This study addresses the effects of the pore structures of carbon materials used as cathodes for non-aqueous lithium-air batteries on cycle life. Carbon Nanofibers (CNFs) were synthesized by electrospinning polyacrylonitrile (PAN) and carbonization. The synthesized CNF was then converted to activated carbon nanofibers (ACNFs) under flowing CO2. The specific surface areas CNFs were increased on activation. ACNFs were arranged randomly to form a web-like structure providing both oxygen pathways and a means of discharging products. To examine the electrochemical properties of ACNF, charge-discharge tests were conducted using a Swagelok-type cell at a constant current density of 0.2 mA/cm2; impedance tests were also conducted. ACNF sheet electrodes had cycle lives of up to 50 cycles, which was attributed to high surface area and porosity, although overpotentials for both charge and discharge were high. This cycling performance showed that the pore structure of sheet ACNF is more suitable for the transport of oxygen and for the storage of discharge products than carbon powders.

Download full-text PDF

Source
http://dx.doi.org/10.1166/jnn.2015.11572DOI Listing

Publication Analysis

Top Keywords

activated carbon
8
carbon nanofibers
8
tests conducted
8
carbon
6
performance evaluation
4
evaluation activated
4
carbon nanofiber
4
nanofiber carbon
4
carbon supports
4
supports improve
4

Similar Publications

New insight into enhanced permanganate oxidation by lignocellulose-derived biochar: The overlooked role of persistent free radicals.

Water Res

December 2024

The Ministry of Education Key Laboratory of Northwest Water Resource, Environment and Ecology, Xi'an University of Architecture and Technology, Xi'an, 710055, PR China; Shaanxi Key Laboratory of Environmental Engineering, Xi'an University of Architecture and Technology, Xi'an, 710055, PR China. Electronic address:

Permanganate (Mn(VII)) is a traditional reagent used for water purification, but it is mild to deal with refractory organic contaminants of emerging concern. There is great interest in combination with effective and low-cost biochar to improve reaction kinetics of Mn(VII). Until recently, it still unclear how biomass composition and carbon structure of biochar influence the Mn(VII) oxidation performance.

View Article and Find Full Text PDF

Polychlorinated biphenyls (PCBs) are persistent organic pollutants and are emitted during e-waste activities. Once they enter into the environment, PCBs could pose toxic effects to environmental compartments and public health. Reductive dechlorination offers a sustainable solution to manage the PCBs-contaminated environment.

View Article and Find Full Text PDF

This study explores the enhanced adsorption performance of activated carbon felt (ACF) for Cu(II) and Cd(II) ions, achieved using a dual-synergistic approach combining MnO coating and plasma treatment. ACF's intrinsic properties, including a high surface area (~ 1000-2000 m²/g), large porosity, and excellent mechanical stability, make it a promising material for environmental applications. However, its limited surface functional groups hinder its adsorption efficiency for heavy metals.

View Article and Find Full Text PDF

A low-cost and renewable magnetite-pine bark (MPB) sorbent was evaluated in continuous-flow systems for the removal of various pharmaceuticals from municipal wastewater effluent following membrane bioreactor (MBR) treatment. A 33-day small-scale column test (bed volume: 791 cm) was conducted using duplicate columns of biochar (BC, Novocarbo) and activated carbon (AC, ColorSorb) as reference for two columns of BC and MPB in order to compare the efficiency of AC and MPB. After the small-scale column test, the pharmaceutical concentrations were generally below the detection limit.

View Article and Find Full Text PDF

The treatment of antibiotic wastewater often faces the challenge of simultaneously and effectively degrading multiple components under complex conditions. To address this challenge, magnetite nanoparticles doped ultrafine activated charcoal powder (MNPs/UACP), which effectively catalyzed the decomposition of HO into •OH and HO•, was prepared using chemical co-precipitation. Under optimum conditions (i.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!