Environmentally detrimental input (water turbidity) and conventional production inputs were considered within the framework of stochastic frontier analysis to estimate technical and environmental efficiencies of fishermen in sand dredging and non-dredging areas. Environmental efficiency was low among fishermen in the sand dredging areas. Educational status and experience in fishing and sand dredging were the factors influencing environmental efficiency in the sand dredging areas. Average quantity of fish caught per labour- hour was higher among fishermen in the non-dredging areas. Fishermen in the fishing community around the dredging areas travelled long distance in order to reduce the negative effect of sand dredging on their fishing activity. The study affirmed large household size among fishermen. The need to regulate the activities of sand dredgers by restricting license for sand dredging to non-fishing communities as well as intensifying family planning campaign in fishing communities to reduce the negative effect of high household size on fishing is imperative for the sustainability of artisanal fishing.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s10661-016-5137-2 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Can microplastic pollution be affected by beach nourishment? Assessment in intertidal sediment and bivalves.
Sci Total Environ
January 2025
Laboratory of Coastal Biology and Microplastic Analysis, Department of Chemistry, Federal University of Espírito Santo, Brazil.
Several methods can be used to mitigate coastal erosion, and one of the leading solutions is known as beach nourishment (BN), which involves using dredged material for nourishment, adding sand to extend an eroding beach. Although it has many advantages, the environmental impacts of BN remain poorly understood, especially on plastic pollution, which had not been investigated until this study. We aimed to compare the abundance and distribution of microplastics (MPs) found in intertidal sediments and specimens of the bivalve mollusks Crassostrea brasiliana, Mytella strigata, Perna perna, and Tivela mactroides, collected in two beaches of Vitoria, Southeast of Brazil (da Costa et al.
View Article and Find Full Text PDFMethod for the Mixing Design and Physical Characterization of Air-Foamed Lightweight Clay Concrete: A Response to the Issue of Recycling Dredged Sediments.
Materials (Basel)
December 2024
I2M (Institut de Mécanique et d'Ingénierie), UMR 5295, CNRS, University of Bordeaux, 33400 Talence, France.
From both economic and environmental points of view, the reuse of dredged sediments in the direct onsite casting of concrete represents a promising method for replacing sand. The aim of this study was to develop a cementitious material that (i) reuses the thin particles of sediments; (ii) has a low density due to the incorporation of air foam in the material; and (iii) achieves a minimum mechanical strength of 0.5 MPa for embankment applications.
View Article and Find Full Text PDFStudy on the Macro-/Micrometric Characteristics and Mechanical Properties of Clayey Sandy Dredged Fill in the Guangdong Area.
Materials (Basel)
December 2024
College of Civil Engineering, Hunan University of Science and Technology, Xiangtan 411201, China.
The study of dredged fill in Guangdong (GD), China, is of great significance for reclamation projects. Currently, there are relatively few studies on dredged fill in Guangdong, and there are many differences in the engineering characteristics of dredged fill foundations formed through land reclamation and natural foundations. In order to have a more comprehensive understanding of the physico-mechanical properties of blowing fill in the coastal area of GD and to understand the effect of its long-term creep row on the long-term settlement and deformation of buildings, the material properties, microstructure, elemental composition, triaxial shear properties, and triaxial creep properties of dredged fill in Guangdong were studied and analyzed through indoor geotechnical tests, scanning electron microscopy (SEM), X-ray diffraction (XRD), and conventional triaxial shear tests and triaxial creep tests.
View Article and Find Full Text PDFRealtime estimation of average sand grain diameter and sand bed height and mass for a trailing suction hopper dredger.
Sci Rep
November 2024
School of Intelligent Manufacturing, Nanyang Institute of Technology, Nanyang, 473004, Henan, China.
A Trailing Suction Hopper Dredger (TSHD) in the sailing process, excavating seabed sediment with the drag head and pumping it through the pipeline to the spoil hopper sedimentation. The spoil hopper sedimentation process, as a critical factor affecting the loading yield and efficiency of a dredger, is susceptible to the influence of different average sand grain diameter . However, the soil type tends to change continuously during the loading process, making it difficult to obtain the by measurement or calculation.
View Article and Find Full Text PDFAddition of mussel shells enhance marine benthic biodiversity in two degraded coastal soft sediment ecosystems.
Sci Total Environ
December 2024
Institute of Marine Science, University of Auckland, Auckland 1142, New Zealand.
The decline in coastal shellfish populations, attributed to anthropogenic stressors such as harvesting via dredging, can deplete the seabed of vital biogenic habitat. This removal of shellfish significantly reduces habitat complexity, biodiversity, and the hard substrate required for the natural recovery of some key species. A common method for oyster restoration involves deploying oyster shell material to provide habitat and substrate for settling larval oysters.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!