While the impact of load magnitude on spine dynamic parameters (stiffness and damping) has been reported, it is unclear how load history (exposure to prolonged loading) affects spine dynamic parameters in sagittal rotation. Furthermore, it is unknown if both spine stiffness and damping are equally affected to prolonged loading. Using a pendulum testing apparatus, the effect of load magnitude and load history on spine sagittal rotational stiffness and damping was assessed. Nine porcine lumbar functional spine units (FSUs) were tested in an increasing compressive load phase (ICP: 44.85, 68.55, 91.75, 114.6kg) and then a decreasing compressive load phase (DCP: 91.75, 68.55, and 44.85kg). Each trial consisted of flexing the FSU 5° and allowing it to oscillate unconstrained. During the ICP, both stiffness and damping linearly increased with load. However, in the DCP, stiffness and damping values were significantly higher than the identical load collected during the ICP, suggesting load history affects sagittal rotational dynamic parameters. In addition, spine damping was more affected by load history than spine stiffness. These results highlight the importance of controlling load magnitude and history when assessing spine dynamic parameters.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jbiomech.2016.02.002 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Damping Optimization and Energy Absorption of Mechanical Metamaterials for Enhanced Vibration Control Applications: A Critical Review.
Polymers (Basel)
January 2025
Department of Mechanical Engineering, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia.
Metamaterials are pushing the limits of traditional materials and are fascinating frontiers in scientific innovation. Mechanical metamaterials (MMs) are a category of metamaterials that display properties and performances that cannot be realized in conventional materials. Exploring the mechanical properties and various aspects of vibration and damping control is becoming a crucial research area.
View Article and Find Full Text PDFPlanar Two-Dimensional Vibration Isolator Based on Compliant Mechanisms.
Micromachines (Basel)
December 2024
School of Automotive and Mechanical Engineering, Changsha University of Science and Technology, Changsha 410114, China.
In practical engineering applications, the vibration is often generated in various directions and can be harmful to the engineering equipment. Thus, it is necessary to develop vibration isolators that can reduce vibration in multiple directions. In this paper, we propose a planar two-dimensional vibration isolator based on compliant mechanisms.
View Article and Find Full Text PDFMultiscale Engineered Bionic Solid-State Electrolytes Breaking the Stiffness-Damping Trade-Off.
Angew Chem Int Ed Engl
January 2025
Fudan University, 2005 Huhu Rd, Shanghai, CHINA.
All-solid-state lithium metal batteries are regarded as next-generation devices for energy storage due to their safety and high energy density. The issues of lithium dendrites and poor mechanical compatibility with electrodes present the need for developing solid-state electrolytes with high stiffness and damping, but it is a contradictory relationship. Here, inspired by the superstructure of tooth enamel, we develop a composite solid-state electrolyte composed of amorphous ceramic nanotube arrays intertwined with solid polymer electrolytes.
View Article and Find Full Text PDFEstablishing thresholds for swing transparency at the knee during gait to inform exoskeleton design.
PLoS One
January 2025
Department of Mechanical Engineering, Vanderbilt University, Nashville, TN, United States of America.
Knee exoskeletons have been developed to assist, stabilize, or improve human movement or recovery. However, exoskeleton designers must implement transparency (i.e.
View Article and Find Full Text PDFExperimental Study on Mechanical Performance of Single-Side Bonded Carbon Fibre-Reinforced Plywood for Wood-Based Structures.
Materials (Basel)
January 2025
Department of Integrated Design and Tribology Systems, Faculty of Mechanics and Technology, Rzeszów University of Technology, ul. Kwiatkowskiego 4, 37-450 Stalowa Wola, Poland.
In addition to the traditional uses of plywood, such as furniture and construction, it is also widely used in areas that benefit from its special combination of strength and lightness, particularly as a construction material for the production of finishing elements of campervans and yachts. In light of the current need to reduce emissions of climate-damaging gases such as CO, the use of lightweight construction materials is very important. In recent years, hybrid structures made of carbon fibre-reinforced plastics (CFRPs) and metals have attracted much attention in many industries.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!