AI Article Synopsis

  • The study explored the use of dead leaves from the Dracaena draca plant as a biosorbent to effectively remove Cadmium (Cd(2+)) from water.
  • It utilized a factorial experimental design to analyze three factors: metal ion concentration, hydrogen ion concentration, and biomass dose, determining their impact on biosorption efficiency.
  • Results indicated that the highest removal efficiency of 79.60% occurred under specific conditions, and the biosorbent could be reused with a regeneration efficiency exceeding 99.7%.

Article Abstract

In this research, dead leaves of a common ornamental plant, Dracaena draca known also as dragon tree was used as a biosorbent for the removal of Cadmium (Cd(2+)) from aqueous solutions using a full 2(3) factorial experimental design. Three factors were investigated at two different levels, metal ion concentration (X = 10 and 100 ppm), hydrogen ion concentration (Ph = 2 and 7) and biomass dose (BD = 0.1 and 0.5g). Experiments were carried out in duplicates with 50 ml of Cd(2+) solutions at room temperature. When comparing observed values (experimental) with calculated values (model), they were set closely together that allowed suggesting a normal distribution where (R(2) = 0.9938). A characterization of the biosorbent was done by pHzpc and SEM-EDAX. Results also showed that the most significant effect for Cd(2+) biosorption was ascribed to (X). The interaction effects of (pH BD) and (X pH) were found to have significant influence on Cd(2+) removal efficiency. The highest Cd(2+) removal percentage attained by 79.60% at X = 10 ppm, pH = 7 and BD = 0.5g. The reusability of the biosorbent was tested in three desorption cycles and the regeneration efficiency was above 99.7%.

Download full-text PDF

Source
http://dx.doi.org/10.1080/15226514.2015.1086305DOI Listing

Publication Analysis

Top Keywords

cd2+ removal
12
cadmium cd2+
8
aqueous solutions
8
ion concentration
8
cd2+
6
optimization cadmium
4
removal
4
removal aqueous
4
solutions novel
4
biosorbent
4

Similar Publications

To address cadmium pollution in China's cultivated land, chitosan, inorganic and organic selenium were used to modify rice husk charcoal for cadmium inhibition. Basic physicochemical properties of rice husk carbons were characterized (BET, FTIR, XRD, Zeta potential). Kinetic and isothermal adsorption experiments studied the adsorption of Cd by modified biochar under different pH and dosages.

View Article and Find Full Text PDF

Enhanced MICP for Soil Improvement and Heavy Metal Remediation: Insights from Landfill Leachate-Derived Ureolytic Bacterial Consortium.

Microorganisms

January 2025

Key Laboratory of Meteorological Disaster, Ministry of Education (KLME)/Joint International Research Laboratory of Climate and Environmental Change (ILCEC)/Collaborative Innovation Centre on Forecast and Evaluation of Meteorological Disasters (CIC-FEMD), Nanjing University of Information Science & Technology, Nanjing 210044, China.

This study investigates the potential of microbial-induced calcium carbonate precipitation (MICP) for soil stabilization and heavy metal immobilization, utilizing landfill leachate-derived ureolytic consortium. Experimental conditions identified yeast extract-based media as most effective for bacterial growth, urease activity, and calcite formation compared to nutrient broth and brown sugar media. Optimal MICP conditions, at pH 8-9 and 30 °C, supported the most efficient biomineralization.

View Article and Find Full Text PDF

Carbon residue from co-pyrolysis of cartons and plastics: Characteristics, environmental behaviors and applications.

J Environ Manage

January 2025

School of Environmental Science and Engineering, Tianjin University, Tianjin, 300072, China. Electronic address:

The continuously growing of municipal solid waste (MSW) has posed a threat to human-being. Pyrolysis is a promising technique for MSW disposal, as it can reduce its volume and produce valuable products as well. This study evaluated the potential of carbon residue (CR) derived from waste carton as soil amendment.

View Article and Find Full Text PDF

Insight into Iron(III)-Tannate Biosorbent for Adsorption Desalination and Tertiary Treatment of Water Resources.

ACS Omega

January 2025

Department of Nanoscience, Joint School of Nanoscience & Nanoengineering, University of North Carolina at Greensboro, 1907 East Gate City Blvd, Greensboro, North Carolina 27401, United States.

An innovative biosorbent-based water remediation unit could reduce the demand for freshwater while protecting the surface and groundwater sources by using saline water resources, such as brine, brackish water, and seawater for irrigation. Herein, for the first time, we introduce a simple, rapid, and cost-effective iron(III)-tannate biosorbent-based technology, which functions as a stand-alone fixed-bed filter system for the treatment of salinity, heavy-metal contaminants, and pathogens present in a variety of water resources. Our approach presents a streamlined, cost-efficient, energy-saving, and sustainable avenue for water treatment, distinct from current adsorption desalination or conventional membrane techniques supplemented with chemical and UV treatments for disinfection.

View Article and Find Full Text PDF

An increasing amount of water pollution is being caused by an increase in industrial activity. Recently, a wide range of methods, including extraction, chemical coagulation, membrane separation, chemical precipitation, adsorption, and ion exchange, have been used to remove heavy metals from aqueous solutions. The adsorption technique is believed to be the most highly effective method for eliminating heavy metals from wastewater among all of them.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!