Biomechanical Performance of Lateral Versus Dual Locking Plates for Calcaneal Fractures.

Given the high rates of wound complications with a standard lateral extensile incision, small dual incision techniques might result in less soft tissue destruction. The goal of the present study was to compare the biomechanical performance between a single locking plate and a dual locking plating system for an intra-articular calcaneal fracture model. A Sanders IIB type joint depression calcaneal fracture was created in 10 paired, fresh-frozen, cadaveric calcanei (age 47 ± 12, range 35 to 78 years). The calcanei of each pair were randomly assigned for fixation using either a lateral locking reconstruction plate or lateral and medial locking reconstruction plates. The specimens were axially loaded in cyclic fashion for 1000 cycles, followed by load to failure. The relative fragment movement was monitored optically in both the sagittal and the coronal planes. The amount of overall construct displacement increased with cycling, although no difference was found between the plating techniques. For fragment movement during cycling, the lateral joint fragment migrated anteroinferiorly along the fracture line relative to the tuberosity fragment for dual plated specimens by a small, but statistically significant, amount. This same translation was smaller for lateral plated specimens but was not found to be significant. During load to failure testing, no statistically significant differences were found for construct stiffness. A tendency was seen toward more interfragmentary motion in the sagittal plane (lateral joint fragment movement relative to the fracture line), with less movement overall in the coronal plane (anterior fragment translation and twist) for dual plating, although the difference from the lateral plate was not statistically significant. The present study demonstrated that for this calcaneal fracture model, the dual plating technique experienced a small amount of fragment translation during cycling that was significantly different statistically from that with lateral plating but was not clinically relevant. During the load to failure, the dual plating technique was comparable to the lateral plate. Thus, dual plating could be a viable biomechanical option for fracture reduction if avoidance of a large extensile lateral approach associated with lateral plating is warranted.