The effect of fluid shear stress on the in vitro degradation of poly(lactide-co-glycolide) acid membranes.

Poly(lactide-co-glycolide) acid (PLGA) has been widely used as a biodegradable polymer material for coating stents or fabricating biodegradable stents. Its mechanism of degradation has been extensively investigated, especially with regard to how tensile and compressive loadings may affect the in vitro degradation of PLGA. Fluid shear stress is also one of the most important factors in the development of atherosclerosis and restenosis. But the effect of fluid shear stress on the degradation process is still unclear. The purpose of this study was to characterize the in vitro degradation of PLGA membranes that experienced different fluid shear stresses in 150 mL of deionized water at 37°C for 20 days. Particular emphasis was given to changes in the viscosity of the degradation solution, as well as the mechanical and morphological properties of the samples. The viscosity of the degradation solution with the mechanical loaded specimens was more severely affected than that of the control group. Increasing the fluid shear stress could accelerate the loss of the ultimate strength of PLGA membranes while it slowed down the change of the tensile elastic modulus in the early period. With regard to morphology, the surface roughness was more obviously reduced in the loaded groups. This indicated that the fluid shear stress could affect the in vitro degradation of PLGA membranes. Therefore, this study could help improve the design of PLGA membranes for biomedical applications. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2016.