the microstructure of parts, generating segregations and cracks. This paper analyzes how the process parameters affect the dimensions, chemical composition, and microhardness of bimetallic tracks.
View Article and Find Full Text PDFOn the Development of Smart Framework for Printability Maps in Additive Manufacturing of AISI 316L Stainless Steel.
3D Print Addit Manuf
June 2024
Mechanical Engineering Program, Texas A&M University at Qatar, Doha, Qatar.
Article Synopsis
- Scientists created a method to make "printability maps" for 3D printing with a special kind of metal called AISI 316L stainless steel.
- They looked at different problems that can happen when printing, like missing parts or blob formation, and used experiments to check if their computer models were correct.
- Finally, they used their validated model to gather data and create smart maps that help identify the best settings to print strong and perfect metal parts without defects.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!