Ion exchange at the critical point of solution.

J Chromatogr A

Department of Chemistry, University of Alabama in Huntsville, Huntsville, AL 35899, United States; Materials Science Graduate Program, University of Alabama in Huntsville, Huntsville, AL 35899, United States. Electronic address:

Published: March 2016

A mixture of isobutyric acid (IBA)+water has an upper critical point of solution at 26.7°C and an IBA concentration of 4.40M. We have determined the Langmuir isotherms for the hydroxide form of Amberlite IRN-78 resin in contact with mixtures of IBA+water at temperatures, 27.0, 29.0, 31.0 and 38.0°C, respectively. The Langmuir plot at 38.0°C forms a straight line. At the three lower temperatures, however, a peak in the Langmuir plot is observed for IBA concentrations in the vicinity of 4.40M. We regard this peak to be a critical effect not only because it is located close to 4.40M, but also because its height becomes more pronounced as the temperature of the isotherm approaches the critical temperature. For concentrations in the vicinity of the peak, the data indicate that the larger isobutyrate ion is rejected by the resin in favor of the smaller hydroxide ion. This reversal of the expected ion exchange reaction might be used to separate ions according to size. Using the Donnan theory of ion exchange equilibrium, we link the swelling pressure to the osmotic pressure. We show that the peak in the Langmuir plot is associated with a maximum in the "osmotic" energy. This maximum has its origin in the concentration derivative of the osmotic pressure, which goes to zero as the critical point is approached.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chroma.2016.01.029DOI Listing

Publication Analysis

Top Keywords

ion exchange
12
critical point
12
langmuir plot
12
point solution
8
peak langmuir
8
concentrations vicinity
8
osmotic pressure
8
ion
5
critical
5
exchange critical
4

Similar Publications

Multimetallic Half-Sandwich Complexes of the Rare-Earth Metals.

Inorg Chem

January 2025

Institut Für Anorganische Chemie, Universität Tübingen, Auf der Morgenstelle 18, 72076 Tübingen, Germany.

Multimetallic half-sandwich complexes of the paramagnetic lanthanides gadolinium, terbium, dysprosium, holmium, and erbium as well as of diamagnetic yttrium are readily accessible via AlMe/halogenido exchange reactions of Cp*Ln(AlMe) with the mild halogenido transfer reagents MeSiI and MeGeX (Cp* = CMe; X = Br, Cl). Depending on the rare-earth-metal center and halogenido ion size, complexes with distinct structural motifs and nuclearities are obtained, including dimeric compounds [Cp*Ln(AlMe)(μ-Cl)] for the smaller metal centers Ln = Ho, Er, iodido-bridged tetranuclear rings [Cp*Ln(μ-I)] (Ln = Y, Tb, Dy, Ho, Er), and a heterobimetallic tetramethylaluminato-bridged gadolinium cluster [Cp*GdI(AlMe)]. The tetranuclear dysprosium complex [Cp*Dy(μ-I)] shows single-molecule magnet (SMM) behavior in zero applied field with an effective energy barrier of 164(10) cm.

View Article and Find Full Text PDF

Covalent Organic Frameworks for Green Energy: Synthesis, Properties, and Applications.

Chem Asian J

January 2025

State Key Laboratory of Chemical Resource Engineering, College of Chemistry, Beijing University of Chemical Technology, Beijing, 100029, China.

Covalent organic frameworks (COFs) are a new type of porous organic crystalline material, which have become an emerging platform for promoting the development of green energy technology due to their high surface area, adjustable pores, low skeleton density, and easy functionalization. In recent years, with the continuous advancement of synthesis technology, the synthesis efficiency and sustainability of COFs have been significantly improved, from traditional solvothermal methods to the emergence of various green synthesis strategies such as ion thermal, mechanochemical, and ultrasound assisted methods. This article reviews the main synthesis methods of COFs and explores their applications in the field of green energy, such as photocatalysis, gas adsorption and separation, electrocatalysis, battery, supercapacitor and Proton exchange membrane fuel cell.

View Article and Find Full Text PDF

Highly Efficient and Durable Ammonia Electrolysis Cell Using Zirfon Separator.

Adv Sci (Weinh)

January 2025

Department of Materials Science and Engineering, Pohang University of Science and Technology, Gyeongbuk, 37673, Republic of Korea.

Most studies on ammonia electrolysis have focused on anion exchange membranes (AEMs), which face limitations in operating conditions, such as pH and ammonia concentration. This study introduces a novel concept of an ammonia electrolysis cell (AEC) utilizing a Zirfon separator capable of operating under high pH and ammonia concentrations. The Zirfon-based AECs achieve a peak current density of 915 mA cm, representing the highest reported value in AEC literature.

View Article and Find Full Text PDF

Nanoparticles (approximately 100 nm in diameter) composed of lipid layers containing drugs or biologically active substances are attracting increasing attention in various fields, including medicine, as well as for signal transduction between cells. However, the separation of such nanoparticles conventional HPLC is challenging, often resulting in the clogging and collapse of nanoparticles, as well as a low separation efficiency. Thus far, no HPLC column capable of efficiently separating two types of 100 nm-sized nanoparticles in a short time has been reported.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!