Motor vehicle exhaust and non-exhaust processes play a significant role in environmental pollution, as they are a source of the finest particulate matter. Emissions from non-exhaust processes include wear-products of brakes, tires, automotive hardware, road surface, and traffic signs, but still are paid little attention to. Automotive friction composites for brake pads are composite materials which may consist of potentially hazardous materials and there is a lack of information regarding the potential influence of the brake wear debris (BWD) on the environment, especially on human health. Thus, we focused our study on the genotoxicity of the airborne fraction of BWD using a brake pad model representing an average low-metallic formulation available in the EU market. BWD was generated in the laboratory by a full-scale brake dynamometer and characterized by Raman microspectroscopy, scanning electron microscopy, and transmission electron microscopy showing that it contains nano-sized crystalline metal-based particles. Genotoxicity tested in human lymphocytes in different testing conditions showed an increase in frequencies of micronucleated binucleated cells (MNBNCs) exposed for 48h to BWD nanoparticles (NPs) (with 10% of foetal calf serum in culture medium) compared with lymphocytes exposed to medium alone, statistically significant only at the concentration 3µg/cm(2) (p=0.032).
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.envres.2016.04.022 | DOI Listing |
J Hazard Mater
December 2024
Guangdong Basic Research Center of Excellence for Ecological Security and Green Development, Guangdong Provincial Key Laboratory of Water Quality Improvement and Ecological Restoration for Watersheds, School of Ecology, Environment and Resources, Guangdong University of Technology, Guangzhou 510006, China.
Receptor models have been widely used to identify pollution sources in the urban environment. However, evaluating the accuracy of source apportionment results for road deposited sediments (RDS) using these models has not been the focus of previous studies. This study compared canonical receptor models, i.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
December 2024
Instituto de Astronomia, Geofísica e Ciências Atmosféricas, Universidade de São Paulo, USP, São Paulo, Brazil.
Road traffic is one of the main sources of particulate matter in the urban environment, emitting particulate organic and elemental carbon compounds and metal-rich particles through combustion and brakes and tires wear. In Western Africa, the carbon and metal composition of airborne particles is also influenced by additional sources linked to biomass combustion and recent industrialization. Here, we investigated the impact of combustion-related and non-combustion-related emissions on the distribution of carbonaceous fractions and iron-rich particles in two urban environments in France and Senegal.
View Article and Find Full Text PDFMaterials (Basel)
November 2024
Faculty of Mechanical Engineering, Bialystok University of Technology, 45C Wiejska Str., 15-351 Bialystok, Poland.
An innovative prototype composition of a composite friction material was developed. The actual values of selected parameters were determined, as described in a previous paper. It was decided to verify whether the proposed material differs from conventional materials in terms of temperature characteristics, and if so, to what extent.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
December 2024
Xiamen Research Academy of Environmental Science, Xiamen, 361021, China.
Vehicle electrification is an important means of reducing urban air pollution. However, vehicle electrification does not necessarily reduce particulate matter (PM and PM) and heavy metals (HM) due to the increase in non-exhaust emissions. In this study, we established the emission inventories of PM, PM, and their associated heavy metals (PM-HM and PM-HM) from the on-road vehicles in the Xiamen-Zhangzhou-Quanzhou metropolitan area in southeastern China between 2015 and 2060.
View Article and Find Full Text PDFJ Hazard Mater
November 2024
University of the Bundeswehr Munich, Faculty for Mechanical Engineering, Institute of Chemistry and Environmental Engineering, Werner-Heisenberg-Weg 39, 85577 Neubiberg, Germany; Joint Mass Spectrometry Center at Comprehensive Molecular Analytics (CMA), Environmental Health Center, Helmholtz Munich, Ingolstädter Landstrasse 1, 85764 Neuherberg, Germany. Electronic address:
Non-exhaust emissions have gained increasing attention during the last years, with the upcoming EURO 7 regulation defining maximum PM emission factors for tire and brake emissions for the first time. This study, therefore, focusses on broadening the knowledge on chemical composition and physical characteristics of brake dust to define emission factors for heavy metal and organic pollutants. Particles from two pads were analyzed utilizing the Worldwide Harmonised Light Vehicle Test Procedure (WLTP) brake cycle.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!