A simple separation of americium from curium would support closure of the nuclear fuel cycle, assist in nuclear forensic analysis, and allow for more accurate measurement of neutron capture properties of (241)Am. Methods for the separation of americium from curium are however complicated and time-consuming due to the similar chemical properties of these elements. In this work a novel method for the separation of americium from curium in nitric acid media was developed using sodium bismuthate to perform both the oxidation and separation. Sodium bismuthate is shown to be a promising material for performing a simple and rapid separation. Curium is more strongly retained than americium on the undissolved sodium bismuthate at nitric acid concentrations below 1.0 M. A separation factor of ∼90 was obtained in 0.1 M nitric acid. This separation factor is achieved within the first minute of contact and is maintained for at least 2 h of contact. Separations using sodium bismuthate were performed using solid-liquid extraction as well as column chromatography.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acs.analchem.6b01026 | DOI Listing |
J Fluoresc
January 2025
Department of Physics, Acharya Nagarjuna University, Nagarjuna Nagar, Andhra Pradesh, 522510, India.
In this work, the conventional melt quenching approach is used to synthesize the Pr doped NaF-BiO-BO-SiO (NBBS) glasses. The influence of Pr ions on their spectroscopic and structural characteristics in glass network is investigated. The amorphous nature of the samples has been amply verified by X-ray diffraction patterns.
View Article and Find Full Text PDFNat Commun
January 2025
State Key Lab of Metal Matrix Composites School of Materials Science and Engineering Shanghai Jiao Tong University 800 Dongchuan Road, Shanghai, P. R. China.
Reactive oxygen species with evoked immunotherapy holds tremendous promise for cancer treatment but has limitations due to its dependence on exogenous excitation and/or endogenous HO and O. Here we report a versatile oxidizing pentavalent bismuth(V) nanoplatform (NaBiO-PEG) can generate reactive oxygen species in an excitation-free and HO- and O-independent manner. Upon exposure to the tumor microenvironment, NaBiO-PEG undergoes continuous H-accelerated hydrolysis with •OH and O generation through electron transfer-mediated Bi-to-Bi conversion and lattice oxygen transformation.
View Article and Find Full Text PDFJ Am Chem Soc
January 2025
State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Materials, Xiamen University, Xiamen 361005, China.
Advancements in the development of fast-charging and long-lasting microstructured alloying anodes with high volumetric capacities are essential for enhancing the operational efficiency of sodium-ion batteries (SIBs). These anodes, however, face challenges such as declined cyclability and rate capability, primarily due to mechanical degradation reduced by significant volumetric changes (over 252%) and slow kinetics of sodium-ion storage. Herein, we introduce a novel anode design featuring densely packed bismuth (Bi) embedded within highly conductive carbon microspheres to overcome the aforementioned challenges.
View Article and Find Full Text PDFEnviron Res
January 2025
Jiangxi Province Key Laboratory of Surface Engineering, Jiangxi Science & Technology Normal University, Nanchang, 330013, PR China; School of Materials and Energy, Jiangxi Science & Technology Normal University, Nanchang, 330013, PR China. Electronic address:
One-dimensional (1D) hierarchical photocatalyst has the advantages of 1D materials and hierarchical materials, which is a kind of potential high performance photocatalytic materials. However, how to efficiently synthesize 1D hierarchical BiOBr is still a huge challenge. Herein, 1D rod-like BiO(OH)(NO)·3HO, the hydrolysis product of Bi(NO)·5HO, was acted as both the template and Bi source to synthesize 1D hierarchical hollow BiOBr (1DHHBr) through a facile solution stirring method at room temperature, using KBr as Br source.
View Article and Find Full Text PDFRSC Adv
December 2024
Shanxi Key Laboratory of High-end Equipment Reliability Technology, School of Mechanical and Electrical Engineering, North University of China Taiyuan 030051 China
Metallic bismuth is a promising anode electrode material for sodium ion batteries due to its high theoretical specific capacity. However, the formation of NaBi during the reaction process brings about significant volume changes and structural collapse of the electrode, resulting in the destruction of structures and a decrease in the cycling stability of sodium ion batteries. In this study, bismuth nanoparticles embedded in carbon fibers (Bi/CF) through a facile approach of electrospinning and calcination.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!