Effects of Peracetic Acid on the Corrosion Resistance of Commercially Pure Titanium (grade 4).

Braz Dent J

Department of Dental Materials and Prosthodontics, School of Dentistry of Ribeirão Preto, USP - Universidade de São Paulo, Ribeirão Preto, SP, Brazil.

Published: February 2017

The aim of this study was to evaluate the corrosion resistance of pure titanium grade 4 (cp-Ti-4), subjected to disinfection with 0.2% and 2% peracetic acid during different immersion periods using anodic potentiodynamic polarization test in acid and neutral artificial saliva. Cylindrical samples of cp-Ti-4 (5 mm x 5 mm) were used to fabricate 24 working electrodes, which were mechanically polished and divided into eight groups (n=3) for disinfection in 2% and 0.2% peracetic acid for 30 and 120 min. After disinfection, anodic polarization was performed in artificial saliva with pH 4.8 and 6.8 to assess the electrochemical behavior of the electrodes. A conventional electrochemical cell, constituting a reference electrode, a platinum counter electrode, and the working electrode (cp-Ti specimens) were used with a scanning rate of 1 mV/s. Three curves were obtained for each working electrode, and corrosion was characterized by using scanning electron microscopy (SEM) and energy dispersive x-ray spectrometry (EDS). Data of corrosion potential (Ecorr) and passive current (Ipass) obtained by the polarization curves were analyzed statistically by Student's t-test (a=0.05). The statistical analysis showed no significant differences (p>0.05) between artificial saliva types at different concentrations and periods of disinfection, as well as between control and experimental groups. No surface changes were observed in all groups evaluated. In conclusion, disinfection with 0.2% and 2% peracetic acid concentrations did not cause corrosion in samples manufactured with cp-Ti-4.

Download full-text PDF

Source
http://dx.doi.org/10.1590/0103-6440201300511DOI Listing

Publication Analysis

Top Keywords

peracetic acid
16
disinfection 02%
12
02% peracetic
12
artificial saliva
12
corrosion resistance
8
pure titanium
8
titanium grade
8
working electrode
8
acid
5
corrosion
5

Similar Publications

Due to an increased demand for natural food additives, clove oil was assessed as a natural alternative to chemical disinfectants in produce washing. This study assessed the antimicrobial activity of 5 and 10% (/) clove oil-amended wash liquid (CO) using a zone of inhibition (ZIB) test and determined the time required to completely inactivate pathogenic bacteria using bacterial death curve analysis. A washing experiment was used to evaluate CO's ability to inhibit bacterial growth on inoculated RTE spinach and in the wash water.

View Article and Find Full Text PDF

In a culture survey of 30 U.S. hospitals, rates of Clostridioides difficile spore contamination after cleaning and disinfection of non-C.

View Article and Find Full Text PDF

Uses of Chemical Technologies for Meat Decontamination.

Food Sci Anim Resour

January 2025

Department of Animal Science, Kyungpook National University, Sangju 37224, Korea.

Traditional meat preservation techniques such as smoking, drying, and salting have various shortcomings and limitations in effectively reducing microbial loads and maintaining meat quality. Consequently, chemical compounds have gained attention as promising alternatives for decontamination, offering the potential to extend shelf life and minimize physical, chemical, and sensory changes in meat. Chlorine-based compounds, trisodium phosphate, organic acids, bacteriocins, lactoferrin, and peracetic acid are technologies of recent industrial applications that inhibit spoilage and pathogenic microorganisms in meat.

View Article and Find Full Text PDF

We evaluated the antimicrobial performance of sodium hypochlorite (NaOCl) and peracetic acid (PAA) during washing of baby spinach in water of varying levels of organic load, as measured by its chemical oxygen demand (COD). Escherichia coli TVS353 was spot inoculated onto one unwashed leaf. Sanitizers were added into water with preadjusted COD (300 or 2500 ppm) to achieve concentrations from 20 to 80 ppm.

View Article and Find Full Text PDF

Involvement of inorganic nitrogen species (NO (x = 2, 3)) in the degradation of organic contaminants in environmental waters via UV irradiation or chemical oxidation: A dual-edged approach.

Sci Total Environ

February 2025

Key Laboratory for City Cluster Environmental Safety and Green Development of the Ministry of Education, Institute of Environmental and Ecological Engineering, Guangdong University of Technology, Guangzhou, 510006, China; Guangdong Basic Research Center of Excellence for Ecological Security and Green Development, Guangzhou, 510000, China.

OH-mediated advanced oxidation processes (AOPs) are widely used in wastewater treatment and drinking water purification. Recently, an increasing number of studies have indicated that common inorganic nitrogen ions can efficiently generate •OH under UV irradiation, demonstrating strong performance in the degradation of various contaminants. Conversely, the presence of inorganic nitrogen ions in UV or other oxidation processes dramatically increases the yield of toxic nitro (so)-aromatic products and the formation potential of nitrogenous disinfection by-products with high genotoxicity and cytotoxicity.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!