This paper focuses on the improvement of a relaxor ferroelectric terpolymer, i.e., poly (vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) [P(VDF-TrFE-CFE)], filled with a bis(2-ethylhexyl) phthalate (DEHP). The developed material gave rise to a significantly increased longitudinal electrostrictive strain, as well as an increased mechanical energy density under a relatively low electric field. These features were attributed to the considerably enhanced dielectric permittivity and a decreased Young modulus as a result of the introduction of only small DEHP plasticizer molecules. In addition, the plasticizer-filled terpolymer only exhibited a slight decrease of the dielectric breakdown strength, which was a great advantage with respect to the traditional polymer-based electrostrictive composites. More importantly, the approach proposed herein is promising for the future development and scale-up of new high-performance electrostrictive dielectrics under low applied electrical fields through modification simply by blending with a low-cost plasticizer. An experimental demonstration based on a flexible micro-fluidic application is described at the end of this paper, confirming the attractive characteristics of the proposed materials as well as the feasibility of integrating them as micro-actuators in small-scale devices.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5155611PMC
http://dx.doi.org/10.1038/srep11814DOI Listing

Publication Analysis

Top Keywords

all-organic electrostrictive
4
electrostrictive polymer
4
polymer composites
4
composites low
4
low driving
4
driving electrical
4
electrical voltages
4
voltages micro-fluidic
4
micro-fluidic pump
4
pump applications
4

Similar Publications

Electroactive polymers with high dielectric constants and low moduli can offer fast responses and large electromechanical strain under a relatively low electric field with regard to theoretical driving forces of electrostriction and electrostatic force. However, the conventional electroactive polymers, including silicone rubbers and acrylic polymers, have shown low dielectric constants (ca. < 4) because of their intrinsic limitation, although they have lower moduli (ca.

View Article and Find Full Text PDF

This paper focuses on the improvement of a relaxor ferroelectric terpolymer, i.e., poly (vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) [P(VDF-TrFE-CFE)], filled with a bis(2-ethylhexyl) phthalate (DEHP).

View Article and Find Full Text PDF

Exchange coupling in P(VDF-TrFE) copolymer based all-organic composites with giant electrostriction.

Phys Rev Lett

May 2003

Department of Engineering Mechanics, University of Nebraska-Lincoln, Lincoln, Nebraska 68588-0526, USA.

In this Letter, we discuss the dramatically enhanced electrostriction and dielectric constant in an all-organic composite consisting of polyvinylidene fluoride trifluoroethylene [P(VDF-TrFE)] copolymer matrix and copper-phthalocyanine (CuPc) particles, which could not be explained by traditional composite theory. Using a Landau-type potential energy combined with energy minimization, we demonstrate that the dramatic property enhancement is due to the exchange coupling between the dielectrically hard P(VDF-TrFE) and dielectrically soft CuPc, which becomes dominant when the heterogeneity size of the composite is comparable to the exchange length. The exchange coupling is a very effective mechanism for the enhancement of functional properties in ferroelectric and dielectric systems, and its variation with various material parameters is demonstrated and discussed.

View Article and Find Full Text PDF

An all-organic composite actuator material with a high dielectric constant.

Nature

September 2002

Materials Research Institute and Electrical Engineering Department, The Pennsylvania State University, University Park, Pennsylvania 16802, USA.

Electroactive polymers (EAPs) can behave as actuators, changing their shape in response to electrical stimulation. EAPs that are controlled by external electric fields--referred to here as field-type EAPs--include ferroelectric polymers, electrostrictive polymers, dielectric elastomers and liquid crystal polymers. Field-type EAPs can exhibit fast response speeds, low hysteresis and strain levels far above those of traditional piezoelectric materials, with elastic energy densities even higher than those of piezoceramics.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!