Direct Reduction of Graphene Oxide by Ni Foam as a High-Capacitance Supercapacitor Electrode.

ACS Appl Mater Interfaces

State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China.

Published: January 2016

AI Article Synopsis

  • Three-dimensional reduced graphene oxide (RGO)/Ni foam composites are created using a simple method that avoids harmful reducing agents, allowing RGO sheets to form around Ni foam pillars at room temperature.
  • The composites serve as binder-free supercapacitor electrodes with adjustable areal capacitance by changing reduction times; for instance, 15 days of reduction boosts capacitance from 26.0 to 136.8 mF cm(-2).
  • Higher temperatures significantly enhance reduction efficiency, with a 5-hour reduction at 70 °C yielding impressive capacitance of 206.7 mF cm(-2) and excellent long-term stability, maintaining 97.4% capacity after 10,000 cycles.

Article Abstract

Three dimensional reduced graphene oxide (RGO)/Ni foam composites are prepared by a facile approach without using harmful reducing agents. Graphene oxide is reduced by Ni foam directly in its aqueous suspension at pH 2 at room temperature, and the resultant RGO sheets simultaneously assemble around the pillars of the Ni foam. The RGO/Ni foam composite is used as a binder-free supercapacitor electrode and exhibits high electrochemical properties. Its areal capacitance is easily tuned by varying the reduction time for different RGO loadings. When the reduction time increases from 3 to 15 days, the areal capacitance of the composite increases from 26.0 to 136.8 mF cm(-2) at 0.5 mA cm(-2). Temperature is proven to be a key factor in influencing the reduction efficiency. The composite prepared by 5 h reduction at 70 °C exhibits even better electrochemical properties than its counterpart prepared by 15 day reduction at ambient temperature. The 5 h RGO/Ni foam composite shows an areal capacitance of 206.7 mF cm(-2) at 0.5 mA cm(-2) and good rate performance and cycling stability with areal capacitance retention of 97.4% after 10000 cycles at 3 mA cm(-2). Further extending the reduction time to 9 h at 70 °C, the composite shows a high areal capacitance of 323 mF cm(-2) at 0.5 mA cm(-2). Moreover, the good rate performance and cycling stability are still maintained.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.5b11337DOI Listing

Publication Analysis

Top Keywords

areal capacitance
20
graphene oxide
12
rgo/ni foam
12
reduction time
12
cm-2 cm-2
12
supercapacitor electrode
8
foam composite
8
electrochemical properties
8
cm-2 good
8
good rate
8

Similar Publications

W/WO/TiO Multilayer Film with Elevated Electrochromic and Capacitive Properties.

Materials (Basel)

January 2025

College of Physics and Electronic Information, Shandong Key Laboratory of Biophysics, Dezhou University, Dezhou 253023, China.

Electrochromic capacitors, which are capable of altering their appearances in line with their charged states, are drawing substantial attention from both academia and industry. Tungsten oxide is usually used as an electrochromic layer material for electrochromic devices, or as an active material for high-performance capacitor electrodes. Despite this, acceptable visual aesthetics in electrochromic capacitors have almost never been achieved using tungsten oxide, because, in its pure form, this compound only displays a onefold color modulation from transparent to blue.

View Article and Find Full Text PDF
Article Synopsis
  • Cobalt oxide (CoO) is an attractive electrode material for supercapacitors due to its affordability, natural abundance, non-toxicity, and high capacitance.
  • Researchers developed a binder-less molybdenum doped CoO (Mo@CoO) integrated electrode using a simple electric discharge corrosion (EDC) method, which allows for direct synthesis without templates or additives.
  • The study found that the Mo@CoO based supercapacitor with a specific discharge pulse width achieved a significantly higher capacitance and quick charge/discharge capabilities, showcasing the EDC method's potential for fabricating efficient electrodes for energy storage and sensing applications.
View Article and Find Full Text PDF

In situ oxidized MoCT MXene film via electrochemical activation for smart electrochromic supercapacitors.

J Colloid Interface Sci

January 2025

College of Chemical and Pharmaceutical Engineering, Jilin Institute of Chemical Technology, Jilin 132022, PR China. Electronic address:

MoCT MXenes have great potential for multifunctional energy storage applications because of their outstanding electrical conductivity, superior cycling stability, and high optical transmittance. In this study, we fabricate MoCT film electrodes (referred to as MoC) on fluorine-doped tin oxide (FTO) substrates using the layer-by-layer (LbL) self-assembly technique. To improve the energy-storage performance of MoCT film electrodes, we develop a convenient electrochemical activation process to prepare in situ oxidized MoCT/MoO film electrodes (referred to as EA-MoC).

View Article and Find Full Text PDF
Article Synopsis
  • The study focuses on developing safe and cost-effective aqueous electrolytes for improving electrochemical performance, specifically targeting lower salt concentrations and wider electrochemical stable potential windows.
  • The authors synthesize porphyrin-based covalent organic polymers (COPs) using a simple method, enhancing their conductivity by wrapping them around multiwall carbon nanotubes.
  • Among the different polymers, MWCNT@PTZ-COP shows the best performance in electrochemical applications, achieving high specific capacitance, energy density, and exceptional stability after numerous charge-discharge cycles.
View Article and Find Full Text PDF

Additive Fabrication of Polyaniline and Carbon-Based Composites for Energy Storage.

Polymers (Basel)

November 2024

School of Physics, Institute of Science, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand.

The growing demand for efficient energy storage systems, particularly in portable electronics and electric vehicles, has led to increased interest in supercapacitors, which offer high power density, rapid charge/discharge rates, and long cycle life. However, improving their energy density without compromising performance remains a challenge. In this study, we developed novel 3D-printed reduced graphene oxide (rGO) electrodes coated with polyaniline (PANI) to enhance their electrochemical properties.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!