In this study, nanomechanical properties were analyzed using a nanotribology method. The nanoindenter system is the main analysis method in nanotribology. The nanoindenter can measure the induced stresses, elastic modulus, and stabilities of Hf and HfO2 thin film surfaces as a function of the annealing temperature. The surface hardness and elastic modulus decreased, except at 600 °C, from 8.1 to 6.22 GPa and from 143.87 to 93.68 GPa, respectively, as the annealing temperature was increased from the as-deposited state to 800 °C. These results were related to the surface oxidation of the Hf thin film or the formation of a HfO2 monoclinic crystal. The change in the crystal structure caused an increase in volume that subsequently induced a compressive stress.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1166/jnn.2015.11171 | DOI Listing |
Sci Adv
January 2025
Department of Convergence IT Engineering, Pohang University of Science and Technology, 77 Cheongam-Ro, Pohang 37673, Republic of Korea.
Pressure and temperature sensing simultaneously and independently is crucial for creating electronic skin that replicates complex sensory functions of human skin. Thin-film transistor (TFT) arrays with sensors have enabled cross-talk-free spatial sensing. However, the thermal dependence of charge transport in semiconductors has resulted in interference between thermal and pressure stimuli.
View Article and Find Full Text PDFThis paper explores the process of forming arrays of vertically oriented carbon nanotubes (CNTs) localized on metal electrodes using thin porous anodic alumina (PAA) on a solid substrate. On a silicon substrate, a titanium film served as the electrode layer, and an aluminium film served as the base layer in the initial film structure. A PAA template was formed from the Al film using two-step electrochemical anodizing.
View Article and Find Full Text PDFCommun Mater
January 2025
Silicon Austria Labs GmbH, Graz, Austria.
Perovskites at the crossover between ferroelectric and relaxor are often used to realize dielectric capacitors with high energy and power density and simultaneously good efficiency. Lead-free BiNaTiO is gaining importance in showing an alternative to lead-based devices. Here we show that ()BiNaTiO - BaZr Ti O (best: 0.
View Article and Find Full Text PDFMXenes, a rapidly emerging class of 2D transition metal carbides, nitrides, and carbonitrides, have attracted significant attention for their outstanding properties, including high electrical conductivity, tunable work function, and solution processability. These characteristics have made MXenes highly versatile and widely adopted in the next generation of optoelectronic devices, such as perovskite and organic solar cells. However, their integration into silicon-based optoelectronic devices remains relatively underexplored, despite silicon's dominance in the semiconductor industry.
View Article and Find Full Text PDFSmall
January 2025
State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing, 100084, China.
PbZrO (PZO) thin films, as a classic antiferroelectric material, have attracted tremendous attention for their excellent dielectric, electromechanical, and thermal switching performances. However, several fundamental questions remain unresolved, particularly the existence of an intermediate phase during the transition from the antiferroelectric (AFE) to ferroelectric (FE) state. Here, a phase coexistence configuration of an orthorhombic AFE phase and a tetragonal-like (T-like) phase is reported in epitaxial antiferroelectric PZO thin films, with thickness ranging from 16 to 110 nm.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!