Objectives: The aim of the present study was to evaluate the bonding effectiveness of two resin core buildup systems using conventional methods in the field of adhesive dentistry and a new non-destructive method.

Materials And Methods: Twenty-four single-rooted human teeth were built up with dual-cure one-step self-etch adhesive and composite systems (SY1: Clearfil DC bond and Clearfil DC core automix, SY2: Clearfil bond SE one and Clearfil DC core automix one). The prepared samples were sectioned into approximately 1 × 1-mm-thick beams and subjected to micro-tensile bond strength (μTBS) testing (n = 24). The fractured beams after μTBS testing were analyzed by SEM and energy-dispersive X-ray (EDX) spectrometry. The three teeth filled with each resin core system were sectioned and embedded in epoxy resin to observe the dentin-bonding interface under TEM (n = 6). Moreover, three of each resin core-filled teeth without any processing were examined using μCT (n = 6).

Results: Two-way ANOVA revealed that the two factors "root region" (p < 0.001, F = 15.22) and "system" (SY1 < SY2; p < 0.001, F = 22.52) had a significant influence. The μTBS gradually decreased from the coronal side to the apical side of the root canal. Morphological evaluation revealed that SY2 was superior in terms of resin curing at the apical side. μCT non-destructive evaluation clearly revealed gap formation in SY1.

Conclusion: SY2, which included a new light-independent catalyst, showed better bonding effectiveness and adhesive interface to dentin compared to that of SY1.

Clinical Relevance: The new catalyst, which is activated by contact with adhesive and resin composite, can be used for resin core buildup restorations.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s00784-016-1792-5DOI Listing

Publication Analysis

Top Keywords

resin core
12
bonding effectiveness
8
clearfil bond
8
bond clearfil
8
clearfil core
8
core automix
8
μtbs testing
8
resin
5
core
5
effectiveness multi-interfacial
4

Similar Publications

Ribosomes, discovered in 1955 by George Palade, were initially described as small cytoplasmic particles preferentially associated with the endoplasmic reticulum (ER). Over the years, extensive research has focused on both the structure and function of ribosomes. However, a fundamental question - how many ribosomes are present within whole cells - has remained largely unaddressed.

View Article and Find Full Text PDF

Purpose: To investigate how varying ferrule heights and the number of glass fiber posts affect fracture resistance and behavior of endodontically treated maxillary first premolars with substantial loss of tooth structure.

Materials And Methods: Twenty-four extracted endodontically treated human maxillary first premolars were divided into three groups (n = 8) based on ferrule height and post number. The groups were as follows: premolars of 2 mm ferrule height that were restored with single posts (control group), premolars of 0.

View Article and Find Full Text PDF

This study aimed to evaluate the effects of fiberglass posts on fracture behavior in endodontically treated teeth (ETT) restored with composite veneers. Adult patients who had endodontically treated anterior teeth restored with composite veneers, with or without fiberglass posts, were divided into the case (with fractured teeth) and control (without fractured teeth) groups. All fracture patterns were sorted by a 6-point scoring system: 0, no fracture; 1, veneer buccal fracture; 2, incisal edge fracture; 3, coronal middle-third fracture; 4, coronal cervical fracture; 5, coronal and root fracture; and 6, root fracture.

View Article and Find Full Text PDF

In recent years, the construction industry has faced challenges related to rising material costs, labor shortages and environmental sustainability, resulting in an increased interest in modular construction cores composed of recycled materials, such as XPS, PUR, PLW and GFRP, from waste from the truck body industry. Two resins, PUR and polyester, were used to bond these recycled composites. Physical, chemical and mechanical analyses showed that the panels formed with PUR resin had superior workability due to the higher open time of the resin, 11.

View Article and Find Full Text PDF

Investigation of Damping Properties of Natural Fiber-Reinforced Composites at Various Impact Energy Levels.

Polymers (Basel)

December 2024

Department of Automotive Engineering, Faculty of Technology, Afyon Kocatepe University, Afyonkarahisar 03200, Turkey.

Natural fiber-reinforced composites are composite materials composed of natural fibers, such as plant fibers and synthetic biopolymers. These environmentally friendly composites are biodegradable, renewable, cheap, lightweight, and low-density, attracting attention as eco-friendly alternatives to synthetic fiber-reinforced composites. In this study, natural fiber-reinforced polymer foam core layered composites were produced for the automotive industry.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!