High voltage holding of the large surface-plasma negative ion source with cesium deposition was studied. It was found that heating of ion-optical system electrodes to temperature >100 °C facilitates the source conditioning by high voltage pulses in vacuum and by beam shots. The procedure of electrode conditioning and the data on high-voltage holding in the negative ion source with small cesium seed are described. The mechanism of high voltage holding improvement by depletion of cesium coverage is discussed.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1063/1.4934205 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Laser surface nanoalloying of Fe, Si, and C on aluminum substrates with excellent optical and electronic properties.
Nanoscale Adv
January 2025
Energy Masteries Laboratory, Physics Department, School of Sciences and Engineering, The American University in Cairo New Cairo 11835 Egypt
Laser surface alloying of Fe, Si, and C on aluminium is demonstrated using a Q-switched Nd:YAG laser as the source of energy. The fundamental wavelength of the laser beam was 1064 nm with an output energy of 100 mJ and a pulse duration of 10 ns. The exposure was conducted in repetitive mode with a frequency rate of 1 Hz.
View Article and Find Full Text PDFIdentifying the Activated Carbon Electrode Aging Pathways in Lithium-Ion Hybrid Capacitors.
ACS Appl Energy Mater
January 2025
Institute of Chemistry and Technical Electrochemistry, Poznan University of Technology, Berdychowo 4, 60-965 Poznan, Poland.
This paper reports on several mechanisms of carbon aging in a hybrid lithium-ion capacitor operating with 1 mol L LiPF in an ethylene carbonate/dimethyl carbonate 1:1 vol/vol electrolyte. Carbon electrodes were subjected to a constant polarization protocol (i.e.
View Article and Find Full Text PDFPeriodic law-guided design of highly stable O3-type layered oxide cathodes for practical sodium-ion batteries.
Chem Sci
January 2025
College of Chemistry and Materials Engineering, Wenzhou University Wenzhou 325035 P. R. China
O3-type NaNiMnO cathode material exhibits significant potential for sodium-ion batteries (SIBs) owing to its high theoretical capacity and ample sodium reservoir. Nonetheless, its practical implementation encounters considerable obstacles, such as impaired structural integrity, sensitivity to moisture, inadequate high-temperature stability, and being unstable under high-voltage conditions. This study investigates the co-substitution of Cu, Mg, and Ti, guided by principles of the periodic law, to enhance the material's stability under varying conditions.
View Article and Find Full Text PDFThermal Gradient-Driven Heterogeneous Actuation of Liquid Crystal Elastomers for a Crawling Robot.
ACS Appl Mater Interfaces
January 2025
Department of Materials Science and Engineering, University of Connecticut, Storrs, Connecticut 06269, United States.
Emerging soft robots based on liquid crystal elastomers (LCEs) exhibit remarkable capabilities for large reversible shape morphing, enabling them to adapt to complex environments and perform diverse tasks such as locomotion and camouflage. Despite extensive studies, current methods for locally controlled actuation of LCE-based soft robots often involve intricate structural design, complex programming of LCEs, incorporation of multiple materials, or complex actuation methods. Here, we present a simple and efficient approach to achieve multiple deformation modes within a simply programmed LCE structure by harnessing Joule heating-induced thermal gradients across the LCE volume.
View Article and Find Full Text PDFMethylammonium-free, high-efficiency, and stable all-perovskite tandem solar cells enabled by multifunctional rubidium acetate.
Nat Commun
January 2025
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, PR China.
All-perovskite tandem solar cells (APTSCs) offer the potential to surpass the Shockley-Queisser limit of single-junction solar cells at low cost. However, high-performance APTSCs contain unstable methylammonium (MA) cation in the tin-lead (Sn-Pb) narrow bandgap subcells. Currently, MA-free Sn-Pb perovskite solar cells (PSCs) show lower performance compared with their MA-containing counterparts.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!