High photoluminescence quantum yield, easily tuned emission colors, and high color purity of perovskite nanocrystals make this class of material attractive for light source or display applications. Here, green light-emitting devices (LEDs) were fabricated using inorganic cesium lead halide perovskite nanocrystals as emitters. By introducing a thin film of perfluorinated ionomer (PFI) sandwiched between the hole transporting layer and perovskite emissive layer, the device hole injection efficiency has been significantly enhanced. At the same time, PFI layer suppressed charging of the perovskite nanocrystal emitters thus preserving their superior emissive properties, which led to the three-fold increase in peak brightness reaching 1377 cd m(-2). The full width at half-maximum of the symmetric emission peak with color coordinates of (0.09, 0.76) was 18 nm, the narrowest value among perovskite based green LEDs.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.nanolett.5b04959 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Designing Robust Quasi-2D Perovskites Thin Films for Stable Light-Emitting Applications.
Adv Mater
January 2025
Department of Physics, SUNY University at Buffalo, Buffalo, NY, 14220, USA.
Quasi-2D perovskite made with organic spacers co-crystallized with inorganic cesium lead bromide inorganics is demonstrated for near unity photoluminescence quantum yield at room temperature. However, light emitting diodes made with quasi-2D perovskites rapidly degrade which remains a major bottleneck in this field. In this work, It is shown that the bright emission originates from finely tuned multi-component 2D nano-crystalline phases that are thermodynamically unstable.
View Article and Find Full Text PDFInterfacial seed-assisted FAPbI crystallization and phase stabilization enhance the performance of all-air-processed perovskite solar cells.
Dalton Trans
January 2025
State Key Laboratory of Organic Electronics and Information Displays & Institute of Advanced Materials (IAM), School of Materials Science and Engineering, Nanjing University of Posts & Telecommunications, 9 Wenyuan Road, Nanjing 210023, China.
Formamidinium lead triiodide (FAPbI) has received significant attention in the field of perovskite solar cells (PSCs) owing to its excellent optoelectronic properties and high thermal stability. However, the photoactive α-FAPbI perovskites are highly susceptible to degradation into non-perovskite δ-FAPbI phases, especially under humid conditions, which severely diminishes the device performance of FAPbI PSCs. Here, we propose an interfacial seeding strategy for regulating crystallization and stabilizing α-FAPbI perovskites in humid air.
View Article and Find Full Text PDFSolvent-modulated preparation of lead-free CsBiIpolycrystalline film for high-performance photodetectors.
Nanotechnology
January 2025
School of Instrumentation Science and Opto-electronics Engineering, Beijing Information Science and Technology University, 12 Qinghe Xiaoying East Road, Xisanqi Street, Haidian District, Beijing, Beijing, 100192, CHINA.
Lead-free cesium bismuth iodide (CsBiI) perovskite exhibits extraordinary optoelectronic properties and attractive potential in various optoelectronic devices, especially the application for photodetectors. However, most CsBiIphotodetectors demonstrated poor detection performance due to the difficulty in obtaining high-quality polycrystalline films. Therefore, it makes sense to modulate the preparation of high-quality CsBiIpolycrystalline films and expand its applications.
View Article and Find Full Text PDFAnti-Scattering Perovskite Scintillator Arrays for High-Resolution Computed Tomography Imaging.
Adv Mater
January 2025
State Key Laboratory of Supramolecular Structure and Materials, College of Chemistry, Jilin University, Changchun, 130012, P. R. China.
Computed tomography (CT) imaging has emerge as an effective medical diagnostic technique due to its rapid and 3D imaging capabilities, often employing indirect imaging methods through scintillator materials. Arraying scintillators that can confine light scattering to enable high-resolution CT imaging remains an area of ongoing exploration for emerging perovskite scintillators. Here an anti-scattering cesium lead bromide (CsPbBr) scintillator array embedded within a polyurethane acrylate matrix for CT imaging using a cost-effective solution-processed method is reported.
View Article and Find Full Text PDFPhase stabilization of cesium lead iodide perovskites for use in efficient optoelectronic devices.
NPG Asia Mater
May 2024
Department of Chemistry, KU Leuven, Leuven, Belgium.
All-inorganic lead halide perovskites (LHPs) and their use in optoelectronic devices have been widely explored because they are more thermally stable than their hybrid organic‒inorganic counterparts. However, the active perovskite phases of some inorganic LHPs are metastable at room temperature due to the critical structural tolerance factor. For example, black phase CsPbI is easily transformed back to the nonperovskite yellow phase at ambient temperature.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!