The preparation conditions of electro-modification (current density) and pyrolysis (pyrolysis temperature and heating rate) processes were simultaneously optimized using response surface methodology with the quadratic regression model associated with Box-Behnken design. By numerical optimization, the phosphate adsorption capacity of 245.06mg/g was achieved, corresponding to 99.9% of the predicted values under statistically optimized conditions (current density: 38.78mA/cm(2), pyrolysis temperature: 584.1°C, heating rate: 6.91°C/min). By considering R(2) and three error functions values, the experimental results of adsorption kinetics, and the equilibrium isotherms at different temperatures (10-30°C) showed that predictive pseudo-second-order and Sips isotherm models could adequately interpret the phosphate adsorption process for 'statistically optimized electrically modified'-biochar (SOEM-biochar). The maximum phosphate adsorption capacities of SOEM-biochar were found to be 273.9, 345.1, and 460.3mg/g at 10, 20, and 30°C, respectively, which are higher than that of other adsorbents reported in the literature.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.biortech.2016.05.005 | DOI Listing |
ACS Appl Mater Interfaces
January 2025
Department of Materials Science and Technology, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188, Japan.
Apatite nanoparticles are biocompatible nanomaterials, so their film formation on biodevices is expected to provide effective bonding with living organisms. However, the biodevice-apatite interfaces have not yet been elucidated because there is little experimental evaluation and discussion on the nanoscale interactions, as well as the apatite surface reactivities. Our group has demonstrated the biomolecular adsorption properties on a quartz crystal microbalance with dissipation (QCM-D) sensor coated with apatite nanoparticles, demonstrating the applicability of apatite nanoparticle films on devices.
View Article and Find Full Text PDFWater Res X
May 2025
Key Laboratory of Tropical Marine Bio-resources and Ecology, Guangdong Provincial Key Laboratory of Applied Marine Biology, South China Sea Institute of Oceanology, Chinese Academy of Sciences, Guangzhou 510301, China.
Emerging organophosphate flame retardants (E-OPFRs) are a new class of pollutants that have attracted increasing attention, but their bioaccumulation patterns and trophodynamic behaviors in aquatic food webs still need to be validated by comparison with legacy OPFRs (L-OPFRs). In this study, we simultaneously investigated the bioaccumulation, trophic transfer, and dietary exposure of 8 E-OPFRs and 10 L-OPFRs in a tropical estuarine food web from Hainan Island, China. Notably, the ΣL-OPFRs concentration (16.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Department of Environmental Engineering, Kyungpook National University, 80 Daehak-ro, Buk-gu, Daegu 41566, Republic of Korea. Electronic address:
This study describes the preparation of novel hybrid aerogels derived from gelatin (Gel), incorporating Br-functionalized zirconium-based metal-organic framework (UiO-66-Br; MOF) as modifying agent to effectively eliminate phosphate and fluoride ions from aqueous environments. The adsorption performance of MOF decorated Gel (Gel-xMOF) hybrid aerogels was investigated under different conditions, including agitation time, adsorbent dosage, solution pH, initial phosphate and fluoride concentrations, coexisting ions, and temperature. The functional groups of the gelatin network, coupled with UiO-66-Br, enhanced the adsorption performance of phosphate and fluoride ions from aqueous solutions.
View Article and Find Full Text PDFJ Colloid Interface Sci
January 2025
Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province, School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, PR China. Electronic address:
Environ Pollut
January 2025
School of Chemical and Environmental Engineering, China University of Mining and Technology (Beijing), Beijing, 100083, China.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!