Production of chemical fuels by direct solar energy conversion in a photoelectrochemical cell is of great practical interest for developing a sustainable energy system. Various nanoscale designs such as nanowires, nanotubes, heterostructures and nanocomposites have been explored to increase the energy conversion efficiency of photoelectrochemical water splitting. Here we demonstrate a self-organized nanocomposite material concept for enhancing the efficiency of photocarrier separation and electrochemical energy conversion. Mechanically robust photoelectrodes are formed by embedding self-assembled metal nanopillars in a semiconductor thin film, forming tubular Schottky junctions around each pillar. The photocarrier transport efficiency is strongly enhanced in the Schottky space charge regions while the pillars provide an efficient charge extraction path. Ir-doped SrTiO3 with embedded iridium metal nanopillars shows good operational stability in a water oxidation reaction and achieves over 80% utilization of photogenerated carriers under visible light in the 400- to 600-nm wavelength range.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4895796 | PMC |
| http://dx.doi.org/10.1038/ncomms11818 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
One-Step Epitaxy of Transition Metal Nitride Nanopillar Arrays with an Oxidation-Tunable Hyperbolic Dispersion.
ACS Appl Mater Interfaces
January 2025
Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.
The controllable synthesis of epitaxial nanopillar arrays is fundamentally important to the development of advanced electrical and optical devices. However, this fascinating growth method has rarely been applied to the bottom-up synthesis of plasmonic nanostructure arrays (PNAs) with many broad, important, and promising applications in optical sensing, nonlinear optics, surface-enhanced spectroscopies, photothermal conversion, photochemistry, etc. Here, a one-step epitaxial approach to single-crystalline NbTiN (NbTiN) nanopillar arrays based on the layer plus island growth mode is demonstrated by strain engineering.
View Article and Find Full Text PDFRealizing Square-Ordered Nanopillars with a 0.1-Tera-Density through a Superimposed Masking Strategy for Advanced Surface-Enhanced Raman Spectroscopy.
ACS Appl Mater Interfaces
December 2024
Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea.
Article Synopsis
- Widespread interest in nanoscale pillar structures for optical devices faces challenges like high equipment costs and limited scalability due to traditional manufacturing methods.
- The study introduces a novel technique using thermally assisted nanotransfer printing to create highly uniform nanoscale pillar arrays, achieving an impressive density of 0.1 tera-pillars per square inch.
- These nanopillars are demonstrated as effective surface-enhanced Raman scattering sensors, providing consistent performance and sensitivity at very low concentrations while maintaining durability for multiple uses.
Dislocation Evolution in Cyclic-Loaded Cu Nanopillars with Different Configurations.
Small
December 2024
Center of Electron Microscopy, State Key Laboratory of Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, China.
Article Synopsis
- Small-sized metals, like Cu nanopillars, behave differently under cyclic loading compared to larger metals because their limited space affects how dislocations form and move.* -
- The study used in situ transmission electron microscopy to observe how dislocation tangles develop in single and twinned nanopillars during fatigue tests and identified the effects of slip systems.* -
- Nanopillars with low-angle grain boundaries showed degradation due to cycling, leading to the release of grain boundary dislocations which helped support the structure under repeated stress.*
Simultaneously Enhancing Brightness and Purity of WSe Single Photon Emitter Using High-Aspect-Ratio Nanopillar Array on Metal.
Nano Lett
October 2024
Department of Electrical Communication Engineering, Indian Institute of Science, Bangalore 560012, India.
A monolayer semiconductor transferred on nanopillar arrays provides site-controlled, on-chip single photon emission, which is a scalable light source platform for quantum technologies. However, the brightness of these emitters reported to date often falls short of the perceived requirement for such applications. Also, the single photon purity usually degrades as the brightness increases.
View Article and Find Full Text PDFTailoring polarization in WSe quantum emitters through deterministic strain engineering.
NPJ 2D Mater Appl
September 2024
Department of Electrical and Photonics Engineering, Technical University of Denmark, Ørsteds Plads, 2800 Kongens Lyngby, Denmark.
Quantum emitters in transition metal dichalcogenides (TMDs) have recently emerged as a promising platform for generating single photons for optical quantum information processing. In this work, we present an approach for deterministically controlling the polarization of fabricated quantum emitters in a tungsten diselenide (WSe) monolayer. We employ novel nanopillar geometries with long and sharp tips to induce a controlled directional strain in the monolayer, and we report on fabricated WSe emitters producing single photons with a high degree of polarization (99 ± 4%) and high purity ( (0) = 0.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!