Mesoporous nanocomposites composed of crystalline and amorphous oxides network were successfully synthesized by a continuous aerosol spray process; electrodes made from such nanocomposites with a thin-layer of protective oxide coating exhibit high capacity and long cycling life for lithium storage.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c5cc03534a | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Coupling Bifunctional Scaffolds with Slow Photon Effect for Synergistically Enhanced Photoassisted Lithium-Sulfur Battery Properties.
ACS Nano
January 2025
Institute of Flexible Electronics, Xi'an Key Laboratory of Flexible Electronics, Northwestern Polytechnical University, Xi'an 710072, China.
Photoassisted lithium-sulfur (Li-S) batteries offer a promising approach to enhance the catalytic transformation kinetics of polysulfide. However, the development is greatly hindered by inadequate photo absorption and severe photoexcited carriers recombination. Herein, a photonic crystal sulfide heterojunction structure is designed as a bifunctional electrode scaffold for photoassisted Li-S batteries.
View Article and Find Full Text PDFCellulose-Based Materials and Their Application in Lithium-Sulfur Batteries.
Polymers (Basel)
January 2025
Instituto de Investigaciones en Físico-Química de Córdoba (INFIQC), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Córdoba 5000, Argentina.
Lithium-sulfur (Li-S) batteries are promising candidates for next-generation energy storage due to their high energy density, cost-effectiveness, and environmental friendliness. However, their commercialization is hindered by challenges, such as the polysulfide shuttle effect, lithium dendrite growth, and low electrical conductivity of sulfur cathodes. Cellulose, a natural, renewable, and versatile biopolymer, has emerged as a multifunctional material to address these issues.
View Article and Find Full Text PDFInternal Integrated Temperature Sensor for Lithium-Ion Batteries.
Sensors (Basel)
January 2025
School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, China.
Lithium-ion batteries represent a significant component of the field of energy storage, with a diverse range of applications in consumer electronics, portable devices, and numerous other fields. In view of the growing concerns about the safety of batteries, it is of the utmost importance to develop a sensor that is capable of accurately monitoring the internal temperature of lithium-ion batteries. External sensors are subject to the necessity for additional space and ancillary equipment.
View Article and Find Full Text PDFPreparation of a Silicon/MXene Composite Electrode by a High-Pressure Forming Method and Its Application in Li-Ion Storage.
Molecules
January 2025
Key Laboratory of Functional Materials Physics and Chemistry, Ministry of Education, College of Physics, Jilin Normal University, Changchun 130103, China.
The main component of high-capacity silicon-based electrodes is silicon powder, which necessitates intricate processing to minimize volume growth and powder separation while guaranteeing the ideal Si content. This work uses the an situ high-pressure forming approach to create an MXene/-Si/MXene composite electrode, where MXene refers to TiCT, and -Si denotes two-phase mixed nano-Si particles. The sandwich shape promotes silicon's volume growth and stops active particles from spreading.
View Article and Find Full Text PDFEnhanced Electrochemical Performance of Dual-Ion Batteries with T-NbO/Nitrogen-Doped Three-Dimensional Porous Carbon Composites.
Molecules
January 2025
State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China.
Niobium pentoxide (T-NbO) is a promising anode material for dual-ion batteries due to its high lithium capacity and fast ion storage and release mechanism. However, T-NbO suffers from the disadvantages of poor electrical conductivity and fast cycling capacity decay. Herein, a nitrogen-doped three-dimensional porous carbon (RMF) was prepared for loading niobium pentoxide to construct a composite system with excellent electrochemical performance.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!