The salient optical properties of highly luminescent semiconductor nanocrystals render them ideal fluorophores for clinical diagnostics, therapeutics, and highly sensitive biochip applications. Microfluidic systems allow miniaturization and integration of multiple biochemical processes in a single device and do not require sophisticated diagnostic tools. Herein, we describe a microfluidic system that integrates RNA extraction, reverse transcription to cDNA, amplification and detection within one integrated device to detect histidine decarboxylase (HDC) gene directly from human white blood cells samples. When anisotropic semiconductor nanorods (NRs) were used as the fluorescent probes, the detection limit was found to be 0.4 ng of total RNA, which was much lower than that obtained using spherical quantum dots (QDs) or organic dyes. This was attributed to the large action cross-section of NRs and their high probability of target capture in a pull-down detection scheme. The combination of large scale integrated microfluidics with highly fluorescent semiconductor NRs may find widespread utility in point-of-care devices and multitarget diagnostics.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.analchem.5b01942 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Preparation of Molecularly Imprinted Electrochemical Sensors and Analysis of the Doping of Epinephrine in Equine Blood.
Sensors (Basel)
December 2024
Shandong Provincial Key Laboratory of Monocrystalline Silicon Semiconductor Materials and Technology, Shandong Provincial Engineering Research Center of Organic Functional Materials and Green Low-Carbon Technology, Shandong Universities Engineering Research Center of Integrated Circuits Functional Materials and Expanded Applications, College of Chemistry and Chemical Engineering, Dezhou University, Dezhou 253023, China.
In this paper, a novel molecularly imprinted polymer membrane modified glassy carbon electrode for electrochemical sensors (MIP-OH-MWCNTs-GCE) for epinephrine (EP) was successfully prepared by a gel-sol method using an optimized functional monomer oligosilsesquioxane-AlO sol-ITO composite sol (ITO-POSS-AlO). Hydroxylated multi-walled carbon nanotubes (OH-MWCNTs) were introduced during the modification of the electrodes, and the electrochemical behavior of EP on the molecularly imprinted electrochemical sensors was probed by the differential pulse velocity (DPV) method. The experimental conditions were optimized.
View Article and Find Full Text PDFElectrical Characteristics of Solution-Based Thin-Film Transistors with a Zinc-Tin Oxide/Carbon Nanotube Stacked Nanocomposite Active Layer.
Nanomaterials (Basel)
December 2024
Department of Semiconductor Engineering, Hoseo University, Asan 31499, Republic of Korea.
A stacked nanocomposite zinc-tin oxide/single-walled carbon nanotubes (ZTO/SWNTs) active layer was fabricated for thin-film transistors (TFTs) as an alternative to the conventional single-layer structure of mixed ZTO and SWNTs. The stacked nanocomposite of the solution-processed TFTs was prepared using UV/O treatment and multiple annealing steps for each layer. The electrical properties of the stacked device were superior to those of the single-layer TFT.
View Article and Find Full Text PDFModulating electronic properties in hydrogenated silicon nanotubes.
Phys Chem Chem Phys
January 2025
Department of Energy and Refrigerating Air-Conditioning Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan.
This study employs first-principles calculations to investigate the geometric and electronic properties of hydrogenated silicon nanotubes (SiNTs). SiNTs, particularly in their gear-like configuration, demonstrate unique semiconducting behavior; however, their relatively small intrinsic band gaps limit their applicability in fields requiring moderate band gaps. Significant changes in electronic properties are observed by hydrogenating SiNTs at various levels of adsorption-either full or partial-and different surface configurations (exterior, interior, or dual-sided).
View Article and Find Full Text PDFCu-Doped MnO Catalysts for Effective Fruit Preservation via Ozone Synergistic Catalytic Oxidation.
Foods
December 2024
State Key Laboratory of Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China.
Developing and implementing technologies that can significantly reduce food loss during storage and transport are of paramount importance. Ozone synergistic catalytic oxidation (OSCO) technology has been developed, which sterilizes bacteria and viruses on the surface of food and degrades ethylene released during fruit storage through the active oxygen produced by the catalytic decomposition of ozone. Herein, we report the hydrothermal synthesis of MnO with distinct phase compositions and nanostructures through simply varying the reaction temperatures.
View Article and Find Full Text PDFPhotocatalytic Semiconductor-Metal Hybrid Nanoparticles: Single-Atom Catalyst Regime Surpasses Metal Tips.
ACS Nano
January 2025
Institute of Chemistry, The Hebrew University of Jerusalem, Jerusalem 9190401, Israel.
Semiconductor-metal hybrid nanoparticles (HNPs) are promising materials for photocatalytic applications, such as water splitting for green hydrogen generation. While most studies have focused on Cd containing HNPs, the realization of actual applications will require environmentally compatible systems. Using heavy-metal free ZnSe-Au HNPs as a model, we investigate the dependence of their functionality and efficiency on the cocatalyst metal domain characteristics ranging from the single-atom catalyst (SAC) regime to metal-tipped systems.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!