The elevated cost of anodic materials used in the anodic oxidation for water treatment of effluents undermines the real application of these technologies. The study of novel alternative materials more affordable is required. In this work, we report the application of Sn-Cu-Sb alloys as cheap anodic material to decolorize azo dye Acid Blue 29 solutions. These anodes have been synthesized by cold gas spray technologies. Almost complete decolorization and COD abatement were attained after 300 and 600 min of electrochemical treatment, respectively. The influence of several variables such as supporting electrolyte, pH, current density and initial pollutant concentration has been investigated. Furthermore, the release and evolution of by-products was followed by HPLC to better understand the oxidative power of Sn-Cu-Sb electrodes.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.chemosphere.2016.01.015 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Covalently crosslinked carboxymethyl chitosan beads containing SiO and ionic polymer for efficient adsorptive removal of methylene blue.
Int J Biol Macromol
January 2025
College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, PR China. Electronic address:
The carboxymethyl chitosan (CMCS)-based porous beads are still criticized for their limited number of binding sites, which impairs their efficacy in removing aqueous pollutants. To overcome this challenge, this work introduces the production of covalently crosslinked CMCS-based beads containing SiO and poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS). The porous composite beads not only possess remarkable stability under acidic conditions, but also have abundant active binding sites for adsorption.
View Article and Find Full Text PDFUltrathin zwitterionic COF membranes from colloidal 2D-COF towards precise molecular sieving.
Water Res
December 2024
College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, PR China. Electronic address:
Membrane technology is an important component of resource recovery. Covalent organic frameworks (COFs) with inherent long-range ordered structure and permanent porosity are ideal materials for fabricating advanced membrane. Zwitterionic COFs have unique features beyond single ionic COFs containing anions or cations.
View Article and Find Full Text PDFCoordination Equilibrium-Assisted Coprecipitation Synthesis of Atomically Dispersed 3d Metal Catalysts.
ACS Appl Mater Interfaces
January 2025
School of Physical Science and Technology, ShanghaiTech University, Shanghai 201210, People's Republic of China.
As a frontier of heterogeneous catalysis, single-atom catalysts (SACs) have been extensively studied fundamentally. One obstacle that limits the industrial application of SACs is the lack of a synthetic method that can prepare the catalysts on a large scale. Wet-chemistry methods that are conventionally used to prepare nanoparticle-based industrial catalysts might be a solution.
View Article and Find Full Text PDFHybrid polysaccharide film infused with polyoxometalates for inkless printing and solar ultraviolet sensing.
Int J Biol Macromol
January 2025
School of Chemistry and Chemical Engineering Southeast University, Jiangning District, Nanjing, Jiangsu Province 211189, PR China. Electronic address:
Inkless paper made from photochromic materials has garnered significant interest owing to its potential to reduce both ink and paper pollution during production. In this research, we synthesized a dual-material film (EC-PVP/PGMEA/PMoA) and conducted a detailed investigation of its photochromic response to visible light and its microstructural properties. Initially, the film appeared as a translucent yellow, but upon exposure to visible light, it shifted to blue with a maximum absorption peak of 2.
View Article and Find Full Text PDFOxygen vacancy-rich defective tungsten oxide (WO) modified by Prussian blue for efficient photocatalytic carbon dioxide conversion and tetracycline degradation.
J Colloid Interface Sci
December 2024
Laboratory of Alternative Energy Conversion Systems, Department of Mechanical Engineering, School of Engineering, University of Thessaly, Pedion Areos 38834, Greece. Electronic address:
The coupling of carbon dioxide (CO) with epoxides to produce cyclic carbonates is a desirable decarbonization approach, but its commercial applicability is still restricted by the costly catalysts required, as well as the need for high temperature and high pressure. Herein, oxygen vacancy-rich defective tungsten oxide (WO) rich in Lewis acid sites was modified by Prussian blue (PB), and the obtained composite reaches up to 94 % styrene carbonate yield (171 mmol gh) at ambient temperature and pressure, exhibiting outstanding advantages in the photocatalytic CO cycloaddition reaction compared with currently reported photocatalysts. It is found that the introduction of PB with photothermal properties significantly enhances the capability of WO to absorb and activate CO and epoxide, along with its light utilization ability.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!