We have studied the influence of particle shape and consequently loading configuration on the breakage load of fluvial pebbles. Unfortunately, physical strength tests on pebbles, i.e., point-load tests, can only be conducted under one specific stable loading configuration. Therefore, the physical uniaxial strength tests performed in this study were extended by a two-dimensional finite-element stress analysis, which is capable of investigating those scenarios that are not possible in physical tests. Breakage load, equivalent to that measured in unidirectional physical tests, was determined from the results of the stress analysis by a maximum tensile stress-based failure criterion. Using this assumption, allows the determination of breakage load for a range of different kind of synthetic loading configurations and its comparison with the natural breakage load distribution of the physical strength tests. The results of numerical modelling indicated that the configuration that required the least breakage load corresponded with the minor principal axis of the ellipsoidal pebbles. In addition, most of the simulated gravel-hosted loading configurations exceeded the natural breakage load distribution of fluvial pebbles obtained from the physical strength tests.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4542200 | PMC |
| http://dx.doi.org/10.1016/j.ijrmms.2012.05.018 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Suture Anchor Fixation of the Pediatric Posteromedial and Posterolateral Menisco-Tibial Ligament Complex Matches or Exceeds Native Tissue Strength: A Cadaveric Study.
J ISAKOS
January 2025
Department of Orthopaedic Surgery, Stanford University, Stanford, California, USA. Electronic address:
Objectives: To compare the biomechanical strength and stiffness of the native posteromedial and posterolateral meniscotibial ligament complex (MTLC) to suture anchor repair of the MTLC.
Methods: Biomechanical testing was performed on 24 fresh-frozen pediatric human knees. Four conditions were tested: native posteromedial MTLC (n=14), native posterolateral MTLC (n=14), posteromedial MTLC repair (n=5), and posterolateral MTLC repair (n=5).
Flexible Phase Change Materials with High Energy Storage Density Based on Porous Carbon Fibers.
Polymers (Basel)
December 2024
Guangdong Provincial Key Laboratory of Functional and Intelligent Hybrid Materials and Devices, Guangdong Basic Research Center of Excellence for Energy and Information Polymer Materials, State Key Laboratory of Luminescent Materials and Devices, South China Advanced Institute for Soft Matter Science and Technology, School of Emergent Soft Matter, South China University of Technology, Guangzhou 510640, China.
Phase change fibers (PCFs) can effectively store and release heat, improve energy efficiency, and provide a basis for a wide range of energy applications. Improving energy storage density and preserving flexibility are the primary issues in the efficient manufacture and application development of PCFs. Herein, we have successfully fabricated a suite of flexible PCFs with high energy storage density, which use hollow carbon fibers (HCFs) encapsulated phase change materials (PCMs) to provide efficient heat storage and release, thereby enhancing energy efficiency and underpinning a broad range of energy applications.
View Article and Find Full Text PDFEvolution of crushing process of coarse-grained soil filler under the trains load.
Sci Rep
January 2025
School of Railway Engineering, Hunan Technical College of Railway High-Speed, Hengyang, 421002, China.
Research on the evolutionary behavior of the particle breakage processes in coarse-grained soil under the action of train load is of practical significance for subgrade construction and maintenance. However, existing studies have not addressed the prediction of particle size distribution evolution. In this paper, the MTS loading system is used to simulate the dynamic train load effect on coarse-grained soil fillers.
View Article and Find Full Text PDFResearch on the influence of loading rate on the dynamic initiation fracture toughness of CMDB propellant.
Sci Rep
December 2024
School of Mechanical Engineering, Key Laboratory of Special Engine Technology, Ministry of Education, Nanjing University of Science and Technology, Nanjing, 210094, People's Republic of China.
In the field of gun launched missile extended range rocket, the propellant grain in the rocket needs to withstand significant launch loads during their firing phase, and also bear the high pressure caused by ignition, and the impact of launch overloads and ignition shocks on the structural integrity of propellants becomes very important. So this work investigated the dynamic initiation fracture toughness of the composite modified double-base (CMDB) propellant by both experiments and numerical simulations. The dynamic mechanical properties test of the cracked straight through flattened Brazilian disc (CSTFBD) specimens were conducted using a modified Split Hopkinson pressure bar (SHPB).
View Article and Find Full Text PDFRisk factors for Implant Failure in Thoracolumbar Fractures Treated with Posterior Long-Segment Instrumentation.
Clin Orthop Surg
December 2024
Department of Orthopaedic Surgery, Ajou University School of Medicine, Suwon, Korea.
Background: Posterior long-segment instrumentation (PLSI) enables the stable repair of thoracolumbar fractures (TLFx) and is thus widely used. However, patients with highly unstable fractures may experience implant failure and related complications (e.g.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!