In this report, NH3 gas sensors based on Ag-doped γ-Fe2O3/SiO2 composite films are investigated. The composite films were prepared with a sol-gel process, and the films' electrical resistance responded to the change of NH3 concentration in the environment. The SEM and AFM investigations showed that the films had a porous structure, and the XRD investigation indicated that the size of Ag particles changed with the modification of Ag loading content. Through a comparative gas sensing study among the Ag-doped composite films, undoped composite film, γ-Fe2O3 film, and SiO2 film, the Ag-doped composite films were found to be much more sensitive than the sensors based on the undoped composite film and γ-Fe2O3 film at room temperature, indicating the significant influences of the SiO2 and Ag on the sensing property. Moreover, the sensor based on Ag-doped (4%) γ-Fe2O3/SiO2 composite film was able to detect the NH3 gas at ppb level. Conversely, the responses of the sensor to other test gases (C2H5OH, CO, H2, CH4 and H2S) were all markedly low, suggesting excellent selectivity.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jhazmat.2015.04.044 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Microwave welding with SiCNW/PMMA nanocomposite thin films: Enhanced joint strength and performance.
Nanotechnology
January 2025
Universiti Teknologi PETRONAS, Centre of Innovative Nanostructures and Nanodevices (COINN), Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, MALAYSIA, Seri Iskandar, Perak, 32610, MALAYSIA.
Most previously reported susceptors for microwave welding are in powder form. In this study, a thin-film susceptor was employed due to its uniform heating rate and ease of handling. Silicon carbide nanowhisker (SiCNW) were incorporated into a poly(methyl methacrylate) (PMMA) matrix to create a nanocomposite thin film, which served as the susceptor.
View Article and Find Full Text PDFPreparation of manganese-doped carbon quantum dots@halloysite nanotube composites films for advanced UV shielding properties.
Turk J Chem
November 2024
School of Chemical and Blasting Engineering, Anhui University of Science and Technology, Huainan, P.R. China.
The development of ultraviolet (UV) shielding materials is of great importance to protect human health and prevent the degradation of organic matter. However, the synthesis of highly efficient UV shielding polymer nanocomposites is currently limited by the agglomeration of inorganic anti-UV nanoparticles (NPs) within the polymer matrix and the limited absorption spectrum of UV shielding agents. In this study, highly effective manganese doped carbon quantum dots@halloysite nanotube composites (Mn-CDs@HNTs/PAS) were successfully synthesized by loading manganese-doped carbon quantum dots (Mn-CDs) into UV shielding effective halloysite nanotubes (HNTs) via the solvothermal method, followed by polymerization modification (PAS).
View Article and Find Full Text PDFFacile Design of Highly Stretchable and Conductive Crumpled Graphene/NiS Films for Multifunctional Applications.
Small Methods
January 2025
Fujian Provincial Key Laboratory of Functional Marine Sensing Materials, College of Material and Chemical Engineering, Minjiang University, Fuzhou, 350108, P. R. China.
The cost-effective and scalable synthesis and patterning of soft nanomaterial composites with improved electrical conductivity and mechanical stretchability remains challenging in wearable devices. This work reports a scalable, low-cost fabrication approach to directly create and pattern crumpled porous graphene/NiS nanocomposites with high mechanical stretchability and electrical conductivity through laser irradiation combined with electrodeposition and a pre-strain strategy. With modulated mechanical stretchability and electrical conductivity, the crumpled graphene/NiS nanocomposite can be readily patterned into target geometries for application in a standalone stretchable sensing platform.
View Article and Find Full Text PDFWide-Bandgap Cu(In, Ga)S Solar Cell: Mitigation of Composition Segregation in High Ga Films for Better Efficiency.
Small
January 2025
Department of Physics and Materials Science, University of Luxembourg, Esch-sur-Alzette, L-4365, Luxembourg.
Cu(In, Ga)S demonstrates potential as a top cell material for tandem solar cells. However, achieving high efficiencies has been impeded by open-circuit voltage (V) deficits arising from In-rich and Ga-rich composition segregation in the absorber layer. This study presents a significant improvement in the optoelectronic quality of Cu(In, Ga)S films through the mitigation of composition segregation in three-stage co-evaporated films.
View Article and Find Full Text PDFβ-CD-MOF-based edible antimicrobial packaging film with humidity-controlled carvacrol release for preserving fresh strawberry.
Carbohydr Polym
March 2025
Institute of Oncology, Guangxi Academy of Medical Sciences and the People's Hospital of Guangxi Zhuang Autonomous Region, Nanning 530021, China. Electronic address:
The development of safe, environmentally friendly, edible antimicrobial packaging films represents a promising alternative to conventional plastic packaging for reducing spoilage and extending the shelf life of fresh food. Here, we propose a novel strategy to construct edible β-CD-MOF/carvacrol@zein (BCCZ) composite films by intertwining β-CD-MOF loaded with the antimicrobial essential oil carvacrol, and zein. The resulting BCCZ films exhibit high humidity-triggered, long-lasting bactericidal efficacy, effective fruit preservation, and excellent biosafety.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!