Inspired by the composition of adhesive and reductive proteins secreted by marine mussels, polydopamine (PDA) was used to coat cotton microfiber (CMF), and then acted as reducing agent for the growth of Pd nanoparticles on PDA coated CMF (PDA@CMF) composites. The resultant CMF@PDA/Pd composites were then packed in a column for the further use in fixed-bed system. For the catalysis of the reduction of 4-nitrophenol, the flow rate of the 4-aminophenol solution (0.5 mM) was as high as 60 mL/min. The obtained fixed-bed system even exhibited superior performance to conventional batch reaction process because it greatly facilitated the efficiency of the catalytic fibers. Consequently, its turnover frequency (TOF) was up to 1.587 min(-1), while the TOF in the conventional batch reaction was 0.643 min(-1). The catalytic fibers also showed good recyclability, which can be recycled for nine successive cycles without a loss of activity. Furthermore, the catalytic system based on CMF@PDA/Pd can also be applied for Suzuki coupling reaction with the iodobenzene conversion up to 96.7%. The strategy to prepare CMF@PDA/Pd catalytic fixed bed was simple, economical and scalable, which can also be applied for coating different microfibers and loading other noble metal nanoparticles, was amenable for automated industrial processes.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4763215PMC
http://dx.doi.org/10.1038/srep21904DOI Listing

Publication Analysis

Top Keywords

fixed-bed system
12
conventional batch
8
batch reaction
8
catalytic fibers
8
mussel-inspired functionalization
4
functionalization cotton
4
cotton nano-catalyst
4
nano-catalyst support
4
support application
4
application fixed-bed
4

Similar Publications

Evaluation of Performance and Stability of a Gel-Type Polymer Sorbent for Recovery of Phosphate from Waste Streams.

ACS Appl Polym Mater

December 2024

School of Chemistry and Chemical Engineering, Queen's University, David Keir Building, Stranmillis Road, BT9 5AG Belfast, Northern Ireland, U.K.

Phosphorus (P) fertilizer is an essential component of our food system with the majority of all mined P rock processed to make mineral fertilizers. Globally however P rock stocks are declining-both in quality and quantity-with poor P management creating a linear economic system where P is mined, globally redistributed into products and eventually discharged into the environment leading to eutrophication. To enable establishment of a circular P economy, whereby P can be recovered from waste for its industrial reuse, requires the development of effective P recovery technologies.

View Article and Find Full Text PDF

Thermal processes are emerging as promising solutions to recovering phosphorus and other nutrient elements from anaerobic digestates. The feasibility of nutrient element recovery depends largely on the fates of nutrient elements and heavy metals during thermal processing. This study assesses the partitioning of macronutrients (N, P, K, Na, Ca and Mg) and heavy metals (Zn, Cu, and Mn) between condensed and gaseous phases during thermal conversion of cattle slurry digestates in gas atmospheres of pyrolysis, combustion, and gasification processes.

View Article and Find Full Text PDF

Adsorption of Cr(VI) Using Organoclay/Alginate Hydrogel Beads and Their Application to Tannery Effluent.

Gels

November 2024

Departamento de Ingeniería Química, Universidad Nacional de Colombia Sede Manizales, Campus La Nubia, km 9 vía al Aeropuerto, Manizales 170003, Colombia.

The tanning industry is among the most environmentally harmful activities globally due to the pollution of lakes and rivers from its effluents. Hexavalent chromium, a metal in tannery effluents, has adverse effects on human health and ecosystems, requiring the development of removal techniques. This study assessed the efficacy of organobentonite/alginate hydrogel beads in removing Cr(VI) from a fixed-bed adsorption column system.

View Article and Find Full Text PDF

Controllable Active Intermediate in CO Hydrogenation Enabling Highly Selective ,-Dimethylformamide Synthesis via -Formylation.

J Am Chem Soc

December 2024

Key Laboratory of Advanced Catalysis, Gansu Province, State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Lanzhou University, Lanzhou, Gansu 730000, China.

,-Dimethylformamide (DMF) is a widely used solvent, and its green and low-carbon synthesis methods are in high demand. Herein, we report a new approach for DMF synthesis using a continuous flow reaction system with a fixed-bed reactor and a ZnO-TiO solid solution catalyst. This catalyst effectively utilizes CO, H, and dimethylamine (DMA) as feedstocks, demonstrating performance with 99% DMF selectivity and single-pass DMA conversion approaching thermodynamic equilibrium.

View Article and Find Full Text PDF

Synergistic removal of Hg, HCl, and SO from flue gas in municipal solid waste incineration by mechanically modified fly ash.

J Environ Manage

December 2024

Key Laboratory of Power Station Energy Transfer Conversion and System, Ministry of Education, North China Electric Power University, Beijing, 102206, China.

The emissions of flue gas components (such as Hg, SO, HCl) and the generation of hazardous waste fly ash from municipal waste incineration pose a significant threat to environmental integrity. In this study, a mechanochemical method combined with a modifier is innovatively proposed for the modification of fly ash to remove Hg. In the fixed bed adsorption experiment, the removal efficiency of up to 60 percent can be achieved by ball milling (700rap,30min) alone.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!