Purpose: The aim of this in vitro study was to assess the resistance to static fatigue of implants with different connections before and after implantoplasty.

Materials And Methods: Sixty conical implants and 60 abutments were used; 4-mm-diameter versions were available for each model. Three groups (n = 20) were established based on the following implant connections: external hexagon (group 1), internal hexagon (group 2), and Morse taper (group 3). The implants of each group were submitted to a compressive load before (n = 10) and after the implantoplasty (n = 10). The wear was performed in a mechanical lathe machine using a carbide bur, and the final dimensions of each sample were measured. All groups were subjected to quasi-static loading at a 30-degree angle to the implant axis in a universal testing machine and 5 mm out of the implant support.

Results: After the implantoplasty, the mean final diameter was 3.13 ± 0.033 mm for group 1, 3.23 ± 0.023 mm for group 2, and 3.25 ± 0.03 mm for group 3. The mean fracture strengths for the groups before and after the implantoplasty were, respectively, 773.1 ± 13.16 N and 487.1 ± 93.72 N in group 1; 829.4 ± 14.12 N and 495.7 ± 85.24 N in group 2; and 898.1 ± 19.25 N and 717.6 ± 77.25 N in group 3.

Conclusion: Resistance to loading decreased significantly after implantoplasty, and varied among the three implant connection designs.

Download full-text PDF

Source
http://dx.doi.org/10.11607/jomi.4399DOI Listing

Publication Analysis

Top Keywords

group
10
connection designs
8
vitro study
8
hexagon group
8
implantoplasty
5
analysis implant
4
implant strength
4
strength implantoplasty
4
implantoplasty three
4
three implant-abutment
4

Similar Publications

Purpose: To develop and validate an MRI-based model for predicting postoperative early (≤2 years) recurrence-free survival (RFS) in patients receiving upfront surgical resection (SR) for beyond Milan hepatocellular carcinoma (HCC) and to assess the model's performance in separate patients receiving neoadjuvant therapy for similar-stage tumors.

Method: This single-center retrospective study included consecutive patients with resectable BCLC A/B beyond Milan HCC undergoing upfront SR or neoadjuvant therapy. All images were independently evaluated by three blinded radiologists.

View Article and Find Full Text PDF

Application value of split-bolus contrast injection combined with dual-energy CT scanning technology in pediatric CTU imaging.

Eur J Radiol

January 2025

Department of Radiology Children's Hospital of Chongqing Medical University, National Clinical Research Center for Child Health and Disorders, Ministry of Education Key Laboratory of Child Development and Disorders, Chongqing Key Laboratory of Child Neurodevelopment and Cognitive Disorders, China. Electronic address:

Objective: To explore the clinical value of combining split-bolus contrast injection with dual-energy CT(DECT) scanning technology in pediatric computed tomography urography (CTU) imaging.

Methods: A total of 128 children aged 0-17 years were prospectively selected and randomly assigned to three groups: A, B, and C. For Group A, a high-pitch flash mode was employed, where a single bolus of contrast agent was followed by four-phase scanning (noncontrast, cortex, medulla, and excretory phases).

View Article and Find Full Text PDF

Objective: Pulmonary pleomorphic carcinoma is a relatively rare and aggressive subtype of non-small cell lung cancer (NSCLC), with a poor prognosis and early recurrence, and is resistant to conventional therapies. This study investigated the efficacy of immune checkpoint inhibitors (ICIs) in improving the survival outcomes of patients with pulmonary pleomorphic carcinoma with postoperative recurrence.

Methods: We conducted a retrospective analysis of 71 patients with pulmonary pleomorphic carcinoma who underwent pulmonary resection at Tokyo Medical University Hospital between 2008 and 2022.

View Article and Find Full Text PDF

A Comprehensive Understanding of Tea Metabolome: From Tea Plants to Processed Teas.

Annu Rev Food Sci Technol

January 2025

4Division of Food and Nutrition, Chonnam National University, Gwangju, Republic of Korea; email:

Tea () is one of the most popular nonalcoholic beverages in the world, second only to water. Six main types of teas are produced globally: green, white, black, oolong, yellow, and Pu-erh. Each type has a distinctive taste, quality, and cultural significance.

View Article and Find Full Text PDF

Most people with mental health needs cannot access treatment; among those who do, many access services only once. Accordingly, single-session interventions (SSIs) may help bridge the treatment gap. We conducted the first umbrella review synthesizing research on SSIs for mental health problems and service engagement in youth and adults.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!