Introduction: To study the effect of various sprue designs on the properties of base metal alloy castings. The base metal alloys are extensively used for their excellent properties such as an increase in hardness, high melting range, high elastic modulus, its compatibility with ceramic material and low cost. However, to improve the properties of the base metal alloys is an ongoing research leading to various modifications in their fabrication procedure - which include sprue designs and their mode of attachment to the wax pattern.
Aims And Objectives: Study compared the effect of three sprue designs viz. conical sprue, cylindrical sprue and bottleneck sprue on the properties of mass and microhardness of base metal alloy castings.
Materials And Methods: A prefabricated wax mesh pattern was selected for the fabrication of the alloy test samples in the study. The cylindrical sprue design was connected to the mesh pattern with a straight attachment. The bottleneck sprue design was connected to the mesh pattern with a constricted attachment. The conical sprue design was connected to the mesh pattern with a flared attachment. In this manner, ten samples for each of the three different sprue designs were prepared.
Results: The obtained value for mass and microhardness were subjected to statistical analysis. ANOVA test was performed to determine the difference between the sprue designs.
Conclusion: The bottleneck sprue, conical sprue, and cylindrical sprue designs did not exert any apparent influence on the mass and microhardness.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4606653 | PMC |
| http://dx.doi.org/10.4103/0975-7406.163527 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Radiation tolerance and biodegradation performance of a marine bacterium Acinetobacter sp. Y9 in radioactive composite oil-contaminated wastewater.
Water Environ Res
January 2025
Zhejiang Key Laboratory of Petrochemical Environmental Pollution Control, Zhejiang Ocean University, Zhoushan, P. R. China.
The tolerance and degradation characteristics of a marine oil-degrading strain Acinetobacter sp. Y9 were investigated in the presence of diesel oil and simulated radioactive nuclides (Mn, Co, Ni, Sr, Cs) at varying concentrations, as well as exposure to γ-ray radiation (Co-60). The maximum tolerable concentrations for Coand Ni were found to be 5 mg/l and 25 mg/l, respectively, while the tolerable concentrations for Mn, Sr, and Cs exceeded 400 mg/l, 1000 mg/l, and 1000 mg/l, respectively.
View Article and Find Full Text PDFA Schiff base-functionalized chitosan magnetic bio-nanocomposite for efficient removal of Pb (II) and Cd (II) ions from aqueous solutions.
Int J Biol Macromol
January 2025
Department of Chemistry, Faculty of Science, Arak University, Arak 38481-77584, Iran; Institute of Nanosciences &Nanotechnology, Arak University, Arak, Iran. Electronic address:
The rapid industrialization and human activities in catchments have posed notable global challenges in removing of heavy metal contaminants from wastewater. Here, Schiff-bases (SB) of cyanoguanidine (CG) and salicylaldehyde (SA) were covalently grafted on a magnetic nanocomposite of chitosan to form a hybrid magnetic nanostructure (FeO@CS-CGSB). The synthesized structure was characterized using various techniques such as Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), dynamic light scattering (DLS), zeta potential, and Brunauer-Emmett-Teller surface area analysis (BET).
View Article and Find Full Text PDFSelective Hydrogen Isotope Exchange Catalysed by Simple Alkali-Metal Bases in DMSO.
Angew Chem Int Ed Engl
January 2025
Universitat Bern, Department of Chemistry and Biochemistry, Freiestrasse 3, 3012, Bern, SWITZERLAND.
Isotope Exchange processes are becoming the preferred way to prepare isotopically labelled molecules, avoiding the redesign of multistep synthetic protocols. In the case of deuterium incorporation, the most used strategy has employed transition metals, that offer high reactivity under mild reaction conditions. Despite their success, the trade-off is that these metals are precious, and often exhibit high toxicity.
View Article and Find Full Text PDFGreen-Emitting AIEgen for Fluorescent Switch-Off Detection of Multi-Cations and Applications.
J Fluoresc
January 2025
Department of Chemistry, Sardar Vallabhbhai National Institute Technology, Surat, Gujarat, 395007, India.
An easy-to-synthesize aggregation-induced emission (AIE) active Schiff base HNSA was obtained by condensing equimolar amount of 3-hydroxy-2-naphthohydrazide and salicylaldehyde. In pure DMSO, HNSA is non-fluorescent, but increasing the HEPES (HO, 10 mM, pH 7.4) fraction (f) ≥ 90% showed an intense green fluorescence with maximum fluorescence intensity at 515 nm.
View Article and Find Full Text PDFAlloying effect modulated electronic structure of Mo-doped PdIn bimetallene nanoribbons for ambient electrosynthesis of urea.
Chem Commun (Camb)
January 2025
State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang 310014, P. R. China.
Designing advanced catalysts for electrosynthesis of urea is of significance yet remains challenging. Herein, ultrathin two-dimensional Mo-doped PdIn bimetallene nanoribbons were synthesized a one-pot method. Material characterization and electrochemical study revealed that the alloying effect enabled electron transfer from In to Pd and provided dual metal sites with regulated electronic structure for the adsorption and activation of NO and CO, thus facilitating the generation of key active intermediates and promoting the C-N coupling reaction.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!