Alexandria Governorate contracted an international company in the field of municipal solid waste management for the collection, transport and disposal of municipal solid waste. Construction and operation of the sanitary landfill sites were also included in the contract for the safe final disposal of solid waste. To evaluate the environmental impacts associated with solid waste landfilling, leachate and groundwater quality near the landfills were analyzed. The results of physico-chemical analyses of leachate confirmed that its characteristics were highly variable with severe contamination of organics, salts and heavy metals. The BOD5/COD ratio (0.69) indicated that the leachate was biodegradable and un-stabilized. It was also found that groundwater in the vicinity of the landfills did not have severe contamination, although certain parameters exceeded the WHO and EPA limits. These parameters included conductivity, total dissolved solids, chlorides, sulfates, Mn and Fe. The results suggested the need for adjusting factors enhancing anaerobic biodegradation that lead to leachate stabilization in addition to continuous monitoring of the groundwater and leachate treatment processes.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4506963 | PMC |
| http://dx.doi.org/10.1016/j.jare.2014.02.003 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Alkali and sulfate effects on mechanical properties and microscopic mechanisms of slag and fly ash geopolymers.
Sci Rep
January 2025
College of Hydraulic and Civil Engineering, Xinjiang Agricultural University, Urumqi, 830052, Xinjiang, People's Republic of China.
Aiming at the problem that it is difficult to realize low-cost, high-performance and large-scale utilization of cementitious materials prepared from bulk solid wastes, this paper constructs a set of composite cementitious system based on alkaline activation of slag and fly ash (FA) by calcium carbide slag (CCS) and synergistic activation of sodium sulfate (NaSO) as a chemical dopant. The influence of factors such as solid waste type, mixing ratio, and NaSO content on the mechanical properties of composite cementitious systems was investigated by assessing compressive strength and analyzing microstructure using XRD, SEM-EDS, and FTIR. The test results indicate that CCS and NaSO exert significant influences on the strength of the composite cementitious system.
View Article and Find Full Text PDFPolycotton waste textile recycling by sequential hydrolysis and glycolysis.
Nat Commun
January 2025
Van 't Hoff Institute for Molecular Sciences, University of Amsterdam, Amsterdam, The Netherlands.
As a result of the current high throughput of the fast fashion collections and the concomitant decrease in product lifetime, we are facing enormous amounts of textile waste. Since textiles are often a blend of multiple fibers (predominantly cotton and polyester) and contain various different components, proper waste management and recycling are challenging. Here, we describe a high-yield process for the sequential chemical recycling of cotton and polyester from mixed waste textiles.
View Article and Find Full Text PDFCofactor-directed co-immobilization of dual-enzyme on functionalized montmorillonite with enhanced catalytic performance.
Int J Biol Macromol
January 2025
School of Environment and Resource, Key Laboratory of Solid Waste Treatment and Resource Recycle of Ministry of Education, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China.
Recently, multi-enzyme cascade catalysis has attracted increasing attention due to the advantages of integrating multiple enzymes, few side reactions and high catalytic efficiency. Herein, a novel dual-enzyme cascade system (GOx-FMt-HRP) was developed through cofactor-directed orientational co-immobilization of glucose oxidase (GOx) and horseradish peroxidase (HRP) onto functional montmorillonite (FMt). The presented method realizes the reconstitution of cofactors and apo-enzymes (enzymes without cofactors), which enables enzymes to be immobilized in specific orientations on the support, thereby effectively reducing changes in their conformation.
View Article and Find Full Text PDFEstimating wastewater emissions and environmental levels of typical organic contaminants based on regionalized modelling.
Environ Res
January 2025
The Key Laboratory of Environmental Pollution Health Risk Assessment, Research Center of Emerging Contaminants, South China Institute of Environmental Sciences, Ministry of Ecology and Environment, Guangzhou 510655, P.R. China.
Organic contaminants (OCs) are released into the environment through effluent discharges from wastewater treatment plants (WWTP), posing risks to environment health. However, emissions from various source, particularly large-scale investigations across different industries, remain poorly understood. Based on both sampling and statistical data, this study estimates the emissions of 10 OCs, including perfluorooctane acid (PFOA), perfluorooctane sulfonate (PFOS), 4-nonylphenol (4-NP), 4-tert-octylphenol (4-t-OP), dibutyl phthalate (DBP), di-iso-butyl phthalate (DIBP), dimethyl phthalate (DMP), butyl benzyl phthalate (BBP), di(2-ethylhexyl) phthalate (DEHP), and bisphenol A (BPA), from the effluents of 160 factories across 8 industries, 541 municipal wastewater treatment plants (MWWTPs), and 8 waste treatment plants (WTPs) in the upper Yangtze River Basin.
View Article and Find Full Text PDFComprehensive evaluation of low-carbon cementitious materials prepared with industrial by-product calcium carbide residue (CCR) as alkali source.
Environ Res
January 2025
Science and Technology Innovation Center of Smart Water and Resource Environment, Northeastern University, Shenyang 110819, China; School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China; Liaoning Institute of Technological Innovation in Solid Waste Utilization, Northeastern University, Shenyang 110819, China.
The preparation of low-carbon cementitious materials through the synergistic coupling of multiple solid wastes has great potential for development, which can improve the problems of resource shortage and environmental pollution. In this paper, a new type of supersulfated cement was developed by using calcium carbide residue (CCR) as an alkaline activator. The effects of CCR content on the mechanical properties and hydration behaviors of the samples under steam curing conditions were discussed.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!