Geopolymer concrete mixes were cast using fly ash, kaolin, sodium hydroxide, potassium hydroxide, sodium silicate and aggregates. Portland cement concrete (M30) was used as a reference sample. The effect of silica fume, temperature (40 °C, 60 °C, 80 °C, 100 °C and 120 °C), sodium and potassium hydroxides and different superplasticizers on the compressive strength are reported [1]. Maximum strength was found at 100 °C and 14 M alkali solution [1].
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4659805 | PMC |
| http://dx.doi.org/10.1016/j.dib.2015.10.029 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Analysis of strength failure in gangue-based cementitious backfill body from a microscopic perspective.
PLoS One
April 2024
Northwest Geological Exploration Institute, China Metallurgical Geology Bureau, Xi'an, Shanxi, China.
Backfill mining is an effective way to solve environment pollute, surface subsidence, and groundwater system damage which caused by coal mining. However, the complex underground environment may change the physical and mechanical properties of the backfill body, which poses a risk of strength failure. This paper analyzed the failure of gangue-based cemented backfill body which made up of gangue and fly ash.
View Article and Find Full Text PDFMigration and transformation of trace elements during sewage sludge and coal slime Co-combustion.
Chemosphere
December 2023
State Key Laboratory of Coal Combustion, School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan, 430074, China. Electronic address:
Co-combustion of sewage sludge (SS) and coal slime (CS) could improve the combustion properties of the two materials, however, high levels of trace elements (TEs) can be released from the two wastes, resulting in secondary pollution. The migration and transformation behavior of As, Cr, Pb, Zn, and Mn during co-combustion is explored in current research. The results showed co-combustion could inhibit the emission of Zn, As, Pb, and Mn, and the effect was more pronounced for Zn, As and Mn.
View Article and Find Full Text PDFEffects of different supplementary cementitious materials on durability and mechanical properties of cement composite - Comprehensive review.
Heliyon
July 2023
Department of Materials, Energy Science and Engineering, The Nelson Mandela African Institution of Science and Technology, P.O. Box 447, Arusha, Tanzania.
Ordinary Portland cement is the highest produced cement type in the world, however its production is high energy consumption means expensive, huge natural resource consumptive, and creating high environmental pollution. Hence many researchers studied to reduce the effect of ordinary Portland cement by substituting artificial and natural supplementary cementitious materials (SCMs) commonly in a concrete/mortar mixture. However, the comprehensive effect of different SCMs on various properties of cement composite materials are not well known.
View Article and Find Full Text PDFEffect of Sintering Mechanism towards Crystallization of Geopolymer Ceramic-A Review.
Materials (Basel)
May 2023
Department of Civil Engineering, Faculty of Engineering, Universitas Negeri Malang, Malang 65145, Indonesia.
Globally, there is an increasing need for ceramic materials that have a variety of applications in the environment, for precision tools, and for the biomedical, electronics, and environmental industries. However, in order to obtain remarkable mechanical qualities, ceramics have to be manufactured at a high temperature of up to 1600 °C over a long heating period. Furthermore, the conventional approach presents issues with agglomeration, irregular grain growth, and furnace pollution.
View Article and Find Full Text PDFEffect of phosphogypsum adding on setting kinetics and mechanical strength of geopolymers based on metakaolin or fly ash matrices.
Environ Sci Pollut Res Int
November 2024
Laboratory of Interface Materials and Environment, Faculty of Sciences Aïn Chock, University Hassan II Casablanca, 53306, Casablanca, Morocco.
Our study aims to highlight the effects of the addition of phosphogypsum on certain fresh and hardened characteristics of geopolymer matrices based on metakaolin or fly ash. In the fresh state, workability and setting were studied by rheology and by the electrical conductivity measurement. The hardened state was characterized by XRD, DTA, SEM, and compressive strength measurement.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!