Aims And Objectives: The aim of this study was to asses & compare the load transfer characteristics of Ball/O-ring and Bar/Clip attachment systems in implant supported overdentures using analog and finite element analysis models.
Methodology: For the analog part of the study, castable bar was used for the bar and clip attachment and a metallic housing with a rubber O-ring component was used for the ball/O-ring attachment. The stress on the implant surface was measured using the strain-gauge technique. For the finite element analysis, the model were fabricated and load applications were done in a similar manner as in analog study.
Results: The difference between both the attachment systems was found to be statistically significant (P<0.001).
Conclusion: Ball/O-ring attachment system transmitted lesser amount of stresses to the implants on the non-loading side, as compared to the Bar-Clip attachment system. When overall stress distribution is compared, the Bar-Clip attachment seems to perform better than the Ball/O-ring attachment, because the force was distributed better.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4762336 | PMC |
| http://dx.doi.org/10.4103/0972-4052.165324 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Application of additive manufacturing TaBw01 porous tantalum rod in ARCO stage II osteonecrosis of the femoral head.
J Orthop Surg Res
December 2024
Center for Joint Surgery, Southwest Hospital, Army Medical University, Gaotanyan Street, Shapingba District, Chongqing, 400038, China.
Purpose: This study aims to investigate the suitable surgical strategies for applying TaBw01 porous tantalum rod across different stages of osteonecrosis of the femoral head (ONFH).
Methods: TaBw01 tantalum rods were fabricated using type FTaY-1 tantalum powder via the foam impregnation-sintering method. Mechanical testing with the Instron 8801 universal testing machine and finite element analysis (FEA) assessed single tantalum rod implantation and impaction bone grafting combined with rod implantation.
Don't mind the gap: reframing the Perren strain rule for fracture healing using insights from virtual mechanical testing.
Bone Joint Res
January 2025
Department of Mechanical Engineering & Mechanics, Lehigh University, Bethlehem, Pennsylvania, USA.
Aims: The "2 to 10% strain rule" for fracture healing has been widely interpreted to mean that interfragmentary strain greater than 10% predisposes a fracture to nonunion. This interpretation focuses on the gap-closing strain (axial micromotion divided by gap size), ignoring the region around the gap where osteogenesis typically initiates. The aim of this study was to measure gap-closing and 3D interfragmentary strains in plated ovine osteotomies and associate local strain conditions with callus mineralization.
View Article and Find Full Text PDFStudy on the determination method of excitation load in electrical signal simulation for piezoelectric ultrasonic internal inspection of pipelines.
Sci Rep
December 2024
School of Petroleum and Natural Gas Engineering, Southwest Petroleum University, Chengdu, 610500, China.
Accurately determining the initial acoustic field excitation load of a piezoelectric ultrasonic probe is essential for simulating electrical signals and calculating wall thickness during ultrasonic internal inspection of pipelines. A new method for determining the initial excitation load of the acoustic field is proposed, incorporating the focusing effect of the curved surface of pipelines on the ultrasonic signal from the piezoelectric ultrasonic probe. Finite element models were established for the new and old methods using COMSOL software, facilitating the analysis of the initial acoustic field distribution and associated electrical signal characteristics.
View Article and Find Full Text PDFA fast-modeling framework for personalized human body models based on a single image.
Med Biol Eng Comput
December 2024
School of Mechanical and Vehicle Engineering, Hunan University, Changsha, 410082, People's Republic of China.
Finite element human body models (HBMs) are the primary method for predicting human biological responses in vehicle collisions, especially personalized HBMs that allow accounting for diverse populations. Yet, creating personalized HBMs from a single image is a challenging task. This study addresses this challenge by providing a framework for HBM personalization, starting from a single image used to estimate the subject's skin point cloud, the skeletal point cloud, and the relative positions of the skeletons.
View Article and Find Full Text PDFCuring simulation and data-driven curing curve prediction of thermoset composites.
Sci Rep
December 2024
School of Physics, Nanjing University of Science and Technology, Nanjing, 210094, China.
Molding has been widely used to manufacture thermoset composite structures in the aerospace and automotive industries owing to its efficiency in reducing the number of parts and the manufacturing cost. For such molded composite parts, the degree-of-cure curve is generally used to evaluate the solidification of the resin. Nevertheless, in simulation of cure is not the cure model itself, but rather knowing the initial conditions such as fiber volume fraction, initial curing degree, convective boundary conditions etc.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!