This is the premier study designed to evaluate the impact of thermal pre-treatment on the availability of polycyclic aromatic hydrocarbons (PAHs) for successive removal by chemical oxidation. Experiments were conducted in two soils having different PAH distribution originating from former coking plant sites (Homécourt, H, and Neuves Maisons, NM) located in northeast of France. Soil samples were pre-heated at 60, 100, and 150 °C for 1 week under inert atmosphere (N2). Pre-heating resulted in slight removal of PAHs (<10%) and loss of extractable organic matter (EOM). Then, these pre-heated soil samples were subjected to Fenton-like oxidation (H2O2 and magnetite) at room temperature. Chemical oxidation in soil without any pre-treatment showed almost no PAH degradation underscoring the unavailability of PAHs. However, chemical oxidation in pre-heated soils showed significant PAH degradation (19, 29, and 43% in NM soil and 31, 36, and 47% in H soil pre-treated at 60, 100, and 150 °C, respectively). No preferential removal of PAHs was observed after chemical oxidation in both soils. These results indicated the significant impact of pre-heating temperature on the availability of PAHs in contaminated soils and therefore may have strong implications in the remediation of contaminated soils especially where pollutant availability is a limiting factor.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s11356-015-5369-7 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Innovative Powder Pre-Treatment Strategies for Enhancing Maraging Steel Performance.
Materials (Basel)
January 2025
Department of Metals and Corrosion Engineering, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Praha 6-Dejvice, 166 28 Prague, Czech Republic.
Maraging steel is a high-performance material valued for its exceptional properties, making it ideal for demanding applications such as aerospace, tooling, and automotive industries, where high strength, toughness, and precision are required. These steels can be prepared by powder metallurgy techniques, which offer new processing possibilities. This paper introduces novel thermal powder pre-treatment and its impact on the final mechanical properties.
View Article and Find Full Text PDFCurrent Updates on Molecular Diagnostic Assays Used for Detection of : A Systematic Review.
Diagnostics (Basel)
January 2025
Department of Microbiology, Faculty of Medicine, The Chinese University of Hong Kong, Hong Kong SAR, China.
: is an emerging multidrug-resistant pathogen with the potential to cause invasive fungal infections and healthcare-associated outbreaks. Currently, there is no systematic review explicitly focusing on the up-to-date molecular diagnostics of this pathogen to cover the entire process, including sample pre-extraction procedures, nucleic acid extraction, and DNA-based detection. Sample pre-treatment and extraction are the prerequisites before molecular testing and have implications on the downstream detection but have not been reviewed elsewhere.
View Article and Find Full Text PDFEffect of pre-treatment conditions on the electrochemical performance of hard carbon derived from bio-waste.
RSC Adv
January 2025
Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University Astana Kazakhstan
Sodium-ion batteries (SIBs) offer several advantages over traditional lithium-ion batteries, including a more uniform sodium distribution, lower-cost materials, and safer transportation options. A promising development in SIBs is the use of hard carbons as anode materials due to their low insertion voltage and larger interlayer spacing, which improve sodium-ion insertion. Traditionally, hard carbons are made from costly carbon sources, but recent advancements have focussed on using abundant bio-waste, like coffee grounds.
View Article and Find Full Text PDFAnaerobic sludge digestion enhancement with bioelectrochemical and electrically conductive materials augmentation: A state of the art review.
Chemosphere
January 2025
DICAR University of Pavia, Pavia, 27100, Italy. Electronic address:
Excess biological sludge processing and disposal have a significant impact on the energy balance and economics of wastewater treatment operations, and on receiving environments. Anaerobic digestion is probably the most widespread in-plant sludge processing method globally, since it stabilizes and converts biosolids organic matter into biogas, allowing partial recovery of their embedded chemical energy. A considerable number of studies concerning applicable techniques to improve biogas production, both in quantity and quality, include pre-treatment strategies to promote biosolids disintegration aimed at the release and solubilization of intracellular energy compounds, inorganic/biological amendments aimed at improving process performance, and sludge thermal pre-treatment.
View Article and Find Full Text PDFInterface Enhancement and Tribological Properties of Cattle Manure-Derived Corn Stalk Fibers for Friction Materials: The Role of Silane Treatment Concentration.
Polymers (Basel)
December 2024
College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China.
Corn stalk fibers extracted from cattle manure (CSFCM) represent a unique class of natural fibers that undergo biological pre-treatment during ruminant digestion. This study systematically investigates the optimization of CSFCM-reinforced friction materials through controlled silane treatment (2-10 wt.%).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!