Silicon-germanium (Si(1-x)Ge(x)) has become a material of great interest to the photonics and electronics industries due to its numerous interesting properties including higher carrier mobilities than Si, a tuneable lattice constant, and a tuneable bandgap. In previous work, we have demonstrated the ability to form localised areas of single crystal, uniform composition SiGe-on-insulator. Here we present a method of simultaneously growing several areas of SiGe-on-insulator on a single wafer, with the ability to tune the composition of each localised SiGe area, whilst retaining a uniform composition in that area. We use a rapid melt growth technique that comprises of only a single Ge growth step and a single anneal step. This innovative method is key in working towards a fully integrated photonic-electronic platform, enabling the simultaneous growth of multiple compositions of device grade SiGe for electro-absorption optical modulators operating at a range of wavelengths, photodetectors, and bipolar transistors, on the same wafer. This is achieved by modifying the structural design of the SiGe strips, without the need to modify the growth conditions, and by using low cost, low thermal-budget methods.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4725986 | PMC |
http://dx.doi.org/10.1038/srep19425 | DOI Listing |
We experimentally demonstrate a dual-polarized, single-input single-output (SISO) photonic-electronic integrated system, achieving a single-wavelength data rate of 400 Gbit/s at 220 GHz. This system is based on a self-developed IQ mixer, orthomode transducers (OMTs), and a dual-polarized multiplexing antenna (DPMA). The IQ mixer front-end exhibits a conversion loss of over 14 dB within a 30 GHz bandwidth, and cross talk between IQ channels is better than 15 dB for most frequency points.
View Article and Find Full Text PDFLight Sci Appl
September 2024
Department of Electronic Engineering, Tsinghua University, Beijing, 100084, China.
A novel non-volatile photonic-electronic memory, 3D integrating an Al-doped HfO ferroelectric thin film onto a silicon photonic platform using fully compatible electronic and photonic fabrication processes, enables electrically/optically programmable, non-destructively readable, and multi-level storage functions.
View Article and Find Full Text PDFLight Sci Appl
August 2024
Department of Electrical and Computer Engineering, National University of Singapore, Singapore, 119077, Singapore.
To reduce system complexity and bridge the interface between electronic and photonic circuits, there is a high demand for a non-volatile memory that can be accessed both electrically and optically. However, practical solutions are still lacking when considering the potential for large-scale complementary metal-oxide semiconductor compatible integration. Here, we present an experimental demonstration of a non-volatile photonic-electronic memory based on a 3-dimensional monolithic integrated ferroelectric-silicon ring resonator.
View Article and Find Full Text PDFACS Appl Mater Interfaces
August 2024
Key Laboratory of Flame Retardancy Finishing of Textile Materials (CNTAC), National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, Suzhou 215123, China.
Nat Commun
April 2024
Institute of Physics, Swiss Federal Institute of Technology Lausanne (EPFL), CH-1015, Lausanne, Switzerland.
Chip-scale integration is a key enabler for the deployment of photonic technologies. Coherent laser ranging or FMCW LiDAR, a perception technology that benefits from instantaneous velocity and distance detection, eye-safe operation, long-range, and immunity to interference. However, wafer-scale integration of these systems has been challenged by stringent requirements on laser coherence, frequency agility, and the necessity for optical amplifiers.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!