We fabricated perovskite solar cells with enhanced device efficiency based on vertically oriented TiO2 nanostructures using a nanoporous template of block copolymers (BCPs). The dimension and shape controllability of the nanopores of the BCP template allowed for the construction of one-dimensional (1-D) TiO2 nanorods and two-dimensional (2-D) TiO2 nanowalls. The TiO2 nanorod-based perovskite solar cells showed a more efficient charge separation and a lower charge recombination, leading to better performance compared to TiO2 nanowall-based solar cells. The best solar cells employing 1-D TiO2 nanorods showed an efficiency of 15.5% with VOC = 1.02 V, JSC = 20.0 mA cm(-2) and fill factor = 76.1%. Thus, TiO2 nanostructures fabricated from BCP nanotemplates could be applied to the preparation of electron transport layers for improving the efficiency of perovskite solar cells.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c6nr01010e | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Enhancing photovoltaic efficiency in Half-Tandem MAPbI/ MASnI Perovskite solar cells with triple core-shell plasmonic nanoparticles.
Sci Rep
January 2025
Department of Electrical and Computer Engineering, Aarhus University, Aarhus, 8200, Denmark.
Significant progress has been made through the optimization of modelling and device architecture solar cells has proven to be a valuable and highly effective approach for gaining a deeper understanding of the underlying physical processes in solar cells. Consequently, this research has conducted a two-dimensional (2D) perovskite solar cells (PSCs) simulation to develop an accurate model. The approach utilized in this study is based on the finite element method (FEM).
View Article and Find Full Text PDFTowards all inorganic antimony sulphide semitransparent solar cells.
Sci Rep
January 2025
Laboratory for Thin Film Energy Materials, Department of Materials and Environmental Technology, School of Engineering, Tallinn University of Technology, Ehitajate tee 5, Tallinn, 19086, Estonia.
NiO, a wide band gap hole-transporting material (HTM), is gaining attention in photovoltaics due to its optical transparency, chemical stability, and favourable band alignment with absorber. This study uses NiO nanoparticle-based HTM in semi-transparent SbS solar cells via a simple chemical precipitation method. We optimised NiO layer by varying precursor solution concentration and studied its impact on optical and structural properties, composition of nanoparticles and subsequent effect on the performance of semi-transparent SbS solar cell.
View Article and Find Full Text PDFFluorinated-Quinoxaline Based Non-Fused Electron Acceptors Enables Efficient As-Cast Organic Solar Cells.
Chemistry
January 2025
Shandong Normal University, Chemistry, No.88 Wenhua East Road, 250014, Jinan, CHINA.
Non-fused electron acceptors have obtained increasing curiosity in organic solar cells (OSCs) thanks to simple synthetic route and versatile chemical modification capabilities. However, non-fused acceptors with varying quinoxaline core and as-cast device have rarely been explored, and the molecular structure-photovoltaic performance relationship of such acceptors remains unclear. Herein, two non-fused acceptors L19 and L21 with thienyl substituted non-fluorinated/fluorinated quinoxaline core were developed via five-step synthesis.
View Article and Find Full Text PDFWafer-scale monolayer MoS film integration for stable, efficient perovskite solar cells.
Science
January 2025
Beijing Key Laboratory for Theory and Technology of Advanced Battery Materials, Key Laboratory of Polymer Chemistry and Physics of Ministry of Education, School of Materials Science and Engineering, Peking University, Beijing, China.
One of the primary challenges in commercializing perovskite solar cells (PSCs) is achieving both high power conversion efficiency (PCE) and sufficient stability. We integrate wafer-scale continuous monolayer MoS buffers at the top and bottom of a perovskite layer through a transfer process. These films physically block ion migration of perovskite into carrier transport layers and chemically stabilize the formamidinium lead iodide phase through strong coordination interaction.
View Article and Find Full Text PDFSolar-Driven Thermally Regenerative Electrochemical Cells for Continuous Power Generation with Coupled Optical and Thermal Integration.
ACS Appl Mater Interfaces
January 2025
Shenzhen Key Laboratory of Intelligent Robotics and Flexible Manufacturing Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen 518055, China.
This study presents the development of a solar-driven thermally regenerative electrochemical cell (STREC) for continuous power generation. Key innovations include dual-function carbon-based electrodes for efficient solar absorption and electrochemical reactions, a transparent and ultrainsulating silica aerogel to maximize solar spectrum transmission while minimizing heat loss, and a compact heat exchanger to recover heat from hot cell streams. Under 1 sun conditions, the STREC achieves a power density of 912.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!