Biological groundwater treatment for chromium removal at low hexavalent chromium concentrations.

Chemosphere

Sanitary Engineering Laboratory, Department of Water Resources and Environmental Engineering, School of Civil Engineering, National Technical University of Athens, Iroon Polytechniou 5, Zografou 157 80, Athens, Greece.

Published: June 2016

The objective of this work is to develop and evaluate biological groundwater treatment systems that will achieve hexavalent chromium reduction and total chromium removal from groundwater at hexavalent chromium (Cr(VI)) groundwater concentrations in the 0-200 μg/L range. Three lab-scale units operated, as sequencing batch reactors (SBR) under aerobic, anaerobic and anaerobic-aerobic conditions. All systems received groundwater with a Cr(VI) content of 200 μg/L. In order to support biological growth, groundwater was supplemented with milk, liquid cheese whey or a mixture of sugar and milk to achieve a COD concentration of 200 mg/L. The results demonstrate that a fully anaerobic system or an anaerobic-aerobic system dosed with simple or complex external organic carbon sources can lead to practically complete Cr(VI) reduction to Cr(III). The temperature dependency of maximum Cr(VI) removal rates can be described by the Arrhenius relationship. Total chromium removal in the biological treatment systems was not complete because a significant portion of Cr(III) remained in solution. An integrated system comprising of an anaerobic SBR followed by a sand filter achieved more than 95% total chromium removal thus resulting in average effluent total and dissolved chromium concentrations of 7 μg/L and 3 μg/L, respectively.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chemosphere.2016.02.124DOI Listing

Publication Analysis

Top Keywords

chromium removal
16
hexavalent chromium
12
total chromium
12
biological groundwater
8
groundwater treatment
8
chromium
8
chromium concentrations
8
treatment systems
8
removal
5
groundwater
5

Similar Publications

Adsorption of Cr(VI) Using Organoclay/Alginate Hydrogel Beads and Their Application to Tannery Effluent.

Gels

November 2024

Departamento de Ingeniería Química, Universidad Nacional de Colombia Sede Manizales, Campus La Nubia, km 9 vía al Aeropuerto, Manizales 170003, Colombia.

The tanning industry is among the most environmentally harmful activities globally due to the pollution of lakes and rivers from its effluents. Hexavalent chromium, a metal in tannery effluents, has adverse effects on human health and ecosystems, requiring the development of removal techniques. This study assessed the efficacy of organobentonite/alginate hydrogel beads in removing Cr(VI) from a fixed-bed adsorption column system.

View Article and Find Full Text PDF

Magnetic activated carbon has been proved its separation ability to overcome a main drawback of activated carbon powder. However, effect of magnetization method on characterizations and Chromium (VI) adsorption of this adsorbent from Artocarpus Heterophyllus Peel (jackfruit peel) has not been investigated yet. This study magnetized jackfruit peel activated carbon using thermochemical and co-precipitation methods.

View Article and Find Full Text PDF

In this study, kapok fiber (KF) a hollow and hydrophobic fiber, was modified with cetyltrimethylammonium bromide (CTAB) or cetylpyridinium chloride (CPC), rendering adsorbed amount of ∼0.75 × 10 mol/g. Small-angle X-ray scattering (SAXS) measurements of dry KF/CTAB and KF/CPC evidenced a periodic distance of ∼2.

View Article and Find Full Text PDF

This study compares the material characteristics and evaluates the Cr(VI) adsorption capacity of biochar derived from a novel byproduct (young durian fruit, YDF), synthesized using two pyrolysis methods (traditional and microwave-assisted). The optimal pyrolysis conditions for porosity were 800 °C and 800 W for 30 min, respectively. The traditional pyrolysis method yielded a very high surface area and pore volume (668 m/g; 0.

View Article and Find Full Text PDF

The spread and mobilization of toxic heavy metals in the environment have increased to a harmful level in recent years as a result of the fast industrialization occurring all over the world to meet the demands of a rising population. This research aims to analyze and evaluate the mycoremediation abilities of fungal strains that exhibit tolerance to heavy metals, gathered from water samples at Buckingham Canal, Neelankarai, Chennai. Water samples were examined for heavy metal analysis, and the highest toxic heavy metals, Zn, Pb, Mn, Cu, and Cr, were recorded.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!