A novel hybrid integrated scheme is proposed for a high-performance resonant micro-optic gyro (RMOG), which requires a low-loss micro-ring resonator for mass production. A new record for the RMOG is established experimentally with a short fiber ring resonator and an integrated signal detecting and processing circuit. The finesse of the short fiber ring resonator with a length of 60 cm and a diameter of 4.77 cm is as high as 202, and the theoretical sensitivity of the RMOG is better than 0.3°/h assuming the average optical intensity at the photodetector is 1 mW. The 60 cm long spliceless micro-ring resonator is experimentally proved to be sufficient for a tactical-grade RMOG. An angle random walk coefficient of 0.64°/√h and a typical bias stability below 9.6°/h for the integration time of 50 s are successfully demonstrated using an innovative open-loop approach for an operation time of 1600 s.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OL.40.005862 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Non-destructive prediction and pixel-level visualization of polysaccharide-based properties in ancient paper using SWNIR hyperspectral imaging and machine learning.
Carbohydr Polym
March 2025
Plant Fiber Material Science Research Center, State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, No. 100, West Outer Ring Road, Guangzhou University Town, Panyu District, Guangzhou 510006, China.
Ancient documents and artworks are invaluable cultural heritage artworks that require careful preservation. Traditional methods for assessing their physical and chemical properties-such as tearing index, tensile index, water absorption, and pH-are often destructive, risking irreversible damage. This study introduces a novel, non-destructive approach using Short-Wave Near-Infrared (SWNIR) hyperspectral imaging (HSI) combined with advanced machine learning models.
View Article and Find Full Text PDFFiber ring laser biosensor based on no-core fibers for label-free DNA biomolecule measurements.
RSC Adv
January 2025
College of Electronic Engineering, Huainan Normal University Huainan 232038 China
An erbium-doped fiber ring laser based on a single-mode fiber-no-core fiber-single-mode fiber (SMF-NCF-SMF) structure was constructed and experimentally demonstrated for label-free DNA hybridization measurement. The SMF-NCF-SMF structure acts as a sensing element and a filter to select the laser wavelength. The proposed fiber ring laser sensor exhibits a high optical signal-to-noise ratio (SNR, >50 dB) and narrow full width at half maximum (FWHM, <0.
View Article and Find Full Text PDFHexagonal Hollow Core PCF-Based Blood Components Sensing: Design and Simulation.
Cell Biochem Biophys
January 2025
Department of Electronics and Communication Engineering, Hajee Mohammad Danesh Science and Technology University, Dinajpur, 5200, Bangladesh.
Blood components play a crucial role in maintaining human health and accurately detecting them is essential for medical diagnostics. A cutting-edge sensor utilizing PCF revealed to precisely identify a wide range of blood components with WBCs (white blood cells), RBCs (red blood cells), HB (hemoglobin), platelets, and plasma. A numerical analysis was performed using COMSOL Multiphysics software to assess the capabilities of the sensor.
View Article and Find Full Text PDFThe DNA damage response (DDR) mechanisms that allow cells to tolerate DNA replication stress are critically important for genome stability and cell viability. Using an unbiased genetic screen we identify a role for the RING finger E3 ubiquitin ligase RNF25 in promoting DNA replication stress tolerance. In response to DNA replication stress, RNF25-deficient cells generate aberrantly high levels of single-stranded DNA (ssDNA), accumulate in S-phase and show reduced mitotic entry.
View Article and Find Full Text PDFMuscle activity mapping by single peak localization from HDsEMG.
J Electromyogr Kinesiol
January 2025
Department of Biomedical Engineering, Faculty of Engineering, Lund University, Lund, Sweden.
Human-machine interfaces using electromyography (EMG) offer promising applications in control of prosthetic limbs, rehabilitation assessment, and assistive technologies. These applications rely on advanced algorithms that decode the activation patterns of muscles contractions. This paper presents a new approach to assess and decode muscle activity by localizing the origin of individual temporal peaks in high-density surface EMG recordings from the dorsal forearm during low force finger extensions.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!