A novel and simple technique based on the light diffraction effect for visualization of low-frequency underwater acoustic waves (LFUAWs) in real time has been developed in this paper. A cylindrical object has been put on the surface of the water. A low-frequency underwater longitudinal wave can be generated into a water surface transversal capillary wave around the cylinder by our technique. Modulating the phase of a laser beam reflected from a water surface by surface acoustic waves (SAWs) realizes the acousto-optic effect. Then, a steady and visible diffraction pattern is experimentally observed. A physical model of the SAW is established to verify the feasibility of our technique. An analytical expression of wavelength, wave amplitude, and excitation frequency has been derived to study the physical properties of LFUAWs, and it explains the experimental phenomenon very well. As a result, the technique is effective, easy, and practical for visualizing LFUAWs and has significance for applications.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/AO.55.002018 | DOI Listing |
JASA Express Lett
January 2025
Scripps Institution of Oceanography, University of California San Diego, La Jolla, California 92093,
This work demonstrates the feasibility of performing through-the-sensor (TTS) sub-bottom imaging using low-frequency ([100 Hz-1kHz]) self-noise generated by the propulsion of an autonomous underwater vehicle (AUV) acting as a source of opportunity. The self-noise was recorded by a short towed horizontal line array (11.4 m aperture) by the same AUV while it operated ∼35 m above the seabed along a range-dependent section at the New England shelf break.
View Article and Find Full Text PDFJ Acoust Soc Am
January 2025
National Key Laboratory of Underwater Acoustic Technology, Harbin Engineering University, Harbin 150001, China.
Low-frequency transducers are considerably smaller than the wavelength. When multiple low-frequency transducers are closely packed, they couple with the surrounding water and form a transducer-water-transducer coupling structure called multi-element coupled transducers (MCT). This study presents a theoretical model of the MCT based on radiation and mutual radiation theory and analyzes it under multiple resonance frequencies and vibration modes.
View Article and Find Full Text PDFPeerJ
January 2025
Institute of Science and Environment, University of Saint Joseph, Macao, Macao S.A.R., China.
While soundscapes shape the structure and function of auditory systems over evolutionary timescales, there is limited information regarding the adaptation of wild fish populations to their natural acoustic environments. This is particularly relevant for freshwater ecosystems, which are extremely diverse and face escalating pressures from human activities and associated noise pollution. The Siamese fighting fish is one of the most important cultured species in the global ornamental fish market and is increasingly recognized as a model organism for genetics and behavioural studies.
View Article and Find Full Text PDFJ Acoust Soc Am
January 2025
National Key Laboratory of Underwater Acoustic Technology, Harbin Engineering University, Harbin 150001, China.
The flextensional transducer (FT) is a typical low-frequency transmitting transducer that is capable of high-power operation due to its capacity for displacement amplification. This article uses the structural configuration of the class IV FT as the basis for designing a ring transducer, which is a circular structure comprising a multitude of class IV flextensional structures as well as circular acoustic radiation structures. The flextensional structure drives the circular acoustic radiation structure, which in turn generates sound waves at low frequencies.
View Article and Find Full Text PDFJ Acoust Soc Am
January 2025
National Key Laboratory of Underwater Acoustic Technology, Harbin Engineering University, Harbin 150001, China.
With the vigorous development of maritime trade, the frequency band from 100 to 1500 Hz of shallow-sea ambient noise is not only affected by surface wind-induced noise but also the contribution of ship noise. Shallow-sea ambient noise can be described by a linear combination of surface wind-induced noise sources and ship noise sources. By using the correspondence between the real part of the vertical coherence and vertical energy flux, this work establishes a combined noise source model based on vertical coherence.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!