Objectives: The aims of the present study were to determine the prevalence of temporomandibular disorder (TMD) in a sample of patients with Parkinson's disease (PD) and to analyze the distribution of occlusal contacts.
Method: The sample was composed of patients with PD aged 50-75 years. Temporomandibular disorder was evaluated using the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). The distribution of occlusal contacts was determined using the portable T-Scan III occlusal analysis system during maximum voluntary clenching. Fisher's exact test was used to test the association between TMD and occlusal contact symmetry.
Results: Forty-two individuals with PD were analyzed. The prevalence of TMD was 23.8%. No statistically significant association was found between TMD and occlusal contact symmetry. Moreover, no significant difference in the distribution of occlusal contacts was found between the groups with and without TMD.
Discussion: The present data suggest no association between TMD and occlusal contact asymmetry in individuals with PD.
Conclusion: The results of this study identified a prevalence of 23.8% of TMD signs in subjects with PD and a high frequency of occlusal asymmetry in this sample.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1080/08869634.2015.1097315 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material.
J Vis Exp
December 2024
School of Engineering and Materials Science, Queen Mary University of London.
Article Synopsis
- The study evaluates the fracture strength of 1 mm-thick CAD/CAM occlusal veneers made from lithium disilicate (LD) and resin nanoceramics (RNC) to assess their viability in dental restoration.
- Using a novel testing protocol, the RNC group demonstrated a significantly higher load-bearing capacity compared to the LD group, indicating better durability under stress.
- Both materials experienced similar crack patterns during testing, emphasizing the importance of understanding mechanical properties for ensuring the longevity of dental restorations.
Effect of different CAD-CAM post and core materials in endodontically treated teeth without ferrule and with non-circular root canals: 3D finite element analysis.
J Prosthodont Res
January 2025
Department of Prosthodontics, Faculty of Dentistry, Khon Kaen University, Khon Kaen, Thailand.
Purpose: Restoring ferrule-lacking, noncircular canal endodontically treated teeth (ETT) poses challenges owing to the increased susceptibility to root fracture and post dislodgement. We aimed to evaluate the influence of different post and core materials on the stress distribution and maximum Von Mises stress in ETT.
Methods: Four three-dimensional models were generated using different customized post and core materials: gold alloy, resin nanoceramic, polyetheretherketone (PEEK), and polyetherketoneketone (PEKK).
Experimental investigation and finite element analysis on the durability of root-filled teeth treated with multisonic irrigation.
Dent Mater
January 2025
Minnesota Dental Research Center for Biomaterials and Biomechanics, School of Dentistry, University of Minnesota, Minneapolis, MN, USA. Electronic address:
Objective: This study compared the fracture load, stress distribution, and survival probability under cyclic loading of extensively restored teeth treated with multisonic irrigation with those treated with conventional instrumentation, with or without a post.
Methods: Mesial-occlusal-distal cavities were prepared in 30 human mandibular premolars. The teeth were randomly divided into 3 groups of 10 based on the endodontic and restorative procedures: (1) Root canal treatment (RCT) followed by resin composite restoration (control group), (2) RCT followed by a glass fiber post restoration (conventional group), and (3) minimal instrumentation plus multisonic irrigation followed by resin composite restoration (GW group).
Effect of Different Cantilever Lengths in Polyether Ether Ketone Prosthetic Framework in All-on-Four Technique on Stress Distribution: A Three-Dimensional (3D) Finite Element Analysis.
Cureus
November 2024
Department of Removable Prosthodontics, Syrian Arab Republic Damascus University Faculty of Dental Medicine, Damascus, SYR.
Background: Determining the distal cantilever length in All-on-Four (All-on-4) implant-supported prostheses is a major factor in the long-term success of these prostheses. The difference in mechanical properties of materials used in the fabrication of these prostheses, such as polyether ether ketone (PEEK), may have an impact on the determination of the cantilever length that best distributes stress.
Aim: To study the distribution of stress in All-on-4 mandibular prostheses in the bone, implants, and framework according to difference cantilever length in PEEK prosthetic framework using three-dimensional finite element analysis.
Automatic adjustment of dental crowns using Laplacian mesh editing.
J Mech Behav Biomed Mater
December 2024
Department of Prosthetic Dentistry and Biomedical Materials Science, Hannover Medical School, Carl-Neuberg-Str. 1, 30625, Hannover, Germany. Electronic address:
Currently, the restoration of missing teeth by means of dental implants is a common treatment method in dentistry. Ensuring optimal contact between teeth (occlusion) when designing the occlusal surface of an implant-supported crown is crucial for the patient. Although there are various occlusal concepts and guidelines for achieving optimised occlusion, adapting an occlusal surface is challenging.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!