We demonstrate an excellent 20/400 Yb-doped fiber in this work, from fabrication and measurement to application. To obtain good laser properties, some crucial parameters including the refractive index profile, geometrical morphology, and coating require precise controlling. Through a 7:1 pump combiner with six 120 W 915 nm fiber-coupled pump diode modules, a single all-fiber laser oscillator generated 500 W of continuous wave signal power at 1080 nm with 76.4% slope efficiency that is close to the theoretical limit. The signal power showed no evidence of roll-over and the highest output power was limited only by available pump power. This excellent 20/400 Yb-doped fiber could find application in higher-power fiber lasers.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/AO.54.006516 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
We report a single-end forward-pumped fiber laser with a record high output power of 3 kW. The laser is assembled exclusively from commercially widespread components such as the Yb-doped fiber with core/cladding diameter of 20/400 µm, pump laser diodes at an emission wavelength of 915 nm, and a signal and pump fiber combiner that serves as the pump recycler. The record high power arises from the combination of the 915 nm pumping and pump recycler with an effective reflectivity of 78%, increasing simultaneously the thresholds for stimulated Raman scattering and transverse mode instability (TMI).
View Article and Find Full Text PDFAn intermodal-nonlinearity-induced time-frequency evolution model of high-power near-single-mode continuous-wave fiber lasers (NSM-CWHPFLs) was proposed to simulate the evolution of spectral characteristics and beam quality under the combined action of intermodal and intramodal nonlinear effects. The influence of fiber laser parameters on intermodal nonlinearities was analyzed, and a suppression method involving fiber coiling and seed mode characteristic optimization was proposed. Verification experiments were conducted with 20/400, 25/400, and 30/600 fiber-based NSM-CWHPFLs.
View Article and Find Full Text PDFWe report an effective pump recycler for industrial kilowatt fiber lasers. The pump recycler is a (6+1)×1 tapered fiber bundle, with signal ports of Ge-doped fiber (GDF) with core/cladding diameters of 20/400 µm and pump fiber ports (PFPs) with core/cladding diameters of 135/155 µm. By splicing PFPs in pairs, 77.
View Article and Find Full Text PDFA new, to the best of our knowledge, method for inscribing fiber Bragg gratings inside a fiber's cladding based on the motorized rotation of the fiber is reported. By minimizing the aberrations induced by the fiber curvature on the femtosecond writing beam, this technique based on a phase mask allows to cover large transverse areas of a standard high-power fiber's cladding. With this approach, a first-order Bragg grating was inscribed in the pure-silica inner cladding of a 20/400-µm fiber.
View Article and Find Full Text PDFTraditional monolithic fiber lasers can only achieve unidirectional high-power laser output. In this Letter, a novel high-power linear cavity fiber laser that can achieve bidirectional high-power output is proposed and demonstrated. In an ordinary laser resonant cavity, we replace the high-reflectivity fiber Bragg grating with a low-reflectivity fiber Bragg grating to realize bidirectional laser output.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!