Recently developed organic-inorganic hybrid perovskite solar cells combine low-cost fabrication and high power conversion efficiency. Advances in perovskite film optimization have led to an outstanding power conversion efficiency of more than 20%. Looking forward, shifting the focus toward new device architectures holds great potential to induce the next leap in device performance. Here, we demonstrate a perovskite/perovskite heterojunction solar cell. We developed a facile solution-based cation infiltration process to deposit layered perovskite (LPK) structures onto methylammonium lead iodide (MAPI) films. Grazing-incidence wide-angle X-ray scattering experiments were performed to gain insights into the crystallite orientation and the formation process of the perovskite bilayer. Our results show that the self-assembly of the LPK layer on top of an intact MAPI layer is accompanied by a reorganization of the perovskite interface. This leads to an enhancement of the open-circuit voltage and power conversion efficiency due to reduced recombination losses, as well as improved moisture stability in the resulting photovoltaic devices.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsnano.6b01535 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
PiNN: Equivariant Neural Network Suite for Modeling Electrochemical Systems.
J Chem Theory Comput
January 2025
Department of Chemistry-Ångström Laboratory, Uppsala University, Lägerhyddsvägen 1, P.O. Box 538, 75121 Uppsala, Sweden.
Electrochemical energy storage and conversion play increasingly important roles in electrification and sustainable development across the globe. A key challenge therein is to understand, control, and design electrochemical energy materials with atomistic precision. This requires inputs from molecular modeling powered by machine learning (ML) techniques.
View Article and Find Full Text PDFA simple cavity-enhanced laser-based heater for reflective samples.
Rev Sci Instrum
January 2025
Institute for Physical Chemistry, University of Göttingen, 37077 Göttingen, Germany.
Surface science instruments require excellent vacuum to ensure surface cleanliness; they also require control of sample temperature, both to clean the surface of contaminants and to control reaction rates at the surface, for example, for molecular beam epitaxy and studies of heterogeneous catalysis. Standard approaches to sample heating within high vacuum chambers involve passing current through filaments of refractory metals, which then heat the sample by convective, radiative, or electron bombardment induced heat transfer. Such hot filament methods lead to outgassing of molecules from neighboring materials that are inadvertently heated; they also produce electrons and ions that may interfere with other aspects of the surface science experiment.
View Article and Find Full Text PDFEnhancing a Perovskite Solar Cell and Module by Suppressing Protonation through Chelating Agents.
ACS Appl Mater Interfaces
January 2025
Institute of New Energy Technology, College of Physics and Optoelectronic Engineering, Jinan University, Guangzhou 510632, Guangdong, China.
Formamidinium-based perovskites (FA perovskites) often incorporate methylammonium chloride (MACl) to stabilize the α-FAPbI phase and prevent formation of the δ phase. However, MACl undergoes deprotonation and reacts with FA, leading to the generation of unstable byproducts that can cause component degradation and negatively impact the device performance. In this study, we introduce ethylenediaminetetramethylenephosphonic acid as a corrosion inhibitor, which effectively prevents the formation of these byproducts and stabilizes α-FAPbI.
View Article and Find Full Text PDFPrecise morphology control of all-organic core-shell droplets for synthesis of microencapsulated phase change materials through AC electric fields.
J Colloid Interface Sci
January 2025
National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics, Research Institute of Aero-Engine, Beihang University, Beijing 100191, China. Electronic address:
Hypothesis: Complex emulsions usually consist of aqueous phases, like oil-in-water-in-oil (o/w/o) and water-in-oil-in-water (w/o/w), serving foundational roles in colloid science. Oil-in-oil-oil (o/o/o) emulsions offer new avenues for non-aqueous reagents but face challenges in balancing the forces between multiple organic phases.
Experiments: In this work, we generate o/o/o emulsions by integrating an AC electric field with a double cross-junction microchannel.
Impact of - and -Direction External Side Chains in Y-Series Acceptors on the Molecular Packing and Charge Carrier Dynamics of Organic Photovoltaics.
ACS Appl Mater Interfaces
January 2025
Department of Hydrogen and Renewable Energy, Kyungpook National University, Daegu 41566, Republic of Korea.
The side-chain directions in nonfullerene acceptors (NFAs) strongly influence the intermolecular interactions in NFAs; however, the influence of these side chains on the morphologies and charge carrier dynamics of Y6-based acceptors remains underexplored. In this study, we synthesize four distinct Y6-based acceptors, i.e.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!