Insight into the adsorption of PPCPs by porous adsorbents: Effect of the properties of adsorbents and adsorbates.

Environ Pollut

State Key Laboratory of Pollution Control and Resources Reuse, School of the Environment, Nanjing University, Nanjing 210023, PR China.

Published: July 2016

Adsorption is an efficient method for removal of pharmaceuticals and personal care products (PPCPs). Magnetic resins are efficient adsorbents for water treatment and exhibit potential for PPCP removal. In this study, the magnetic hypercrosslinked resin Q100 was used for adsorption of PPCPs. The adsorption behavior of this resin was compared with those of two activated carbons, namely, Norit and F400D. Norit exhibited the fastest adsorption kinetics, followed by Q100. Norit featured a honeycomb shape and long-range ordered pore channels, which facilitated the diffusion of PPCPs. Moreover, the large average pore size of Q100 reduced diffusion resistance. The adsorbed amounts of 11 PPCPs on the three adsorbents increased with increasing adsorbate hydrophobicity. For Q100, a significant linear correlation was observed between the adsorption performance for PPCPs and hydrophobicity (logD value) of adsorbates (R(2) = 0.8951); as such, PPCPs with high logD values (>1.69) could be efficiently removed. Compared with those of Norit and F400D, the adsorption performance of Q100 was less affected by humic acid because of the dominant hydrophobic interaction. Furthermore, Q100 showed improved regeneration performance, which renders it promising for PPCP removal in practical applications.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.envpol.2016.04.070DOI Listing

Publication Analysis

Top Keywords

adsorption ppcps
8
ppcp removal
8
norit f400d
8
adsorption performance
8
ppcps
7
adsorption
6
q100
6
insight adsorption
4
ppcps porous
4
adsorbents
4

Similar Publications

FeS-based nanocomposites: A promising approach for sustainable environmental remediation - Focus on adsorption and photocatalysis - A review.

J Environ Manage

December 2024

Department of Sanitary Engineering, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology, Poland; School of Civil, Environmental, and Architectural Engineering, College of Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841, Republic of Korea. Electronic address:

Population expansion, industrialization, urban development, and climate changes increased the water crisis in terms of drinking water availability. Among the various nanomaterials for nanoremediation towards water treatment, FeS-based nanocomposites have emerged as promising candidates in the adsorptive and photocatalytic removal of contaminants. This paper, therefore, evaluates the potential of FeS-based nanocomposites for environmental applications, more specifically the combined use of adsorption and photocatalysis.

View Article and Find Full Text PDF

Dissolved black carbon (DBC) with a hyperconjugated structure is ubiquitous in nature, and plays a crucial role in the migration and transformation of environmental contaminants due to its prominent properties of accepting electrons and sorption. However, little is known about the DBC-induced phototransformation of pharmaceutical and personal care products (PPCPs) in natural waters. Herein, the photodegradation kinetics of PPCPs were investigated in DBC solution under simulated solar irradiation and compared with those in Suwannee River natural organic matter (SRNOM) solution.

View Article and Find Full Text PDF

The rising soil-groundwater quality issues due to pharmaceuticals and personal care products (PPCPs) contamination have spurred significant concern. To understand the sorption characteristics of metformin (MTN) and erythromycin (ETM) in sandy and sandy loam soils with varying organic matter and particle composition, sorption kinetics (single and competitive), isotherms, and thermodynamics were studied. The effects of pH and soil moisture content (SMC) were also investigated at environmentally relevant concentrations.

View Article and Find Full Text PDF

Seeking highly efficient adsorbents for pharmaceuticals and personal care products (PPCPs) removal has been a worldwide continuing endeavor. In this study, a new 3D composite material was synthesized by covalently anchoring Poly(m-Phenylenediamine) onto 3D polyvinyl alcohol modified foam framework (PmPD-MF-PVA). PmPD-MF-PVA was characterized and evaluated for its efficacy in removing diclofenac (DCF), a commonly detected PPCPs in both wastewater and surface water.

View Article and Find Full Text PDF

Differentiated adsorption of acetaminophen and diclofenac via alkyl chain-modified quaternized SBA-15: Insights from molecular simulation.

Chemosphere

October 2024

Department of Urban and Environmental Engineering, Ulsan National Institute of Science and Technology (UNIST), 50 UNIST-gil, Eonyang-eup, Ulju-gun, Ulsan, 44919, Republic of Korea; Graduate School of Carbon Neutrality, Ulsan National Institute of Science and Technology (UNIST), 50 UNIST-gil, Eonyang-eup, Ulju-gun, Ulsan, 44919, Republic of Korea. Electronic address:

The increasing presence of pharmaceuticals and personal care products (PPCPs) in aquatic systems pose significant environmental concerns. This study addresses this issue by synthesizing quaternized mesoporous SBA-15 (Q) with varied alkyl chain lengths of C1Q, C8Q, and C18Q. Q utilizes dual mechanisms: hydrophobic interactions via the alkyl chain and electrostatic attraction/ion exchange via the ammonium group.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!