Organic-inorganic halide perovskite-based thin film solar cells show excellent light-to-power conversion efficiency. The high performance for the devices requires the preparation of well-crystallized perovskite absorbers. In this paper, we used the postannealing process to treat the perovskite films under different solvent vapors and observed that the solvent vapors have a strong effect on the film growth. A model regarding the perovskite film growth was proposed as well. Intensive characterizations including scanning electron microscopy, electrochemical impedance spectroscopy, and admittance spectroscopy allowed us to attribute the improved performance to reduced recombination loss and defect density. Solar cell based on the DMSO-treated films delivered a power conversion efficiency of over 13% with negligible photocurrent hysteresis.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.5b06780 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Wenzel Interfaces Design for Homogeneous Solute Distribution Obtains Efficient and Stable Perovskite Solar Cells.
Adv Mater
January 2025
College of Chemistry and Chemical Engineering/Film Energy Chemistry for Jiangxi Provincial Key Laboratory (FEC), Nanchang University, 999 Xuefu Avenue, Nanchang, 330031, China.
The coffee-ring effect, caused by uneven deposition of colloidal particles in perovskite precursor solutions, leads to poor uniformity in perovskite films prepared through large-area printing. In this work, the surface of SnO is roughened to construct a Wenzel model, successfully achieving a super-hydrophilic interface. This modification significantly accelerates the spreading of the perovskite precursor solution, reducing the response delay time of perovskite colloidal particles during the printing process.
View Article and Find Full Text PDFMultifunctional Organic Molecule for Defect Passivation of Perovskite for High-Performance Indoor Solar Cells.
Materials (Basel)
January 2025
Key Laboratory of Applied Surface and Colloid Chemistry, National Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Laboratory for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an 710119, China.
Perovskite solar cells (PSCs) can utilize the residual photons from indoor light and continuously supplement the energy supply for low-power electron devices, thereby showing the great potential for sustainable energy ecosystems. However, the solution-processed perovskites suffer from serious defect stacking within crystal lattices, compromising the low-light efficiency and operational stability. In this study, we designed a multifunctional organometallic salt named sodium sulfanilate (4-ABS), containing both electron-donating amine and sulfonic acid groups to effectively passivate the positively-charged defects, like under-coordinated Pb ions and iodine vacancies.
View Article and Find Full Text PDFUnveiling the Influence of Hot Carriers on Photovoltage Formation in Perovskite Solar Cells.
Materials (Basel)
December 2024
Laboratory of Electronic Processes, Center for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania.
The experimental and theoretical study of photovoltage formation in perovskite solar cells under pulsed laser excitation at 0.53 μm wavelength is presented. Two types of solar cells were fabricated on the base of cesium-containing triple cation perovskite films: (1) Cs(FAMA)Pb(IBr) and (2) Cs(FAMA)PbSn(IBr).
View Article and Find Full Text PDFSynthesis, Structure, and Electrophysical and Electrochemical Properties of Novel Composite LaMnO-LaFeO.
Molecules
December 2024
Department of Chemistry, Faculty of Natural Sciences, Kazakh National Women's Teacher Training University, Gogol 114/1, Almaty 050000, Kazakhstan.
This article presents the synthesis, electrophysical, and catalytic properties of a LaMnO-LaFeO nanocomposite material. The nanocomposite was synthesized via the sol-gel (Pechini) method. X-ray diffraction (XRD) analysis revealed a polycrystalline, biphasic perovskite structure combining both hexagonal and cubic symmetry.
View Article and Find Full Text PDFAll-perovskite tandem solar cells achieving >29% efficiency with improved (100) orientation in wide-bandgap perovskites.
Nat Mater
January 2025
National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, College of Engineering and Applied Sciences, Frontiers Science Center for Critical Earth Material Cycling, Nanjing University, Nanjing, China.
Monolithic all-perovskite tandem solar cells present a promising approach for exceeding the efficiency limit of single-junction solar cells. However, the substantial open-circuit voltage loss in the wide-bandgap perovskite subcell hinders further improvements in power-conversion efficiency. Here we develop wide-bandgap perovskite films with improved (100) crystal orientation that suppress non-radiative recombination.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!