Pharmaceutical formulations intended for treatment of xerostomia (dry mouth) should be able to keep the oral mucosa hydrated for a prolonged period of time. The products already existing on the market contain water-soluble polymers, however their ability to moisturize the oral mucosa for a longer period of time seems limited. In this paper the sorption properties of water vapor of high-methoxylated pectin (HM-pectin, a hydrophilic biopolymer) and phosphatidylcholine-based (Soya-PC) liposomes have been studied and compared using a gravimetric method. The kinetics of water desorption and sorption have been recorded over the relative humidity range RH=95-0-95%, at 35°C. The obtained isotherms were found to be well described by the n-layer Brunauer-Emmet-Teller (BET) adsorption model. The water isotherms on HM-pectin were Type II (IUPAC), while water isotherms on liposomes were Type III. The maximum water sorption capacity of liposomes (1.2mg water per mg of adsorbent at 95% RH) was found to be twice as high as for pectin. Due to the slower water release from the liposomes, as well as their high water sorption capacity, they seem to have great potential in relieving the symptoms of dry mouth syndrome.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ijpharm.2016.04.050 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Cellulose-Based Aerogels for Environmentally Sustainable Applications: A Review of the Production, Modification, and Sorption of Environmental Contaminants.
Polymers (Basel)
January 2025
Environmental Sciences Postgraduate Program, Center of Engineering, Federal University of Pelotas, R. Benjamin Constant 989, Pelotas 96010-020, RS, Brazil.
Environmental pollution, stemming from the disposal of contaminants, poses severe threats to ecosystems and human health. The emergence of a new class of pollutants, termed emerging contaminants (ECs), in soil, water, and air has raised global concerns, aligning with the UN 2030 Agenda's Sustainable Development Goals. Aerogels, three-dimensional structures with high porosity and low density, offer promise in addressing this issue.
View Article and Find Full Text PDFEfficacy of the Fumigant Ethanedinitrile to Control the Ham Mite, (Schrank) (Sarcoptiformes: Acaridae), and Its Sorption on Dry-Cured Ham.
Insects
December 2024
Department of Entomology, Kansas State University, 123 W. Waters Hall, Manhattan, KS 66506, USA.
Management of stored-product pests has historically relied on fumigation when pest populations become large. However, the ban of the fumigant methyl bromide and the ineffectiveness of other pesticides stress the need for alternative fumigants. Therefore, laboratory studies were conducted to evaluate the efficacy of ethanedinitrile (EDN) against different life stages of the mite and to determine the sorption and desorption of EDN by dry-cured ham meat.
View Article and Find Full Text PDFPreparation and characterization of SPE column with smart green molecularly imprinted polymers materials for selective determination of S-metolachlor herbicide.
Sci Rep
January 2025
Department of Process Engineering and Technology of Polymer and Carbon Materials, Wroclaw University of Science and Technology, Wybrzeże Wyspiańskiego 27, Wrocław, 50-370, Poland.
The presence of traces of herbicides in ground and surface waters can have adverse impacts on humans and the environment. Therefore, developing a highly selective and reusable adsorbent for monitoring water quality has become important. This article describes smart green molecularly imprinted polymers (MIPs) as selective sorbents of S-metolachlor herbicide for solid phase extraction (SPE).
View Article and Find Full Text PDFHigh-Performance TiCT-MXene/Mycelium Hybrid Membrane for Efficient Lead Remediation: Design and Mechanistic Insights.
ACS Appl Mater Interfaces
January 2025
Department of Materials Design and Innovation, University at Buffalo, Buffalo, New York 14260-1660, United States.
This study presents a hybrid microfiltration technology designed for high-performance lead (Pb(II)) remediation, especially from aqueous solutions with high Pb(II) concentrations, by utilizing two-dimensional (2D) TiCT-MXene layers deposited on dry mycelium membranes. The hybrid TiCT-MXene/mycelium (MyMX) membranes were fabricated via a single-step electrochemical deposition (ECD) technique, which enabled a uniform coating of 2D TiCT-MXene onto individual hyphal fibers of a prefabricated mycelium membrane. Optimized ECD parameters for high Pb(II) uptake were identified using scanning electron microscopy and energy-dispersive X-ray spectroscopy.
View Article and Find Full Text PDFAchieving up to 95% removal efficiency of chlorpyrifos pesticide using sugarcane bagasse-based biochar alginate beads in a continuous fixed-bed adsorption column.
Environ Res
January 2025
Department of Chemical Engineering, SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India - 603202.
Pesticide contamination in wastewater poses a significant environmental challenge, driven by extensive agricultural use. This study evaluates the removal of chlorpyrifos (CPS) using sugarcane bagasse-based biochar alginate beads in a continuous fixed-bed adsorption column, achieving a remarkable 95-98% removal efficiency. Compared to conventional adsorbents like activated carbon, which typically show CPS adsorption capacities ranging from 50-70 mg g⁻ under similar conditions, the biochar alginate beads demonstrate better performance with a sorption capacity of 91.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!