In this study, a hydrophobic synthetic zeolite, namely ZSM-5 is chosen as an adsorbent/catalyst for toluene removal. Experimental results showed that toluene adsorption onto ZSM-5 was favourable, following a Langmuir adsorption isotherm model. ZSM-5 zeolite was regenerated using gaseous ozone at low temperature. Adsorbed toluene was oxidised, releasing mainly CO2 and H2O. Traces of oxidation by-products such as acetic acid and acetaldehyde were formed and remained adsorbed after the oxidativate regeneration with ozone. After four successive cycles of adsorption/ozonation, the adsorption efficiency was not affected (92%-99%). These results showed that volatile organic compound (VOC) removal by adsorption onto ZSM-5 zeolite followed by ozone regeneration could be used as a promising hybrid process for the control of VOC emissions in terms of efficiency.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jes.2015.05.021 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
ZSM-5 Zeolite Synthesis from Coal Fly Ash Synthesised Silica: Sole Silica & Alumina Source.
ChemistryOpen
January 2025
Department of Chemistry, University of Botswana, Botswana Private bag UB, Gaborone, 00704, Botswana.
This study explores the synthesis of ZSM-5 zeolite using high-purity mesoporous silica exclusively derived from coal fly ash (CFA), eliminating the need for additional silica or alumina sources. Traditional ZSM-5 synthesis relies on costly and environmentally harmful pure chemicals, whereas this approach utilizes CFA, an industrial byproduct, addressing both cost and sustainability concerns. The synthesized ZSM-5 zeolite demonstrates exceptional purity, with a surface area of 455.
View Article and Find Full Text PDFManipulating the interfacial integration mode of a bio-templated porous ZSM-5 platform with an Au/CuZnO catalyst for enhanced efficiency and recycling stability in glycerol conversion to 1,3-dihydroxyacetone.
Nanoscale
January 2025
School of Chemistry and Chemical Engineering, North Minzu University, Yinchuan 750021, PR China.
Despite the potential to significantly enhance the economic viability of biomass-based platforms through the selective conversion of glycerol to 1,3-dihydroxyacetone (DHA), a formidable challenge persists in simultaneously achieving high catalytic activity and stability along this reaction pathway. Herein, we have devised a strategic approach to manipulate the interfacial integration within composite catalysts to address the performance trade-off. Through the modulation of the composite process involving a bio-templated porous ZSM-5 zeolite platform (bZ) and an Au/CuZnO catalyst, three distinct interfacial bonding modes were achieved: physical milling, encapsulation by zeolite, and growth on zeolite.
View Article and Find Full Text PDFLow Molecular Weight Biobased Aromatics from Pyrolysis Liquids Using Zeolites: Yield Improvements by Using Pyrolysis Oil Fractions.
ACS Omega
January 2025
Green Chemical Reaction Engineering, Engineering and Technology Institute Groningen, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands.
Pyrolysis liquids from lignocellulosic biomass have the potential to be used as a feed for aromatics such as benzene, toluene, and xylenes (BTX) using catalytic upgrading with zeolites. We here report an experimental study on the conversion of various pyrolysis oil fractions to determine the most suitable one for BTX synthesis. For this purpose, the pyrolysis liquid was fractionated using several extraction/distillation steps to give four fractions with different chemical compositions.
View Article and Find Full Text PDFFabricating a stable interface of tetracoordinated-phosphorus and framework Al within P-doping ZSM-5 zeolite for catalytic methanol-to-propylene reaction.
J Colloid Interface Sci
January 2025
Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming 650500, PR China; Yunnan Provincial Key Laboratory of Energy Saving in Phosphorus Chemical Engineering and New Phosphorus Materials, Kunming 650500, PR China. Electronic address:
Phosphorus (P)-doping H-ZSM-5 zeolites, which is crucial for industrial applications, aim to adjust both acidity and framework stability while optimizing product distribution in heterogeneous catalysis. Nonetheless, current phosphating methods often suffer from inadequate phosphorus dispersion and unclear interfacial interactions with framework aluminum (Al). In this work, P-doping ZSM-5 zeolites were successfully one-step prepared by using tributylphosphine served as an organophosphorus precursor, assisting by density functional theory calculations.
View Article and Find Full Text PDFAtomic locations and adsorbate interactions of Al single and pair sites in H-ZSM-5 zeolite.
Science
January 2025
Wolfson Catalysis Centre, Department of Chemistry, University of Oxford, Oxford, UK.
The distribution of substitutional aluminum (Al) atoms in zeolites affects molecular adsorbate geometry, catalytic activity, and shape and size selectivity. Accurately determining Al positions has been challenging. We used synchrotron resonant soft x-ray diffraction (RSXRD) at multiple energies near the Al K-edge combined with molecular adsorption techniques to precisely locate "single Al" and "Al pairs" in a commercial H-ZSM-5 zeolite.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!