In this study, we propose green/red bilayered freestanding phosphor film-capped white light-emitting diodes (W-LEDs) using InGaN blue LEDs and narrowband red and green phosphors to realize a wide color gamut in a liquid crystal display (LCD) backlight system. The narrowband K2SiF6:Mn4+ (KSF) red and SrGa2S4:Eu2+ (SGS) green phosphors are synthesized using a facile etching synthetic process and flux-aided solid state reaction under a H2S atmosphere, respectively, and the freestanding phosphor films are fabricated using a delamination method with water-soluble polymer, polystyrene sulfonic acid, PEDOT/PSS, and interlayered phosphor film. Various phosphor concentrations of green/red bilayered freestanding phosphor film-capped W-LEDs exhibit a correlated color temperature (CCT) and luminous efficacy range of 11,390 K ~6,540 K and 99 lm/W ~124 lm/W, respectively, with an applied current of 60 mA. The W-LED with green (12.5 wt%)/red (40 wt%) bilayered phosphor film, which exhibited luminous efficacy of 105 lm/W at the CCT of 8,330 K, is selected and the color gamut of the bare LED and phosphor RG and the filtered RGB triangle is calculated to be more than ~95% and ~86.4%, respectively, relative to the NTSC in the 1931 CIE color coordinates space.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/OE.23.00A791 | DOI Listing |
Angew Chem Int Ed Engl
January 2025
Department of Chemistry, Indian Institute of Science Education and Research (IISER), Pune, 411008, India.
Phosphor converted light emitting diodes (pc-LEDs) have revolutionized solid-state white lighting by replacing energy-inefficient filament-based incandescent lamps. However, such a pc-LED emitting ultrabroad near-infrared (NIR) radiations still remains a challenge, primarily because of the lack of ultrabroad NIR emitting phosphors. To address this issue, we have prepared 2.
View Article and Find Full Text PDFACS Omega
February 2023
Department of Sciences, Amrita School of Physical Sciences, Coimbatore, Amrita Vishwa Vidyapeetham, Coimbatore641112, Tamil Nadu, India.
The contemporary work focuses on embossing the emissive nature of lead halide perovskite materials, specifically CsPbBr microcrystal powder prepared via single step bulk recrystallization method followed by the solvent evaporation route from gram to kilogram scale. The X-ray diffraction pattern confirms the formation of phase pure CsPbBr with a goodness of fit value of 1.51 calculated from Rietveld refinement and the fluorophore powder manifesting an intrinsic band gap of 3.
View Article and Find Full Text PDFACS Omega
September 2021
Advanced Molecular Materials Research Centre (AMMRC), Mahatma Gandhi University, Kottayam, Kerala 686560, India.
Recently, freestanding polymer thin films encapsulated with nanostructures have attracted the significant attention of the scientific community due to their promising application in portable optoelectronic devices. In this research contribution, we have fabricated a freestanding polymer thin film of poly(vinyl alcohol) (PVA) encapsulated with carbon nitride quantum dots (CN-QDs) using the casting method, for the first time. The PVA polymer matrix provides mechanical support as well as dispersion of the CN-QDs preventing its solid-state quenching.
View Article and Find Full Text PDFThe color-tuning capability of solid-state lighting (SSL) systems are highly demanded for smart lighting according to the environmental conditions, as well as wireless sensing of the environmental information. In the meanwhile, state-of-the-art triboelectric nanogenerator (TENG)-based sensing systems rely on bulky and expensive devices, which require cable connections and additional power consumptions. This work aims at solving these challenges, through developing a tribo-induced color tuner that can be integrated into the vastly distributed commercial SSL system.
View Article and Find Full Text PDFNanoscale
January 2021
Physics of Supramolecular Systems and Surfaces, Bielefeld University, 33615 Bielefeld, Germany.
The discovery of graphene has triggered a great interest in inorganic as well as molecular two-dimensional (2D) materials. In this review, we summarize recent progress in the mechanical characterization of free-standing 2D materials, such as graphene, hexagonal boron nitride (hBN), transition metal-dichalcogenides, MXenes, black phosphor, carbon nanomembranes (CNMs), 2D polymers, 2D metal organic frameworks (MOFs) and covalent organic frameworks (COFs). Elastic, fracture, bending and interfacial properties of these materials have been determined using a variety of experimental techniques including atomic force microscopy based nanoindentation, in situ tensile/fracture testing, bulge testing, Raman spectroscopy, Brillouin light scattering and buckling-based metrology.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!