The design of the mobility enhancement robotic wheelchair (MEBot) was based on input from electric powered wheelchair (EPW) users regarding the conditions they encounter when driving in both indoor and outdoor environments that may affect their safety and result in them becoming immobilized, tipping over, or falling out of their wheelchair. Phase I involved conducting a participatory design study to understand the conditions and barriers EPW users found to be difficult to drive in/over. Phase II consisted of creating a computer-aided design (CAD) prototype EPW to provide indoor and outdoor mobility that addressed these conditions with advanced applications. Phase III involved demonstrating the advanced applications and gathering feedback from end users about the likelihood they would use the advanced applications. The CAD prototype incorporated advanced applications, including self-leveling, curb climbing, and traction control, that addressed the challenging conditions and barriers discussed with EPW users (n = 31) during the participatory design study. Feedback of the CAD design and applications in phase III from end users (n = 12) showed a majority would use self-leveling (83%), traction control (83%), and curb climbing (75%). The overall design of MEBot received positive feedback from EPW users. However, these opinions will need to be reevaluated through user trials as the design advances.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1682/JRRD.2014.11.0278 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Perceptions and assessment of a novel robotic wheelchair transfer system.
J Spinal Cord Med
August 2024
Human Engineering Research Laboratories, School of Health and Rehabilitation Sciences, Pittsburgh, Pennsylvania, USA.
Objectives: Wheelchair transfers risk injury to users and caregivers. Conventional transfer devices are injury-prone and time inefficient. The Powered Personal Transfer System (PPTS), utilizing a modified Electric Powered Wheelchair (EPW) and a hospital bed, provides a no-lift solution for bed-to-wheelchair transfers.
View Article and Find Full Text PDFA heuristic-based approach for assessing usability in electric powered wheelchairs: A preliminary investigation.
Rehabilitacion (Madr)
April 2024
Faculty of Electrical Engineering, Federal University of Uberlândia, Assistive Technologies Group, Uberlândia, Brazil.
Objective: An important issue related to electric powered wheelchair (EPW) is usability. Recent studies did not use heuristic evaluation and did not consider users' and developers' participation in the usability evaluation process of the EPW, especially when it has to be driven using alternative commands. Thus, this study investigates the use of heuristics to evaluate the usability of EPW driven by alternative commands, considering the opinion of users and assistive technology (AT) development professionals.
View Article and Find Full Text PDFElectric powered wheelchair control using user-independent classification methods based on surface electromyography signals.
Med Biol Eng Comput
January 2024
Department of Computing Technologies, Swinburne University of Technology, Melbourne, Australia.
Wheelchairs are one of the most popular assistive technology (AT) among individuals with motor impairments due to their comfort and mobility. People with finger problems may find it difficult to operate wheelchairs using the conventional joystick control method. Therefore, in this research study, a hand gesture-based control method is developed for operating an electric-powered wheelchair (EPW).
View Article and Find Full Text PDFParticipatory Action Design and Engineering of Powered Personal Transfer System for Wheelchair Users: Initial Design and Assessment.
Sensors (Basel)
June 2023
Human Engineering Research Laboratories, School of Health and Rehabilitation Sciences, Pittsburgh, PA 15206, USA.
Caregivers that assist with wheelchair transfers are susceptible to back pain and occupational injuries. The study describes a prototype of the powered personal transfer system (PPTS) consisting of a novel powered hospital bed and a customized Medicare Group 2 electric powered wheelchair (EPW) working together to provide a no-lift solution for transfers. The study follows a participatory action design and engineering (PADE) process and describes the design, kinematics, and control system of the PPTS and end-users' perception to provide qualitative guidance and feedback about the PPTS.
View Article and Find Full Text PDFEvaluation of Power Wheelchair Dynamic Suspensions for Tip Prevention in Non-ADA Compliant Surfaces.
Arch Phys Med Rehabil
December 2023
Veterans Affairs Pittsburgh Healthcare System and Human Engineering Research Laboratories, Pittsburgh, PA; Department of Bioengineering, School Swanson of Engineering, University of Pittsburgh, Pittsburgh, PA; Department of Rehabilitation Sciences and Technology, School of Health and Rehabilitation Sciences, University of Pittsburgh, Pittsburgh, PA.
Objective: To evaluate the driving performance and usability of a mobility enhancement robot (MEBot) wheelchair with 2 innovative dynamic suspensions compared with commercial electric powered wheelchair (EPW) suspensions on non-American with Disabilities Act (ADA) compliant surfaces. The 2 dynamic suspensions used pneumatic actuators (PA) and electro-hydraulic with springs in series electrohydraulic and spring in series (EHAS).
Design: Within-subjects cross-sectional study.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!