Aims: Interventional left ventricular (LV) procedures integrating static 3D anatomy visualization are subject to mismatch with dynamic catheter movements due to prominent LV motion. We aimed to evaluate the accuracy of a recently developed acquisition and post-processing protocol for low radiation dose LV multi-phase rotational angiography (4DRA) in patients.

Methods And Results: 4DRA image acquisition of the LV was performed as investigational acquisition in patients undergoing left-sided ablation (11 men; BMI = 24.7 ± 2.5 kg/m²). Iodine contrast was injected in the LA, while pacing from the RA at a cycle length of 700 ms. 4DRA acquisition and reconstruction were possible in all 11 studies. Reconstructed images were post-processed using streak artefact reduction algorithms and an interphase registration-based filtering method, increasing contrast-to-noise ratio by a factor 8.2 ± 2.1. This enabled semi-automatic segmentation, yielding LV models of five equidistant phases per cardiac cycle. For evaluation, off-line 4DRA fluoroscopy registration was performed, and the 4DRA LV contours of the different phases were compared with the contours of five corresponding phases of biplane LV angiography, acquired in identical circumstances. Of the distances between these contours, 95% were <4 mm in both incidences. Effective radiation dose for 4DRA, calculated by patient-specific Monte-Carlo simulation, was 5.1 ± 1.1 mSv.

Conclusion: Creation of 4DRA LV models in man is feasible at near-physiological heart rate and with clinically acceptable radiation dose. They showed high accuracy with respect to LV angiography in RAO and LAO. The presented technology not only opens perspectives for full cardiac cycle dynamic anatomical guidance during interventional procedures, but also for 3DRA without need for very rapid pacing.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4882875PMC
http://dx.doi.org/10.1093/ehjci/jev120DOI Listing

Publication Analysis

Top Keywords

multi-phase rotational
8
rotational angiography
8
4dra
5
angiography left
4
left ventricle
4
ventricle assist
4
assist ablations
4
ablations feasibility
4
feasibility accuracy
4
accuracy novel
4

Similar Publications

Article Synopsis
  • Triboelectric nanogenerators (TENGs) are efficient at converting mechanical energy into electrical energy, but traditional TENGs produce AC output and have high crest factors, limiting their real-world applications.
  • The new multi-phase rotating disk triboelectric nanogenerator (MPRD-TENG) offers a low crest factor and DC output by incorporating multiple rotating disks and optimizing speed and grid arrangements to improve performance.
  • Additionally, the integration of machine learning algorithms with the MPRD-TENG's DC output data improves the accuracy of signal prediction and classification, enhancing its functionality in systems like fire alarms for early detection in offshore oil drilling operations.
View Article and Find Full Text PDF

To elucidate the distribution law of the multiphase coupling slag discharge flow field in gas-lift reverse circulation during drilling shaft sinking, a numerical analysis model of gas-liquid-solid multiphase coupling slag discharge was established by CFD-DEM (Coupling of computational fluid dynamics and discrete element method) method, taking the drilling of North Wind well in Taohutu Coal Mine as an example. This model presented the distribution of the multiphase flow field in the slag discharge pipe and at the bottom hole, and was validated through experimentation and theoretical analysis. Finally, the impact of factors, including bit rotation speed, gas injection rate, air duct submergence ratio, and mud viscosity on the slag discharge flow field was clarified.

View Article and Find Full Text PDF

Interlocking Evaluation of Mesoscopic Skeleton with the Compaction Degree of Hot-Mix Asphalt.

Materials (Basel)

August 2023

College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, China.

Asphalt mixtures are multi-phase composites composed of aggregates, bitumen, mineral powders, and voids, and various structures are intertwined during the compaction process. Most of the traditional research focuses on the macro-scale domain, and it is difficult to obtain the internal structure of asphalt mixture in different compaction processes. With the continuous development of digital image technology, the influence of the meso-structure of the asphalt mixture on the compaction quality of the asphalt mixture has become a new means to evaluate the performance of the asphalt mixture.

View Article and Find Full Text PDF

Deformation of two-phase aggregates with in situ X-ray tomography in rotating Paris-Edinburgh cell at GPa pressures and high temperature.

J Synchrotron Radiat

September 2023

Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 - UMET - Unité Matériaux et Transformations, F-59000 Lille, France.

Article Synopsis
  • A high-pressure torsion apparatus, combined with in situ X-ray tomography (XRT), allows for the investigation of microstructures in materials under large shear strains.
  • Deformation experiments on multi-phase samples were conducted at pressures of 3-5 GPa and temperatures of 300-500°C, measuring the shear strain in relation to the angles of anvil twisting.
  • The study explores 2D and 3D quantifications of microfabrics in two-phase aggregates under high shear strain, while also addressing limitations in real-time investigation using this combined technology.
View Article and Find Full Text PDF

SmartCrawler: A Size-Adaptable In-Pipe Wireless Robotic System with Two-Phase Motion Control Algorithm in Water Distribution Systems.

Sensors (Basel)

December 2022

Zachry Department of Civil and Environmental Engineering, Texas A & M University, College Station, TX 77843, USA.

Incidents to pipes cause damage in water distribution systems (WDS) and access to all parts of the WDS is a challenging task. In this paper, we propose an integrated wireless robotic system for in-pipe missions that includes an agile, maneuverable, and size-adaptable (9-in to 22-in) in-pipe robot, "SmartCrawler", with 1.56 m/s maximum speed.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!