Highly stretchable 2D fabrics are prepared by weaving fibers for a fabric-structured triboelectric nanogenerator (FTENG). The fibers mainly consist of Al wires and polydimethylsiloxane (PDMS) tubes with a high-aspect-ratio nanotextured surface with vertically aligned nanowires. The fabrics were produced by interlacing the fibers, which was bonded to a waterproof fabric for all-weather use for fabric-structured triboelectric nanogenerator (FTENG). It showed a stable high-output voltage and current of 40 V and 210 μA, corresponding to an instantaneous power output of 4 mW. The FTENG also exhibits high robustness behavior even after 25% stretching, enough for use in smart clothing applications and other wearable electronics. For wearable applications, the nanogenerator was successfully demonstrated in applications of footstep-driven large-scale power mats during walking and power clothing attached to the elbow.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsnano.5b02010 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A novel polymer composite from polyhexamethylene guanidine hydrochloride for high performance triboelectric nanogenerators (TENGs).
RSC Adv
January 2025
Institute for Tropical Technology, Vietnam Academy of Science and Technology 18 Hoang Quoc Viet Hanoi Vietnam
In this study, we report the successful fabrication of a novel antibacterial triboelectric nanogenerator (TENG) using a polymer composite film based on polyhexamethylene guanidine hydrochloride (PHMG). The composite materials, with optimised ingredient ratios, consist of PHMG, polyvinyl alcohol (PVA) and glutaraldehyde (GA) as a crosslinking agent (PHMG-GA-PVA). Utilising 3D printing, these composite materials were directly deposited on the conductive substrates and used as positive TENG electrodes.
View Article and Find Full Text PDFPorous structures offer several key advantages in energy harvesting, making them highly effective for enhancing the performance of piezoelectric and triboelectric nanogenerators (PENG and TENG). Their high surface area-to-volume ratio improves charge accumulation and electrostatic induction, which are critical for efficient energy conversion. Additionally, their lightweight and flexible nature allows for easy integration into wearable and flexible electronics.
View Article and Find Full Text PDFBioinspired Smart Triboelectric Soft Pneumatic Actuator-Enabled Hand Rehabilitation Robot.
Adv Mater
January 2025
Division of Intelligent and Biomechanical Systems, State Key Laboratory of Tribology in Advanced Equipment, Department of Mechanical Engineering, Tsinghua University, Haidian, Beijing, 100084, China.
Quantitative assessment for post-stroke spasticity remains a significant challenge due to the encountered variable resistance during passive stretching, which can lead to the widely used modified Ashworth scale (MAS) for spasticity assessment depending heavily on rehabilitation physicians. To address these challenges, a high-force-output triboelectric soft pneumatic actuator (TENG-SPA) inspired by a lobster tail is developed. The bioinspired TENG-SPA can generate approximately 20 N at 0.
View Article and Find Full Text PDFDevelopment and Applications in Intelligent Sports of Hydrogel-Based Triboelectric Nanogenerators.
Materials (Basel)
December 2024
Department of Public Teaching, Qilu Medical University, Zibo 255300, China.
As an emerging self-powered technology, triboelectric nanogenerators have the characteristics of a simple structure, high conversion efficiency, diverse material selection, and stable output. Hydrogels have the advantages of flexibility, extensibility, and shape adaptability, which means that hydrogel-based triboelectric nanogenerators (H-TENGs) have high flexibility, self-healing abilities, conductivity, and fatigue resistance. They can still operate normally in scenarios involving bending, pressing, stretching, and folding.
View Article and Find Full Text PDFSelf-Powered Triboelectricity-Driven Multiple-Input-Single-Output Occupancy Detection System Using a Triboelectric Nanogenerator for Energy Management.
Polymers (Basel)
December 2024
Department of Electronic Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin 17104, Republic of Korea.
An energy crisis, resulting from rapid population growth and advancements in the Internet of Things, has increased the importance of energy management strategies. Conventionally, energy management is conducted using sensors; however, additional energy is required to maintain sensor operation within these systems. Herein, an all-fiber-based triboelectric nanogenerator with O plasma treatment, graphene oxide/tannic acid solution coating, and hexane/1-octadecanethiol solution coating (AFT-OGH) is fabricated to implement a self-powered sensor, generating a high electrical power density, of 0.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!